Instruction/ maintenance manual of the product SI871 Sharper Image
Go to page of 20
GP ™ Silent Air Purifier Germicidal Protection SI871 Instructions INCLUDES IMPORT ANT SAFETY INFORMA TION. READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.
.
Dear Sharper Image Customer , Thank you for your purc hase of a Sharper I mage prod uct. W e a pprecia te your business very much. Our goal is that you will be completely satisf ied with this product’ s quality and performance. W e offer generous return privileges and excellent warranties on all our products.
.
W arnings ................................................................................... 6 Caution ..................................................................................... 8 F requently Asked Questions ...............................
W arnings W arning: T o reduce the risk of fire, electric shock or injury when using any electrical appliance, basic precautions should always be observed, including the following: • This appliance operates at 110V AC and 50Hz or 60Hz only . • Connect to a polarized outlet only .
or against sharp edges or corners. • K eep the cord away from heated surfaces. • A damag ed p ower cord must be r epla ced b y qu alifie d se rvi ce per sonn el on ly .
This product generates invisible ultraviolet light. T o avoid overex - posure when the lamp is on, persons must stay at least one foot away from the unit if the total duration of exposure to the unit will be more than 30 minutes per day . Shorter duration of expo- sure at close proximity is safe.
F requently Asked Questions How often is cleaning required? At least every two weeks, anytime The Sharper Image ® GP™ Silent Air P urifier makes an audible sound or the Cleaning Overdue indicator illuminates. How should it be cleaned? Wipe the removable collection grid with a damp cloth, paper towel or sponge.
F requently Asked Questions About OzoneGuard ™ What does OzoneGuard™ do? With the OzoneGuard in place, a significant portion of ground- level ozone inside the air purifier — including any trace levels of ozone by-product — is converted into oxygen before the cleaned air circulates back into the room.
General Instructions Setup and Operation Place The Sharper Image GP at least twelve inches from the wall and in a location where children cannot stare directly into the unit at a close range. Plug into a polarized 110V outlet. (Read W arnings for details.
Setup and Operation Switch the MODE CONTROL to the desired setting: L OW: F or small rooms or rooms where the door is usually closed. MEDIUM: F or average -sized rooms. HIGH: F or large rooms and higher traffic areas. T o override the MODE CONTROL setting and to run the unit at maximum power for five minutes, press BOOST .
Cleaning the Collection Grid This model features 3 highly charged collection blades separated by 2 oppositely charged “ driver ” blades. This improves the particle capture rate. Cle an t he gr id ev ery one o r tw o wee ks. As a remin der , th e Cleaning Overdue in dica tor t urns ambe r aft er t wo we eks.
Cleaning the Collection Grid 3. Use a dry or slightly damp towel or sponge to quickly wipe the dust from each of the three collection bars. 4. Before replacing the grid, invert the entire unit two or three times. Note: The grid may also be washed with warm soapy water , then rinsed.
Thorough Cleaning 3. Use a hair dryer to blow dust from the interior or a vacuum to remove dust. Note: The OzoneGuard cannot be detached from the front grill. The OzoneGuard has sharp edges; use caution when cleaning . CAUTION: Do not use the product if the ionizing wires are broken or either grill appears damaged.
Additional Information The majority of collected particles will gather on the removable stainless steel grid. Over time, debris will accumulate inside the unit. T o access the inside, remove the front and rear grills. (See section titled “Thorough Cleaning .
Germicidal Lamp Replacement Oil from fingers will reduce the germicidal performance of the UV - C lamp. If possible, use gloves or handle only by the metal area of the lamp. Otherwise, clean the lamp after installing to remove fingerprints and oils.
18 WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user ’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to P art 15 of the FCC R ule s.
19 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver . • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for assistance.
One-Y ear W arranty What Is Covered This warranty covers any defects in materials or workmanship, with the exceptions stated below . How Long Coverage Lasts This warranty runs for one year from the date of original purchase.
An important point after buying a device Sharper Image SI871 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharper Image SI871 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharper Image SI871 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharper Image SI871 you will learn all the available features of the product, as well as information on its operation. The information that you get Sharper Image SI871 will certainly help you make a decision on the purchase.
If you already are a holder of Sharper Image SI871, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharper Image SI871.
However, one of the most important roles played by the user manual is to help in solving problems with Sharper Image SI871. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharper Image SI871 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
