Instruction/ maintenance manual of the product DD-6200 Sherwood
Go to page of 17
DD-6200(G) 2007.3.29 10:23 AM 페이지 1.
DD-6200(G) 2007.3.29 10:23 AM 페이지 1.
2 Introduction This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to consti- tute a risk of electric shock to persons.
Introduction 3 Introduction READ THIS BEFORE OPERATING YOUR UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Rear Panel Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear Panel Connections 4 REC INPUT JACKS Connect the cords between the REC INPUT jacks of this unit and the REC OUTPUT jacks of your amplifier. PLAY OUTPUT JACKS Connect the cords between the PLAY OUTPUT jacks of this unit and the PLAY INPUT jacks of your amplifier.
Front Panel Controls 5 POWER SWITCH Press this switch to turn the power on and press again to turn the power off. For system operation, plug the AC input cord into the switched AC outlet on amplifier or receiver, keep the POWER switch ON and control power ON/OFF with the power operation on the amplifier or receiver.
PAUSE BUTTON( ) Press this button to temporarily stop playing back or recording. To restart, press the PLAY button. REVERSE PLAY BUTTON( ) Press this button to play back the back side of the tape.
7 DECK B TAPE DETECTION INDICATOR MEMORY INDICATOR RELAY PLAY INDICATOR DECK B TAPE DIRECTION DISPLAY COUNTER DISPLAY CD SYNCHRO RECORDING INDICATOR HI SPEED DUBBING INDICA.
Before Operation 8 NOTES ON CASSETTE TAPE Before loading a cassette tape, take up the slack in the tape to prevent it from becoming entangled around the capstan. CLEANING THE HEAD SECTION For the best condition of the deck, always keep the head (recording/playback/erase), capstan and pinch roller clean.
Operations z 9 Each time this button is pressed, Dolby B NR or Dolby NR OFF mode is selected as follows; Each time this button is pressed, the reverse mode is selected as follows ; Only in the stop mode, the door can be opened.
10 “ ” indicator lights up. To restart playback, press the corresponding PLAY button. The second music can be searched quickly and played back. “RELAY P” lights up. To cancel the relay play, press this button. Example) When listening to the second music before or after the current music.
11 Be sure the erase-protection taps on the tape are in place. The type of tape(normal or chrome) is automati- cally detected. The metal tapes are not recorded correctely.
12 When this unit is connected to a Sherwood compatible CD player controlled remotely by the DIGI LINK III system, the CD synchro recording can be performed. During CD synchro recording, only the STOP button of the Deck A function buttons does work.
13 Select the corresponding tape length according to the loaded tape in the time counter mode. Example) When selecting the 60 minutes as tape length. Each time this button is pressed, the tape length changes as follows ; During playing or recording, the elapsed playing or recording time is displayed.
14 n each counter mode, you can reset the counter to “0000” or “00 min. 00 sec.”. Example) In the tape counter mode. Select the Deck A or the Deck B counter mode as desired. “ ” of the selected deck is flickering for 3 seconds and the corresponding deck counter mode is displayed.
T roubleshooting Guide 15 If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or our service organization. PROBLEM POSSIBLE CAUSE REMEDY No power The AC input cord is disconnected.
16 TYPE . . . . . . . . . . . . . . . . . . . . . . . . . . . Stereo full logic double cassette deck with Dolby B NR system. Track system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
An important point after buying a device Sherwood DD-6200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sherwood DD-6200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sherwood DD-6200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sherwood DD-6200 you will learn all the available features of the product, as well as information on its operation. The information that you get Sherwood DD-6200 will certainly help you make a decision on the purchase.
If you already are a holder of Sherwood DD-6200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sherwood DD-6200.
However, one of the most important roles played by the user manual is to help in solving problems with Sherwood DD-6200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sherwood DD-6200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center