Instruction/ maintenance manual of the product SJ-RM323T Sharp
Go to page of 12
SJ-RM323T Device of this mark is a trademark of Sharp Corporation. Plasmacluster is a registered trademark or a trademark of Sharp Corporation. REFRIGERA T OR - FREEZER OPERA TION MANUAL CONTENTS W ARNING • ................................. 2 CAUTION • .
2 Household use only. Thank you very much for buying this SHARP product. Before using your SHARP refrigerator, please read this operation manual to ensure that you gain the maximum benet from it. ■ This refrigerator contains ammable refrigerant (R600a: isobutane) and insulation blowing gas (cyclopentane).
3 INSTALLATION WARNING ■ Do not install the refrigerator in a damp or wet location as this may cause damage to the insulation. Condensation may also build on the cabinet and cause rust.
4 DESCRIPTION 1. LED lights 2. Hybrid cooling panel (Aluminum panel) The panel is cooled from the rear, thus indirectly cooling the refrigerator compartment. In this way, food is refrigerated gently, without exposing it to cold air ow. 3. Refrigerator shelves (2 pcs.
5 OPERATION Control panel 1. Display for temperature setting The preset temperature of selected compartment is displayed. It is not the actual temperature in the compartment. 2. Display for controlling temperature The temperature of the refrigerator and the freezer can be adjusted independently to each other.
6 Controlling Temperature The refrigerator controls its temperature automatically. However, if needed, adjust the temperature as follows. Refrigerator compartment Adjustable between 0°C and 6 °C in steps of 1 °C . 1 Press the select button and select icon.
7 Power Failure While this feature is operating, it will indicate the rise of inside temperature which may be caused by power failure. 1 Press the select button and select the power failure icon. (The icon is orange.) 2 Press the button. [ : ON, : OFF ] 3 Press the button.
8 Sound ON/OFF Use this feature to turn off the sound of key operation. 1 Press the button and button simultaneously and continuously for 3 seconds or more. To set sound "ON" Press the button and button simultaneously and continuously for 3 seconds or more again.
9 STORING FOOD Refrigeration reduces the rate of food spoilage. To maximize the shelf life of perishable food products, ensure that the food is the freshest possible quality.
10 CARE AND CLEANING BEFORE YOU CALL FOR SERVICE WARNING ■ Unplugtherefrigeratorrsttopreventelectricshock. ■ Do not splash water directly on the outer cabinet or the interior. This may lead to rusting and deterioration of the electrical insulation.
(B140)_Book.indb 11 2010/09/30 9:05:09.
TINS-B140CBRZ 10KK TH 1 Printed in Thailand SHARP CORPORATION (B140)_Book.indb 12 2010/09/30 9:05:09.
An important point after buying a device Sharp SJ-RM323T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp SJ-RM323T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp SJ-RM323T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp SJ-RM323T you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp SJ-RM323T will certainly help you make a decision on the purchase.
If you already are a holder of Sharp SJ-RM323T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp SJ-RM323T.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp SJ-RM323T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp SJ-RM323T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
