Sharp PN-V602 Flat Panel Television manual

Summary of contents each page of manual

Page 1

PN-V602 LCD MONIT OR OPERA TION MANUAL.
Page 2

IMPORT ANT : T o aid reporting in case of loss or theft, please record the product’s model and serial numbers in the space provided. The numbers are located in the rear of the product.
Page 3

3 E IMPORT ANT INFORMA TION W ARNING:  TOREDUCE THERISKOFFIREORELECTRICSHOCK,DONOTEXPOSE THISPRODUCT TORAINORMOISTURE. RISKOFELECTRIC SHOCK DONOTOPEN CAUTION CAUTION:  TOREDUCE THERISKOFELECTRIC SHOCK,DONOTREMOVECOVER.
Page 4

4 E IMPORT ANT INFORMA TION (Continued) A. Information on Disposal for Users (private households) 1. In the European Union Attention:Ifyouwanttodisposeofthisequipment,please.
Page 5

5 E ThankyouforyourpurchaseofaSHARPLCDproduct. T oensuresafetyandmanyyearsoftrouble-freeoperationofyour product, please read the Safety Precautions carefully before using this product.
Page 6

6 E SAFETY PRECAUTIONS (Continued)  19. Batteries—Incorrectuseofbatteriesmaycausethebatteriestoburstorignite. A leakybatterymaycorrodetheequipment, dirty your hands or spoil your clothing.
Page 7

7 E - The TFTcolorLCDpanelusedinthismonitorismadewith theapplicationofhighprecisiontechnology .However ,there may be minute points on the screen where pixels never light or are permanently lit.
Page 8

8 E MOUNTING PRECAUTIONS • Thisproductisforuseindoors. • A mountingbracketcompliantwithVESA specicationsis required. • Sincethemonitorisheavy ,consultyourdealerbefore installing, removing or moving the monitor .
Page 9

9 E Contents Supplied Components If any component should be missing, please contact your dealer .  LiquidCrystalDisplayMonitor:1  Cableclamp:2  Powercord:1  CD-ROM�.
Page 10

10 E n Front view 1 23 45 6 7 8 9 The rear buttons if seen from the front 1. LCD panel 2. INPUT button 3. MENU button 4. VOL -/Cursor control ( ) button 5. VOL +/Cursor control ( ) button 6. BRIGHT -/Cursor control ( ) button 7. BRIGHT +/Cursor control ( ) button 8.
Page 11

11 E Part Names n Remote control unit (Supplied with the PN-ZR01 (optional)) 1 2 3 4 5 6 7 12 9 10 11 8 1. Signal transmitter 2. POWER button 3. MUTE button 4. VOL +/Cursor control ( ) button 5. BRIGHT -/Cursor control ( ) button 6. DISPLA Y button 7.
Page 12

12 E 11 10 9 81 23 45 7 12 6 15 14 13 17 16 Expansion Board When the PN-ZB02 (optional) is attached Caution • Besuretoturnoffthemainpowerswitchanddisconnect the plug from the power outlet before connecting/ disconnecting cables.
Page 13

13 E Connecting Peripheral Equipment TIPS • Thelengthofthesignalcablesorsurroundingenvironment mayaffecttheimagequality . • Thescreenmaynotdisplayproperlywhenusingterminals otherthanPCDVI-D/A VDVI-Dfortheinputmode.
Page 14

14 E ■ Connection with RS-232 cable IfyouconnectthemonitorinadaisychainusingRS-232 cable, using the monitor buttons on the primary (main unit), settings are copied to the secondary (expansion unit) and operation from the primary can perform operation for all monitors.
Page 15

15 E Connecting the Power Cord Caution • Useonlythepowercordsuppliedwiththemonitor . 1.T urnof fthemainpowerswitch. 2.Plugthepowercord(supplied)intothe ACinputterminal. 3.Plugthepowercord(supplied)intothe ACpoweroutlet.
Page 16

16 E Binding Cables The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamps. Insert the cable clamp into the cable clamp attachment on the rear of the monitor and fasten the cables. : Cable clamp attachment Cable clamp Cable Cable clamp attachment Removing the Handles The handles can be removed.
Page 17

17 E T urning Power On/Off Caution • T urnonthemonitorrstbeforeturningonthePCor playback device. T urning on the main power Main power switch Caution • Themainpowermustbeturnedon/offwiththemainpower switch.
Page 18

18 E Basic Operation Whenperformingoperationofmultiplemonitorswiththe remotecontrolunit,rstsettheremotecontrolunittothe appropriateremotecontrolmode(seepage21).
Page 19

E 19 5. BRIGHT +/- (Backlight adjustment) Pressing or displaystheBRIGHTmenuwhenthe menu screen is not displayed. BRIGHT 15 Press or toadjustthebrightness. * Ifyoudonotpressanybuttonsforabout4seconds,the BRIGHTmenuautomaticallydisappears.
Page 20

E 20 Basic Operation n Switching the screen size Evenwhenthescreensizeischanged,thedisplaymayremainthesamedependingontheinputsignal. WIDE PCinput Displaysimagesoitllstheentirescreen.
Page 21

21 E Remote Control Mode Withtheremotecontrolunitit’spossibletoperformoperation of... • Theprimarymonitor • MonitorswithaspeciedIDNo. • Allprimary/secondarymonitors It’s necessary to specify which type of operation will be performed in advance.
Page 22

22 E Menu Items Displaying the menu screen Videoandaudioadjustmentandsettingsofvariousfunctions are enabled. This section describes how to use the menu items.
Page 23

E 23 Menu item details The menu will differ depending on the input mode. n SCREEN Y ou can move the menu screen display position each time DISPLA Y is pressed. AUTO (PC D-SUB/PC RGB) TheCLOCK,PHASE,H-POS,andV -POSareautomatically adjusted.
Page 24

E 24 USER AdjustseachitemwhentheWHITEBALANCEissetto USER. R-CONTRAST .... Adjustsbright-tonedredcomponent. G-CONTRAST .... Adjustsbright-tonedgreencomponent. B-CONTRAST .... Adjustsbright-tonedbluecomponent.
Page 25

E 25 Menu Items BRIGHTNESS SENSOR (When connected to the PN-ZR01 (optional) only) WhensettoONorON:DISPLA Y ,thebrightnesswill automatically change according to the lighting and surrounding brightness. Performs operation with the primary monitor .
Page 26

E 26 Menu Items n OPTION DA TE/TIME SETTING Set the date and time. Press or to select the date and time, and press or to change the numerical values. Setthedatein“Month/Day/Y ear”order . Setthetimeona12-hourbasis.(Factorydefault) DA TE/TIME FORMA T Sets the date/time display format.
Page 27

E 27 Menu Items n MUL TI ENLARGE (See page 28.) Sets whether or not to use the enlarge function. ADV ANCED (ENLARGE) ENLARGEH/ENLARGEV ......... Sets the number of screen splits (number of monitors)inthehorizontal/verticaldirectionusedfor the enlargement.
Page 28

E 28 n Dual screen display Y oucandisplaythescreensofthePCinputsignaland A V input signal simultaneously . Setthisfunctionwith“PIPMODES”inthePIP/PbyP menu. PIP Main screen Sub screen A sub s cree n is displ ayed inside a main screen.
Page 29

E 29 n ZOOM2 SPECIAL SETTING If you connect a laptop computer with any of the following screen resolutions and black bands appear around the screen,setZOOM2SPECIAL SETTINGofINPUTSIGNAL on theOPTIONmenutoONandthenselectZOOM2intheSIZE setting.
Page 30

E 30 n ADV ANCED items (A V input) (See page 23 for additional Menu item details.) FLESH TONE Adjustthehuecontrol. 3D-NR Reduce the noise of playback images on video. Settingahigherlevelreducesmorenoise.However ,itmay cause blurring on an image.
Page 31

31 E Y oucanreturnthesettingstotheirfactory-presetvaluesand restrict operations. 1. If using the remote control unit, press SIZE until “F” is displayed in the upper left area of the screen, then while “F” is being displayed, press , , , and in that order .
Page 32

32 E Controlling the Monitor with a PC (RS-232C) Y oucancontrolthismonitorfromaPCviaRS-232C(COM port)onthePC.
Page 33

E 33 Controlling the Monitor with a PC (RS-232C) n Response code format When a command has been executed correctly O K Return code (0D H , 0A H ) A response is returned after a command is executed.
Page 34

E 34 Controlling the Monitor with a PC (RS-232C) Advanced operation This section explains commands for daisy chain connection. The basic communication procedure is the same as in the “One-to-oneconnectionwithaPC”section. n ID numbers Y oucanassignauniqueIDnumbertoeachmonitor(see page 24).
Page 35

E 35 Controlling the Monitor with a PC (RS-232C) IDLK ........ TheparameterofthiscommandsetstheID numberofthemonitor . Themonitorissubjecttoall subsequentcommands. Example: IDLK0002 ← Followingcommandsareforthemonitor withIDnumber:2.
Page 36

E 36 n Repeater control command RepeatercontrolisachievedbysettingtheFOURTH CHARACTERoftheparameterto“+”. Example: VOLM030+ ← Setsvolumeofallmonitorsto30. In repeater control, responses are returned by all the connected monitors.
Page 37

E 37 RS-232C command table How to read the command table Command: Commandeld(Seepage32.) Direction: W Whenthe“Parameter”issetintheparametereld(seepage32),thecommandfunctionsasdescribed under“Control/ResponseContents”.
Page 38

E 38 SCREEN menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) AUTO ASNC W 1 WhentheinputmodeisPCD-SUB,PCRGB. - ○ ○ CLOCK CLCK WR 0-1200 0-1200 WhentheinputmodeisPCD-SUB,PCRGB.
Page 39

E 39 PICTURE menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) AUTO AGIN W 1 WhentheinputmodeisPCD-SUB,PCRGB. - ○ ○ ANALOGGAIN ANGA WR 0-127 0-127 WhentheinputmodeisPCD-SUB,PCRGB.
Page 40

E 40 AUDIO menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) TREBLE AUTR WR -5-5 -5-5 ○ ○ ○ BASS AUBS WR -5-5 -5-5 BALANCE AUBL WR -10-10 -10-10 RESET ARST .
Page 41

E 41 Controlling the Monitor with a PC (RS-232C) OPTION menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) DA TE/TIMESETTING DA TE WR AABBCCDDEE AABBCCDDEE AA:�.
Page 42

E 42 MUL TI menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) ENLARGE ENLG WR 0-1 0-1 0:OFF ,1:ON - ○ ○ ENLARGEMODE EMAG WR 0-4 0-4 0:OFF ,1.
Page 43

E 43 PIP/PbyP menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) PIPMODES MWIN WR 0-3 0-3 0:OFF ,1:PIP ,2:PbyP ,3:PbyP2 ○ ○ ○ PIPS.
Page 44

E 44 Others Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) SCREENSIZE(PC) WIDE WR 1-5 1-5 1:WIDE,2:NORMAL,3:DotbyDot,4:ZOOM1,5:�.
Page 45

45 E WhenthePN-ZB02(optional)isattached,yourmonitorcan beconnectedtoaLANallowingyoutocontrolitfromaPCon the LAN. Y oucanalsocongurethemonitortosende-mailnotication when it has a problem.
Page 46

46 E 46 ■ T o set from a PC WhenthemonitorisconnectedtoaPC,LANsettingscanbe conguredviaPC. Set up process (1)ConnectyourmonitortoaPC.
Page 47

47 E 47 7. Specifythe“DHCPCLIENT”,“IP  ADDRESS”,etc. DHCP CLIENT IfyourLANhasaDHCPserverandyouwishtoobtainan address automatically , change this setting to “ON”. T osettheaddressmanually ,setthisto“OFF”.
Page 48

48 E 48 ■ INFORMA TION Information about this monitor appears. ■ CONTROL Y ou can control the operations corresponding to the buttons ( POWER INPUT SIZE )ontheremotecontrolunit.(Seepages18 and19.) TIPS • Instandbymode,PowerONistheoperationavailable.
Page 49

49 E 49 ■ NETWORK (LAN SETUP) This screen allows you to set the settings necessary when the monitor is connected to a LAN. DHCP CLIENT IfyourLANhasaDHCPserverandyouwishtoobtainan address automatically , change this setting to “ON”.
Page 50

50 E 50 ■ NETWORK (GENERAL) This screen allows you to specify the general LAN settings. MONITOR NAME Specify a name for this monitor as it should appear on the InternetExplorerscreen. AUTO LOGOUT TIME Specify the time (in minutes) to elapse before automatically disconnecting this monitor from the network.
Page 51

51 E 51 ■ MAIL (RECIPIENT) Thisscreenallowsyoutospecifytherecipientsofthee-mail sent periodically or when the monitor has an error . RECIPIENT E-MAIL ADDRESSES Specifythee-mailaddressestosenderrornoticatione-mail to.
Page 52

52 E 52 Controlling the Monitor with a PC (LAN) ■ SNMP Y oucanconguresettingsrelatedtoSNMP . SNMP SETTING Set whether to enable or disable SNMP . VERSION Set the version of the SNMP to be supported. COMMUNITY NAME 1 to 3 Setthenameofthecommunityrequiredfortheaccess.
Page 53

53 E T roubleshooting If you are experiencing any problem with your display , before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Isthepowercorddisconnected?(Seepage15.
Page 54

54 E 54 The Power LED is ashing in red and green alternately . When “TEMPERA TURE” is displayed in the corner of the screen. • Whentheinternaltemperatureofthemonitorrises excessively , the brightness of the backlight decreases automaticallyinordertopreventhigh-temperature- relatedproblems.
Page 55

55 E Specications n PN-V602 Product Specications Model PN-V602 LCDcomponent 60"Class[60inch(152.4cm)diagonal]TFT LCD Max. resolution (pixels) 1366x768 Max. colors Approx.16.77Mcolors Pixel pitch 0.973mm(H)×0.
Page 56

56 E Specications n Dimensional Drawings Note that the values shown are approximate values. Unit: inch [mm] 52-5/8 [1335.9] Opening width (52-5/16 [1329.4]) Opening height (29-7/16 [747.7]) 29-1 1/16 [754.2] 7-7/8 [200] 5-7/8 [149.3] 52-5/8 [1335.9] 3-5/8 [92.
Page 57

57 E n Compatible signal timing (PC) VESA Wide US TEXT Sun Screen resolution Hsyn c V syn c D ot frequency Digital 640 × 480 800 × 600 848 × 480 1024 × 768 1 152 × 864 *1 1280 × 768 1280 × 800 .
Page 58

58 E n Compatible signal timing (A V) Screen resolution Frequency DVI-D* 2 HDMI Component 1920×1080p * 1 24Hz - Ye s - 50Hz Ye s Ye s Ye s 59.94Hz Ye s Ye s Ye s 60Hz Ye s Ye s Ye s 1920×1080i * 1 50Hz Ye s Ye s Ye s 59.94Hz Ye s Ye s Ye s 60Hz Ye s Ye s Ye s 1280×720p 50Hz Ye s Ye s Ye s 59.
Page 59

59 E Specications n PC/A V DVI-D input terminal pins (DVI-D 24 pin) No. Function No. Function 1 TMDSdata2- 13 N.C. 2 TMDSdata2+ 14 +5V 3 TMDSdata2/4shield 15 GND 4 N.C. 16 Hot-plugdetection 5 N.C. 17 TMDSdata0- 6 DDCclock 18 TMDSdata0+ 7 DDCdata 19 TMDSdata0/5shield 8 N.
Page 60

PN-V602MuEN1 1H(1).

Read the Sharp PN-V602 manual - avoid problems

An important point after buying a device Sharp PN-V602 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:

to know how to properly use the device
to know how to perform maintenance/ periodic checks of correct operation of the product Sharp PN-V602
to know what to do in case of failure Sharp PN-V602

If you have not bought Sharp PN-V602 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp PN-V602 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp PN-V602 you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp PN-V602 will certainly help you make a decision on the purchase.

If you already are a holder of Sharp PN-V602, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp PN-V602.

However, one of the most important roles played by the user manual is to help in solving problems with Sharp PN-V602. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp PN-V602 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center

Sharp PN-V602 manual

Share URL

Similar manuals

Share URL

Similar manuals

Summary of contents each page of manual

Page 1

Page 2

Page 3

Page 4

Page 5

Page 6

Page 7

Page 8

Page 9

Page 10

Page 11

Page 12

Page 13

Page 14

Page 15

Page 16

Page 17

Page 18

Page 19

Page 20

Page 21

Page 22

Page 23

Page 24

Page 25

Page 26

Page 27

Page 28

Page 29

Page 30

Page 31

Page 32

Page 33

Page 34

Page 35

Page 36

Page 37

Page 38

Page 39

Page 40

Page 41

Page 42

Page 43

Page 44

Page 45

Page 46

Page 47

Page 48

Page 49

Page 50

Page 51

Page 52

Page 53

Page 54

Page 55

Page 56

Page 57

Page 58

Page 59

Page 60

Read the Sharp PN-V602 manual - avoid problems

Other manuals from the category Flat Panel Television

NEC V462

Samsung 20080329123748812

Samsung 2033SN

Samsung 203B

Samsung 2233RZ

Samsung 2233SN

Samsung 2243SWX

Samsung 242MP

Samsung 2433BW

Samsung 244T