Instruction/ maintenance manual of the product XLUH1H Sharp
Go to page of 18
ENGLISH MODEL XL-UH1H MICRO COMPONENT SYSTEM OPERA TION MANU AL XL-UH1H Micro Component System consisting of XL-UH1H (main unit) and CP-UH1H (speaker system). Accessory Remote control x 1 Please confi rm that only the follo wing accessor y is included.
E-1 Special notes W ARNINGS: When the ON/ST AND-BY button is set at ST AND-BY position, mains voltage is still present inside the unit. When the ON/ST AND-BY button is set at ST AND-BY position, the unit may be brought into oper ation by remote control.
E-2 Red Black Left speaker Right speaker FM aerial W all socket (AC 220 - 240 V ~ 50/60 Hz) Make sure to unplug the A C power cord before making an y connections. Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 10 cm (4”) of free space along the sides, top and back of the equipment.
E-3 Note: Before using remote control, please remo ve plastic shield at battery holder. Whilst pushing the locking tab tow ards the center of the remote control, slide out the battery holder. Remov e the old batter y from the batter y holder , inser t the new battery and then slide the batter y holder back into the remote control.
E-4 General control (contin ued) Equalizer ■ When the EQU ALIZER button is pressed, the current mode setting will be display ed. T o change to a diff erent mode, press the EQU ALIZER button repeatedly until the desired sound mode appears. POPS VOCAL FLA T ROCK CLASSIC JAZZ No equalisation.
E-5 Listening to a CD or MP3/WMA disc (continued) Direct track sear ch ■ By using the Direct Search buttons, the desired tr acks on the current disc can be play ed. Use the Direct Search b uttons on the remote control to select the desired track whilst pla ying the selected disc.
E-6 Repeat steps 2 - 3 for other tr acks. Up to 32 tracks can be programmed. If you mak e a mistake, press the CLEAR button whilst the “MEMORY” indicator is fl ashing. Each time the button is pressed, one track will be cleared, beginning with last track prog rammed.
E-7 Listening to USB mass storage device/MP3 pla yer Note: This USB mass storage de vice or MP3 player is not compatible with MTP and AA C fi le systems. T o pla y back USB/MP3 player with f older mode off ■ Press the USB button on the remote control or FUNCTION button on main unit repeatedly to select USB function.
E-8 Listening to the radio T uning ■ Press the ON/ST AND-BY button to turn the power on. Press the TUNER button on the remote control or FUNCTION button on the main unit repeatedly to select tuner function. Press the TUNING ( or ) button to tune in to the desired station.
E-9 T o preset a station ■ Y ou can store 40 FM stations in memory and recall them at the push of a button. (Preset tuning) P erform steps 1 - 3 in “T uning”. Press the MEMOR Y button. Within 5 seconds, press the or button to select the preset channel number .
E-10 Using the Radio Data System (RDS) (continued) Using the Auto Station Pr ogramme Memory (ASPM) ■ Whilst in the ASPM operation mode, the tuner will automatically search for ne w RDS stations. Up to 40 stations can be stored. If you ha ve already stored some stations in memor y , the number of new stations y ou can store will be less.
E-11 Setting the cloc k (Remote control only) In this example , the clock is set for the 24-hour (00:00) display . Press the ON/ST AND-BY button to turn to stand-by mode. Press and hold the CLOCK/TIMER button until “00:00” appear . Within 10 seconds, press the or button to adjust the hour and then press the MEMOR Y button.
E-12 Sleep operation ■ The radio , compact disc and USB can all be tur ned off automatically . Play bac k the desired sound source. Press the SLEEP button. Within 5 seconds, press the SLEEP button repeatedly to select the time. SLP 120 90 60 30 15 10 5 “SLEEP” will appear.
E-13 T roubleshooting c har t General ■ Symptom P ossible cause The clock is not set to the correct time. ● Did a power f ailure occur? Reset the clock. (Ref er page 11) ● When a button is pressed, the unit does not respond. ● Set the unit to the power stand-by mode and then turn it back on.
E-14 Factory reset, clearing all memory ■ Press the ON/ST AND-BY button to enter the pow er stand-by mode. Press down the VOLUME + b utton and button on main unit until “CLR ALL ” appears . Caution: This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD prog ram.
E-15 Tu n e r ■ Frequency range FM: 87.5 - 108 MHz Speaker ■ T ype 1-wa y type speaker system 8 cm (3”) Full range Maximum input power 10 W Rated input power 5 W Impedance 4 ohms Dimensions Width: 111 mm (4 - 3/8”) Height: 194 mm (7 - 5/8”) Depth: 180 mm (7 - 1/16”) Weight 1.
E-16 FOR LOCA TION ENQUIRIES WITHIN A USTRALI A REGARDING Y OUR LOCA L SHARP APPRO VED SE RVICE CENTRE VISIT OUR WEBSITE A T www .sharp.net.au OR CALL SHARP CUSTOMER CARE 1300 135 022 SHARP CORPORA TI.
E-17 XL-UH1H_EN (Aus) A5.indd 17 XL-UH1H_EN (Aus) A5.indd 17 3/30/2010 9:35:44 AM 3/30/2010 9:35:44 AM.
An important point after buying a device Sharp XLUH1H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp XLUH1H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp XLUH1H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp XLUH1H you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp XLUH1H will certainly help you make a decision on the purchase.
If you already are a holder of Sharp XLUH1H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp XLUH1H.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp XLUH1H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp XLUH1H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center