Instruction/ maintenance manual of the product DS-801 Sherwood
Go to page of 16
DS-801 Stereo Cassette T ape Deck Stereo Cassetten-Recorder OPERATING INSTRUCTIONS BEDIENUNGSANLEITUNG ON/STANDBY PERSONAL COMPONENT SYSTEM/STEREO CASSETTE TAPE DECK DS-801 OPEN/CLOSE.
2 ENGLISH Introduction Congratulations on Your Purchase! Your new high fidelity Cassette Tape Deck is designed to deliver maximum enjoyment and years of trouble free service. Please take a few moments to read this manual thoroughly. It will explain the features and operation of your unit and help ensure a trouble free installation.
3 ENGLISH FOR U.S.A AND CANADA ........................120 V Units shipped to the U.S.A and Canada are designed for operation on 120 V AC only. Observe all safety precautions for use of a polarized AC plug. However, some products may be supplied with a non polarized plug.
4 ENGLISH CONTENTS Introduction UNPACKING AND INSTALLATION .................................................................................................... .. 2 READ THIS BEFORE OPERATING YOUR UNIT .................................................
5 ENGLISH Rear Panel Connections • Do not plug the AC input cord into the AC outlet when plugging and unplugging connection cords. • Be sure to connect the white plugs to the L(Left) and the red plugs to the R(Right) jacks when making connections with the supplied cords.
6 ENGLISH Front Panel & System Remote Controls Front Panel Controls System Remote Controls SLEEP EDIT AUT O/MONO TUNING TUNE MODE PROGRAM AUX MD TUNER TAPE CD POWER 123 456 789 0 MEMO DOLBY C.
7 ENGLISH FLUORESCENT DISPLAY TAPE COUNTER DISPLAY RECORD INDICATOR TAPE DETECTION INDICATOR TAPE DIRECTION DISPLAY DOLBY B NR INDICATOR REVERSE MODE DISPLAY LEVEL METER DISPLAY CD SYNCHRO RECORDING INDICATOR WHEN USING THE SYSTEM REMOTE CONTROL UNIT OF RX-801R This unit can be remotely controlled with Sherwood system receiver RX-801R.
8 ENGLISH NOTES ON CASSETTE TAPE Before Operation • Before loading a cassette tape, take up the slack in the tape to prevent it from becoming entangled around the capstan. • After the recording has been finished, remove the tab to prevent the recorded contents from being erased or recorded on accidently.
9 ENGLISH Operations • To use the system remote control unit of Sherwood system receiver RX-801R, first connect the SYSTEM CONNECTOR jack of this unit to that of RX-801R.(Refer to the operating instructions of the RX-801R.) PLAYING BACK A TAPE In case of the tape recorded with Dolby B NR system, select the Dolby B NR mode.
10 ENGLISH • In case of forward playback(“ ”). • At the desired point, press the STOP or corresponding PLAY button. The automatic music search function automatically skips other musics, finds and starts playback from the desired music. Up to 99th music before or after the current music can be searched quickly on the current side.
11 ENGLISH • Be sure the erase-protection tabs on the tape are in place. • The type of tape(normal or chrome) is automatically detected. • The metal tapes are not recorded correctly. • ”B” lights up. Load a tape to be recorded. 1 RECORDING OPEN/CLOSE When recording with Dolby B NR system, select the Dolby B NR mode.
12 ENGLISH To stop recording 8 EON RDS REMOTE CONTROL UNIT RM-404 or SYSTEM REMOTE CONTROL UNIT (only for RX-801R) SLEEP EDIT AU TO /MONO TUNING TUNE MODE PROGRAM MUTE TIMER VOL VOL AUX MD TUNER TAPE CD POWER 123 456 789 0 MEMO ENTER DOLBY C.RESET TIME REPEAT RANDOM CD SYNC.
13 ENGLISH • Because CD synchro recording will start from the front side, be sure the erase-protection tab of the front side. • Only when the both of the erase-protection tabs on the tape are in place, CD synchro recording can be performed on both sides.
14 ENGLISH T roubleshooting Guide PROBLEM POSSIBLE CAUSE REMEDY No power No sound Distorted or abnormal sound Vibrating sound Too noisy No recording • The AC input cord is disconnected. • The POWER(ON/STANDBY) button is not pressed completely. • Unrecorded tape is loaded.
15 ENGLISH Specifications Type ........................................................................................ Stereo full logic cassette deck wi th Dolby B NR system Track system ..............................................................
5707-21050-008-0.
An important point after buying a device Sherwood DS-801 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sherwood DS-801 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sherwood DS-801 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sherwood DS-801 you will learn all the available features of the product, as well as information on its operation. The information that you get Sherwood DS-801 will certainly help you make a decision on the purchase.
If you already are a holder of Sherwood DS-801, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sherwood DS-801.
However, one of the most important roles played by the user manual is to help in solving problems with Sherwood DS-801. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sherwood DS-801 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
