Instruction/ maintenance manual of the product PN-S655 Sharp
Go to page of 30
PN-S655 LCD MONIT OR OPERA TION GUIDE.
2 E Basic Operation ............................................................... 3 Menu Items ....................................................................... 5 Displaying the menu screen ......................................... 5 Menu item details .
3 E Basic Operation 1 2 3 4 5 6 7 8 1. INPUT (Input mode selection) The menu is displayed. Press or to select the input mode, and press to enter . * Y ou can select the input terminal by pressing the input switch of the monitor .
E 4 Basic Operation n Switching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE PC input Displays image so it lls the entire screen. A V input An image with a 4:3 aspect ratio is stretched to ll the entire screen.
5 E Menu Items Displaying the menu screen Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu items. See pages 6 to 8 for details of each menu items. n Example of operation (Adjusting CONTRAST in the PICTURE menu) 1.
E 6 Menu item details The menu will differ depending on the input mode. n SCREEN AUTO (PC3/PC4) The CLOCK, PHASE, H-POS, and V -POS are automatically adjusted.
E 7 n SETUP OSD H-POSITION Adjusts the horizontal display position of menu screen. OSD V -POSITION Adjusts the vertical display position of menu screen.
E 8 Menu Items AUTO OFF Sets the display method when no signals for the sub screen are input in PIP , PbyP , or PbyP2 mode. MANUAL ....... Displays a main screen and a black sub screen.
E 9 Menu Items n Enlarge • Y ou can align several monitors and integrate them into a single large screen to display . • Up to ve monitors can be aligned in both the longest and shortest directions. • Each monitor displays enlarged views of separated images.
E 10 Menu Items Caution • Do not switch off the main power after setting the SCHEDULE. • Specify the correct date and time. (See page 7.) SCHEDULE does not function unless the date and time are specied. • Check regularly that the set date and time are correct.
11 E Y ou can return the settings to their factory-preset values and restrict operations. 1. After pressing SIZE for about 5 seconds, press , , , and in that order . OFF UNLOCKED ON ON LED OFF FUNCTION 1/1 ALL RESET ADJUSTMENT LOCK RS-232C/LAN OSD DISPL AY LED TEMPERA TURE A LERT ST A TUS ALERT END … [MENU] 2.
12 E Controlling the Monitor with a PC (RS-232C) Y ou can control this monitor from a PC via RS-232C (COM port) on the PC. Y ou can also connect multiple monitors via a daisy chain by using a PC. By assigning ID numbers to each monitor (see page 13), you can make input mode selection/adjustment or can check the status of a specic monitor .
E 13 Controlling the Monitor with a PC (RS-232C) n Response code format When a command has been executed correctly O K Return code (0D H , 0A H ) A response is returned after a command is executed.
E 14 Controlling the Monitor with a PC (RS-232C) n Commands for ID control The command examples shown on this page assume the following connection and ID number set up. ID number: 1 ID number: 2 ID number: 3 ID number: 4 IDST ......... A monitor receiving this command sets its own ID number in the parameter eld.
E 15 Controlling the Monitor with a PC (RS-232C) n Repeater control This system has a function to allow setting of multiple monitors connected in a daisy chain using a single command. This function is called repeater control. Y ou can use Repeater control function without assigning ID numbers.
E 16 RS-232C command table How to read the command table Command: Command eld (See page 12.) Direction: W When the “Parameter” is set in the parameter eld (see page 12), the command functions as described under “Control/Response Contents”.
E 17 PICTURE menu Function Command Direction Parameter Reply Control/Response contents * AUTO AGIN W 1 When the input mode is PC3, PC4. - CONTRAST CONT WR 0-60 0-60 0-127 on PC3/PC4. B BLACK LEVEL BL VL WR 0-60 0-60 0-127 on PC3/PC4. TINT TINT WR 0-60 0-60 COLORS COLR WR 0-60 0-60 SHARPNESS SHRP WR 0-24 0-24 ADV ANCED (When the input mode is A V .
E 18 SETUP menu Function Command Direction Parameter Reply Control/Response contents * OSD H-POSITION OSDH WR 0-100 0-100 B OSD V -POSITION OSDV WR 0-100 0-100 LANGUAGE LANG WR 14 14 ENGLISH B 1 1 DEU.
E 19 ENLARGE menu (When the input mode is PC) Function Command Direction Parameter Reply Control/Response contents * ENLARGE MODE EMAG WR 0-4 0-4 0: OFF , 1: 2 x 2, 2: 3 x 3, 3: 4 x 4, 4: 5 x 5 - EMHV.
E 20 Controlling the Monitor with a PC (RS-232C) Others Function Command Direction Parameter Reply Control/Response contents * SCREEN SIZE (PC) WIDE WR 1-5 1-5 1: WIDE, 2: NORMAL, 3: Dot by Dot, 4: ZO.
21 E Y our monitor can be connected to a LAN allowing you to control it from a PC on the LAN. Y ou can also congure the monitor to send e-mail notication when it has a problem. The connection requires a commercially available LAN cable (UTP cable, Category 5, straight through).
22 E 22 ■T osetfromaPC When the monitor is connected to a PC, LAN settings can be congured via PC. Set up process (1) Connect your monitor to a PC (2) Specify the PC’s IP address.
23 E 23 5. Click on “LAN SETUP” under NETWORK. 6. Specify the “DHCP CLIENT”, “IP ADDRESS”,etc. DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically , change this setting to “ON”. T o set the address manually , set this to “OFF”.
24 E 24 ■INFORMA TION Information about this monitor appears. ■CONTROL Y ou can control the operations corresponding to the buttons ( POWER INPUT SIZE ) on the remote control unit. (See page 3.) TIPS • In standby mode, Power ON is the operation available.
25 E 25 ■NETWORK(LANSETUP) This screen allows you to set the settings necessary when the monitor is connected to a LAN. DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically , change this setting to “ON”.
26 E 26 ■NETWORK(GENERAL) This screen allows you to specify the general LAN settings. MONITOR NAME Specify a name for this monitor as it should appear on the Internet Explorer screen. AUTO LOGOUT TIME Specify the time (in minutes) to elapse before automatically disconnecting this monitor from the network.
27 E 27 ■MAIL(RECIPIENT) This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error . RECIPIENT E-MAIL ADDRESSES Specify the e-mail addresses to send error notication e-mail to. CONDITION Specify the conditions to send mails.
28 E 28 Controlling the Monitor with a PC (LAN) ■ SERVICE&SUPPORT (URL INFORMA TION) Y ou can display a specic URL in the URL INFORMA TION eld on the INFORMA TION screen when an error occurs in the monitor . (See page 24.) URL INFORMA TION Enter a URL to display when an error occurs on the monitor .
29 E 29 M E M O.
PN-S655 G EN08F(1).
An important point after buying a device Sharp PN-S655 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp PN-S655 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp PN-S655 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp PN-S655 you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp PN-S655 will certainly help you make a decision on the purchase.
If you already are a holder of Sharp PN-S655, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp PN-S655.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp PN-S655. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp PN-S655 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
