Instruction/ maintenance manual of the product DS-10 Sherwood
Go to page of 18
DS-10(A)_ENG_090212:DS-10(A)2009-02-19오 10:43페이지1.
ENGLISH 2 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
ENGLISH 3 Intr oduction : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. T his symbol is intended to alert the user to the presence of uninsulated &quo.
FOR EUROPE ENGLISH 4 Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.
ENGLISH 5 Contents • IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 • Introduction READ THIS BEFORE OPERATING YOUR UNIT . . . . . . . . . . . . . . . . . .
ENGLISH 6 S y st em Connections • Please be certain that this unit is unplugged from the AC outlet before making any connections. • Since different components often have different terminal names, carefully read the operating instructions of the component connected.
ENGLISH 7 3. CONNECTING DC IN JACK • Plug the supplied AC adapter into the DC IN jack and then into the wall AC outlet. ■ Notes : • The AC adapter supplied with the iPod Dock is designed exclusively for use with the iPod Dock. Do not use it with another component.
ENGLISH 8 R emot e Contr ols 1. SETUP button Press this button to set the video output mode to com- posite or component. 2. MODE button Press this button to set the OSD mode to on or off. 3. MENU button Press this button to select the to music mode or the video mode.
ENGLISH 9 REMO TE CONTR OL OPERA TION R ANGE • Use the remote control within a range of about 5 meters (16 feet) and angles of up to 30 degrees aiming at the remote sensor. ■ Notes : • If the iPod Dock is placed on top of another component, the signal of remote control may be obstructed and the remote control may not work reliably.
ENGLISH 10 SETTING THE OSD MODE Oper ations • Plug in the AC adapter. • Tur n on th e TV and the rec eiver, and sele ct the c orre- spondi ng input s on TV and the receive r. • Each time the SETUP button is pressed, the video output mode is set to the composite(default) or the component.
ENGLISH 11 MUSIC MODE 1 . Press the MENU button to select the music mode. 1 . In the list, press the PAGE MODE UP( ▲ ) and DOWN( ▼ ) buttons to select a desired page mode. 2. Press the PAGE UP( ▲ ) and DOWN( ▼ ) buttons to page up or down the list.
ENGLISH 12 2. Press the UP( ▲ ) and DOWN( ▼ ) buttons to select "Shuffle Songs" and then press the SELECT button. 2. Press the UP( ▲ ) and DOWN( ▼ ) buttons to select "Now Playing" and then press the SELECT button. 1 . Press the MENU button repeatedly to select the music top menu.
ENGLISH 13 Screen Saver • You can set the time at which the screen saver is acti- vated to any one of the following four options: 1 minute, 5 minutes, 10 minutes or Off(screen saver off). When the screen saver activates, the OSD on the TV disap- pears.
ENGLISH 14 VIDEO MODE 1 . Press the MENU button to select the video mode. 2. Press the UP( ▲ ) and DOWN( ▼ ) buttons to select Movies, Music Videos, TV Shows, Video Podcasts or Rentals and then press the SELECT button. 3. To select a video and to play it, press the UP( ▲ ) and DOWN( ▼ ) buttons, and then press the SELECT button.
ENGLISH 15 • Depending on a Sherwood receiver and generation of iPod, you may also able to use following functions. ■ Note: • The connected receiver may take several seconds to startup, so you might not hear the first few seconds of the first song or video.
ENGLISH 16 • The following table shows which buttons on Sherwood receiver's remote control such as RD-7503 you can use to control your iPod while it's in the iPod Dock. Be sure to select the appropriate device mode (DOCK) first, and point your remote control at your receiver.
ENGLISH 17 T r oubleshooting Guide If a fa ult occu rs, run thr ough the tab le b elow bef ore tak ing the iPod Doc k fo r re pair . If this fai ls t o re solv e th e s itua tion , co nsul t yo ur d eale r. Unde r no cir cums tanc es s hou ld y ou a ttem pt t o re pair the iP od y ours elf.
DS-10(A)_ENG_090212:DS-10(A)2009-02-19오 10:43페이지18.
An important point after buying a device Sherwood DS-10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sherwood DS-10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sherwood DS-10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sherwood DS-10 you will learn all the available features of the product, as well as information on its operation. The information that you get Sherwood DS-10 will certainly help you make a decision on the purchase.
If you already are a holder of Sherwood DS-10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sherwood DS-10.
However, one of the most important roles played by the user manual is to help in solving problems with Sherwood DS-10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sherwood DS-10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
