Instruction/ maintenance manual of the product XLHF201P Sharp
Go to page of 16
ENGLISH MODEL XL-HF201P ( BK ) / XL-HF301P ( T ) HI FI COMPONENT SYSTEM OPERATION MANUAL XL-HF201P(BK) Hi Fi Component System consisting of XL-HF201P(BK) (main unit) and CP-HF200 (speaker system). XL-HF301P(T) Hi Fi Component System consisting of XL-HF301P(T) (main unit) and CP-HF301 (speaker system).
E-1 SPECIAL NOTES CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
E-2 IMPORTANT SAFETY INSTRUCTIONS (continued) 11) Only use attachments/accessories specifi ed by the manuf acturer . 12) Use only with the car t, stand, tripod, brack et, or table specifi ed b y the manuf acturer , or sold with the apparatus.
E-3 For U.S. customer only CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when ship in its or.
E-4 System connections (continued) Speaker connection For XL-HF201P(BK) Connect the blac k wire to the minus (–) terminal, and the red wire to the plus (+) terminal. For XL-HF301P(T) Connect the wire without insulation tube to the minus (–) terminal, and the wire with red insulation tube to the plus (+) terminal.
E-5 Muting The volume is muted tempor arily when pressing the button on the remote control. Press again to restore the volume. X-Bass control When the power is fi rst turned on, the unit will enter the extra bass mode which emphasizes the bass frequencies, and “X-Bass On” will appear .
E-6 To remove adaptor for iPod or iPhone Inser t the tip of a screwdriv er (“-” type , small) into the adaptor hole as shown and lift upward to remov e.
E-7 Listening to a CD or MP3/WMA disc Disc playback Press the ON/ST AND-BY button to turn the power on. 1 Press the CD button on the remote control or FUNCTION b utton 2 repeatedly on the main unit to select CD function. Press the OPEN/CLOSE button to open the disc tra y .
E-8 Random play The tracks on the disc can be pla yed in random order automatically . To random play all tracks: Press RANDOM button on the remote control until “Random” appears. Press the (CD/USB ) button. To cancel random play: Press the RANDOM button again.
E-9 Listening to USB mass storage device/MP3 player Note: This product is not compatible with MTP and AA C fi le systems from USB mass storage de vice or MP3 play er . Procedure to playback MP3/WMA disc with folder mode on T o play bac k CD-R/RW .
E-10 Advanced USB playback The following functions are the same as CD operations: Page Direct track search .......................................................................................8 Repeat play ...........................................
E-11 To scan the preset stations The stations sav ed in the memory can be scanned automatically . (Preset memory scan) Press the PRESET 1 ( or ) button f or more than 0.5 seconds. The preset number will fl ash and the programed stations will be tuned in sequentially , for 5 seconds each.
E-12 When the preset time is reached, playbac k will star t. The 12 volume will increase gr adually until it reaches the preset volume . The timer indicator will b link during timer playback. When the timer end time is reached, the system will enter the 13 power stand-b y mode automatically .
E-13 Headphones Do not turn the volume on to full at switch on and listen to music at moderate le vels. Excessive sound pressure from earphones and headphones can cause hear ing loss. Before plugging in or unplugging the headphone , reduce the volume .
E-14 Factory reset, clearing all memory Press the ON/ST AND-BY button to enter the power stand-b y mode. 1 While pressing down the OPEN/CLOSE button, press the ON/ST AND- 2 BY button until “Clear All” appears. Caution: This operation will erase all data stored in memory including clock, timer settings, and tuner preset.
E-15 Tuner Frequency range FM: 87.5 - 108 MHz AM: 530 - 1,710 kHz Preset 40 (FM and AM station) Speaker Type 2-wa y type speaker system 1” (2.
An important point after buying a device Sharp XLHF201P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp XLHF201P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp XLHF201P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp XLHF201P you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp XLHF201P will certainly help you make a decision on the purchase.
If you already are a holder of Sharp XLHF201P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp XLHF201P.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp XLHF201P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp XLHF201P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
