Instruction/ maintenance manual of the product SPC 420 Avocent
Go to page of 2
Reboot or Power Cycle Data Center Devices with the Avocent Secure Power Management over IP Solution The Avocent SPC power management over IP solution sets new standards in the way you securely monitor and manage power to your business-critical servers and other data center network devices.
Avocent, the Avocent logo, DSView, DSR and MergeP oint are registered trademarks of Avocent Corporation or its affi liates in the U.S. and other countries. All other marks are the pr operty of their respective owners. Copyright © 2009. Avocent Corporation.
An important point after buying a device Avocent SPC 420 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Avocent SPC 420 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Avocent SPC 420 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Avocent SPC 420 you will learn all the available features of the product, as well as information on its operation. The information that you get Avocent SPC 420 will certainly help you make a decision on the purchase.
If you already are a holder of Avocent SPC 420, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Avocent SPC 420.
However, one of the most important roles played by the user manual is to help in solving problems with Avocent SPC 420. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Avocent SPC 420 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
