Instruction/ maintenance manual of the product LC-42LE320E Sharp
Go to page of 32
OPERA TION MANUAL Contents The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly fr om • the actual operations. ENGLISH Contents ......................................................
Cleaning—Unplug the AC cord from the AC outlet befor e cleaning the product. Use a damp cloth to • clean the product. Do not use liquid cleaners or aerosol cleaners. Water and moistur e—Do not use the product near water , such as bathtub, washbasin, kitchen sink, • laundry tub, swimming pool and in a wet basement.
Introduction (POWER) Press to turn the LCD TV on or enter standby mode. b (INPUT SOURCE) Select an input source. 0-9 DIGIT BUTTONS T o select a TV channel directly . EPG Press this button to display electronic pr ogramme guide when watching digital channels.
Introduction TV (Front view) (On) indicator Remote control sensor TV (Rear view) 22” 19” 26” POWER button Volume buttons MENU button COMMON INTERF ACE slot Composite (A V IN, A V/LR) Earphone Ou.
Preparation Supplied accessories Operati on Manual Quick Setup Guide Operation Manual Quick Setup Guide AC cord (x1) Product shape varies in some countries Remote control (×1) AAA battery (×2) x 3 1.
Preparation Installation of batteries Insert two AAA batteries into Remote control. 1. Make sure ( k ) and ( l ) ar e facing the proper direction. Replace the cover . 2. NOTE If the remote contr ol will not to be used for a long • time, remove the batteries to avoid r emote control damage.
Quick guide Initial installation overview Follow the below steps one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. Preparation Connect antenna cable to the antenna terminal.
Quick guide 6. Start searching channels Initial Setup Channel Scan First, please connect antenna. Next Select Back Skip Scan 0 % Scan Exit EXIT Start channel scan now? If you skip this setup, the channel scan could be performed in Menu. Initial Setup Channel Scan The channel scan may take a while to complete.
W atching TV Daily operation T ur ning on/off the power Press on the TV . Switch it off by pr essing on the TV . Changing channels With P <> : Standby mode E T o standby mode If the TV set is switched on, you can switch it to standby by pressing B on the r emote control.
W atching TV EPG (Electronic Pr ogramme Guide) EPG is an on-screen guide that displays scheduled digital TV programmes. This guide is not available with analogue channels. Y ou can navigate, select and view programmes. There ar e two types of EPG, “Now and Next” and “7 or 8 day” EPG.
W atching TV T eletext What is T eletext? T eletext broadcasts pages of information and entertainment to specially equipped television sets. Y our TV receives T eletext signals broadcast by a TV network, and decodes them into graphical format for viewing.
Film mode: · Automatically detects a film- based source (originally encoded at 24 or 25 frames per second, depending on the vertical frequency), analyses it and then recreates each still film frame for high- definition picture quality . [Effect] — MJC effect selection.
Press 3. <> to select one of the following settings: Equalizer 120Hz (Bass): • Adjusts the amount of bass. Equalizer 500Hz (T enor): • Adjusts the amount of tenor . Equalizer 1.5KHz (Neutral): • Adjusts the amount of neutral. Equalizer 5KHz (T reble): • Adjusts the amount of treble.
TV menu Step 3: Automatic channel scan Y our TV searches and stores all available digital and analogue TV channels as well as all available digital radio channels.
TV menu Press 2. <> to select Analogue Manual Scan and press OK or ≥ to enter . Menu Search for analogue channels Start Frequency (MHz) Scan Up Scan Down 45.00 Sound Picture TV Eco Back EXIT Features Parental In the 3. Start Frequency (MHz) box, enter the frequency by using the digit buttons on the remote contr ol.
TV menu Press 1. MENU on the remote contr ol and select TV ≥ Channels. NOTE Y ou are prompted to enter curr ent password to enter • Channels if Channel Block / Parental Guidance / Input Block in the Parental menu is not the default setting. Press 2.
NOTE Constant use of the • Normal picture format can cause screen distortion. Zoom 1 (Not for HD) Scales the classic 4:3 format to 14:9. Zoom 2 (Not for HD) Scales the classic 4:3 format to 16:9. Wide Stretches the classic 4:3 format to 16:9. NOTE When source input is PC mode, only Full screen and 4:3 • are available.
TV menu Set the clock E Press 1. MENU on the remote contr ol and select Features ≥ Time . Press 2. OK or ≥ to enter Time menu. Press 3. <> to select Time and press OK or ≥ to enter .
Press 1. MENU on the remote contr ol and select Features > Subtitle. Press 2. OK or ≥ to enter Subtitle . Press 3. <> to select 1st Subtitle or 2nd Subtitle . Highlight your selection and press 4. ≤≥ to select a subtitle language. Follow the on-screen instructions to exit.
DivX® Deactivation (VOD) E Y ou can find your deactivation code on this menu. Y ou need to deactivate the TV at www .divx.com to release the registration. Press 1. MENU on the remote contr ol and select Features ≥ DivX® Deactivation . Press 2. OK or ≥ to enter .
Lock one or more connected devices Disable the specific external input signals. Enter your password to access the 1. Parental menu. Press 2. <> to select Input Block and press OK or ≥ to enter the input source list Press 3. <> to select one or more input sour ce.
Connecting a USB device USB function This TV is equipped with a USB connector that enables you to view photos, listen to music, and play videos stored on a USB storage device. NOTE Depending on the USB device, the TV may not be able • to recognise the contained data.
Connecting a USB device Buttons Descriptions G button Select the slide show duration. Y button Select the slide show transition effect. EXIT Retur n to the previous operation. Listen to Music E In the 1. Music thumbnail browser , press <>≤≥ to select a music file or a music album.
Connecting external devices HDMI connection Example of connectable devices E DVD E Blu-ray player/recorder The HDMI connections (High Definition Multimedia Interface) permit digital video and audio transmission via a connection cable from a player/r ecorder .
Example of connectable devices E VCR E DVD recorder E When using the SCART 2 Half SCART , which transmits S-Video or CVBS in, and CVBS monitor out. SCART 2 32” 37” 42” NOTE In cases when the decoder needs to receive a signal • from the TV , make sure to select the appr opriate input source.
Connecting external devices Connecting a PC Digital connection HDMI DVI PC HDMI 32” 37” 42” 19” 22” 26” 19” 22” 26” 32” 37” 42” Analogue connection DVI-I PC HDMI VGA 19” 22.
Appendix Problem Possible Solution No picture 1. Connect power cord correctly . 2. T urn on power . 3. Connect signal cable correctly . 4. Press any button on the LCD TV . Abnormal colours Connect signal cable correctly . T wisted picture 1. Connect signal cable correctly .
Appendix Item 19 o LCD COLOUR TV , Model: LC-19LE320E 22 o LCD COLOUR TV , Model: LC-22LE320E 26 o LCD COLOUR TV , Model: LC-26LE320E LCD screen size 19 o diagonal 22 o diagonal 26 o diagonal Number o.
Appendix Item 32 o LCD COLOUR TV , Model: LC-32LE320E 37 o LCD COLOUR TV , Model: LC-37LE320E 42 o LCD COLOUR TV , Model: LC-42LE320E LCD screen size 32 o diagonal 37 o diagonal 42 o diagonal Number o.
Appendix Environmental specifications Cautions regar ding use in high and low temperature environments When the unit is used in a low temperature space (e.g. room, of fice), the picture may leave trails or appear slightly • delayed. This is not a malfunction, and the unit will recover when the temperature r eturns to normal.
Information on the software license for this pr oduct Software composition The software included in this pr oduct is comprised of various software components whose individual copyrights are held by SHARP or by thir d parties.
A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and ele.
An important point after buying a device Sharp LC-42LE320E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp LC-42LE320E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp LC-42LE320E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp LC-42LE320E you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp LC-42LE320E will certainly help you make a decision on the purchase.
If you already are a holder of Sharp LC-42LE320E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp LC-42LE320E.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp LC-42LE320E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp LC-42LE320E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
