Instruction/ maintenance manual of the product LC-40LE700UN Sharp
Go to page of 62
SHARP ELECTRONICS CORPORA TION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORA TION Printed in Mexico Imprimé au Mexique Impreso en México TINS-E262WJZZ 09P07-MX-NM LC-40LE700UN LC-46LE700U.
Unit: inch (mm) Dimensional Drawings LC-52LE700UN 15 3 / 4 (400) 15 3 / 4 (400) 6 57 / 64 (175) 48 3 / 4 (1238) 30 1 / 8 (765) 32 13 / 64 (818) 2 3 / 32 (53) 45 9 / 16 (1157.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert.
INFORMA TION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pr ovide reasonable pr otection against harmful interference in a r esidential installation.
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This pr oduct has been engineered and manufactur ed with the highest priority on safety . However , impr oper use can result in electric shock and/or fir e.
IMPORTANT SAFETY INSTRUCTIONS 4 • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
IMPORTANT SAFETY INSTRUCTIONS 5 CHILD SAFETY : It Makes A Differ ence How and Where Y ou Use Y our Flat Panel Display Congratulations on your purchase! As you enjoy your new pr oduct, please keep these safety tips in mind: THE ISSUE The home theater entertainment experience is a growing trend and larger fl at panel displays are popular purchases.
6 1 Confi rm that there are 12 screws (all the same size) supplied with the stand unit. 2 1 Set the post for the stand unit onto the box. 2 Attach the base to the post. 3 Insert and tighten the 8 screws into the 8 holes on the bottom of the base. • Hold the stand unit securely with one hand, and then tighten the screws.
7 QUICK REFERENCE Using the Remote Control Unit Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation.
8 Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set.
9 Contents IMPORTANT INFORMATION ..................... 1 Trademarks ....................................... 2 DEAR SHARP CUSTOMER ....................... 3 IMPORTANT SAFETY INSTRUCTIONS ........ 3 - 5 Supplied Accessories ............................ 6 QUICK REFERENCE Attaching the Stand .
10 Part Names TV (Front) OPC sensor * (See page 21.) POWER indicator (See page 14.) Remote control sensor OPC indicator (See page 21.) TV (Rear/Side) AC INPUT terminal INPUT 3 terminals USB terminal I.
11 3 2 11 8 5 6 4 9 21 19 20 22 23 7 24 11 10 25 12 14 13 27 28 29 16 15 17 31 26 30 8 Part Names 1 TV POWER: Switch the TV power on or enter standby. (See page 14.) 2 DISPLAY: Display the channel information. 3 SOURCE POWER: Turns the power of the external equipment on and off.
12 Connecting to External Equipment For connecting the TV to external equipment, use commercially available cables. CAUTION • To protect equipment, always turn off the TV before connecting any external equipment. • Please read the relevant operation manual (Blu-ray disc player, etc.
13 Connecting to External Equipment HDMI Connection AUDIO HDMI OUT HDMI-certifi ed cable HDMI-DVI conversion cable INPUT 5, 6, 7 or 8 INPUT 6 Ø 3.5 mm stereo minijack cable When using HDMI-DVI conversion cable: • When using an HDMI-DVI conversion cable, input the audio signal to the AUDIO terminal of INPUT 6.
14 4 When " Air " is selected in Antenna setting: Press c / d to select "Start", and then press ENTER . When " Cable " is selected in Antenna setting: Press a / b to sele.
15 Direct Button Operation Sleep Timer Allows you to set a time when the TV automatically switches to standby. Press SLEEP . • The remaining time displays when the sleep timer has been set. • Each time you press SLEEP , the remaining time switches as shown below.
16 AV MODE AV MODE gives you several viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment. Press AV MODE .
17 1/3 ENG 2/3 CC1 3/3 T ext1 Off POWER SAVING Allows you to set the Power Saving level in order to decrease the power consumption and increase the backlight lifespan. Press POWER SAVING . • Each time you press POWER SAVING , the mode changes as shown below.
18 Direct Button Operation VIEW MODE You can select the screen size. 1 Press VIEW MODE . • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or a / b while the View Mode menu is displayed to select a desired item on the menu.
19 ENTER : Select : Enter MENU : Exit RETURN : Back 1 Item displayed in yellow • This indicates the item currently selected. • Press ENTER to go to the adjustment screen for this item. 2 Item in brackets • This indicates the current setting for the item.
20 On-Screen Display Menu Menu Items Setup Menu EZ Setup ............................................ Page 24 * 3 CH Setup ........................................... Page 24 * 3 Antenna Setup-DIGITAL ..................... Page 24 * 3 Input Skip .....
21 On-Screen Display Menu OPC Setting Automatically adjusts the brightness of the screen. Off: The brightness is fi xed at the value set in "Backlight". On: Automatically adjusts. On: Display: Displays the OPC effect on the screen while adjusting the brightness of the screen.
22 Fine Motion Enhanced Use Fine Motion Enhanced to view fast-action video more clearly. On: For obtaining a clearer image. Off: Normal image. • Fine Motion Enhanced may cause image noise. If this occurs, turn the function "Off". Active Contrast Automatically adjusts the image contrast according to the scene.
23 On-Screen Display Menu Audio Menu You can adjust the sound quality to your preference with the following settings. Example Audio T reble Bass Balance Surround Bass Enhancer Reset [Off] [On] a 15 L b 15 [ 0] [ 0] [ 0] a 15 b 15 R 1 Press MENU to display the MENU screen, and then press c / d to select "Audio".
24 Setup Menu Example CH Setup Antenna Setup-DIGIT AL EZ Setup Input Skip Parental CTRL Position Language Reset [English] Blue Illumination [On] Setup 1 Press MENU to display the MENU screen, and then press c / d to select "Setup". 2 Press a / b to select a specifi c adjustment item, and then press ENTER .
25 Position For adjusting a picture's horizontal and vertical position. H-Pos.: Centers the image by moving it to the left or right. V-Pos.: Centers the image by moving it up or down. • For resetting adjustments to the factory preset values, press a / b to select "Reset", and then press ENTER .
26 On-Screen Display Menu V-Chip V-CHIP is an electronic fi ltering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable.
27 ■ Canadian French Ratings Example MP AA TV Guidelines Can. English Ratings Can. French Ratings 8ans+ 13ans+ 16ans+ 18ans+ NONE G E Press a / b to adjust the item to your desired position. " " indicates the item is blocked. Press MENU to exit.
28 On-Screen Display Menu Option Menu Audio Only PC Audio Select Output Select AQUOS LINK Setup Caption Setup Digital Caption Info. Program Title Display Favorite CH Game Play Time Operation Lock Out .
29 Color System Select the video signal system compatible with your equipment from the list below: Auto/NTSC/PAL-M/PAL-N • "Color System" can only be set for the INPUT 1 VIDEO, INPUT 2 S-VIDEO and INPUT 3 VIDEO. • If you have already set the Secret No.
30 Digital Setup Menu This setting allows you to optimize the settings of Digital broadcasting. Communication Setup Interactive Service Identification Audio Setup Software Update [Y es] [PCM] Digital.
31 During the data checking, “ Checking ” blinks. Checking Now checking the data in the USB memory device. • The current version of the TV software and the version of the update fi le on the USB memory device are displayed. To update the TV software with the update fi le, select “Yes”, and then press ENTER .
32 Enjoying photo and music playback You can enjoy viewing photos and listening to music from external USB memory devices. Depending on the USB memory device, the TV may not be able to recognize the recorded data. Use only alphanumeric characters for naming fi les.
33 Enjoying photo and music playback Photo Mode When there are invalid photo fi les, the X mark will be displayed for the fi le. You can see the fi le name, shooting date, fi le size and pixel size of the selected photo in the lower-left corner of the screen (shooting date is only available in the EXIF fi le format).
34 Enjoying photo and music playback USB Menu * The display varies depending on the selected mode. When Photo mode is selected, "Change to Music Mode" is displayed. When Music mode is selected, "Change to Photo Mode" is displayed. Change to Photo Mode/Music Mode Change the mode.
35 Enjoying photo and music playback Select Slide Show Background Music You can select the music to be played in the background while the slide show is being displayed. 1 Press D to display the USB MENU screen. 2 Press a / b to select "Select Slide Show BGM", and then press ENTER .
36 Presetting Remote Control Function You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function of your remote control unit.
37 Manufacturer codes REMOTE CONTROL CODE NUMBER Other Viewing Options VCR BRAND REMOTE CONTROL CODE NUMBER DVD/BD/LD BRAND REMOTE CONTROL CODE NUMBER CATV/SAT BRAND • Numbers marked with * are SAT codes, all others are CATV codes. AUDIO BRAND REMOTE CONTROL CODE NUMBER LC-52_46_40LE700UN_E.
38 Using AQUOS LINK Controlling HDMI Equipment Using AQUOS LINK What’s AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate compatible system equipment (Blu-ray disc equipment, AV amplifi er, DVD).
39 AQUOS LINK Setup 1 Press MENU to display the MENU screen, and then press c / d to select "Option". 2 Press a / b to select “AQUOS LINK Setup”, and then press ENTER . 3 Press a / b to select a specifi c item, and then press ENTER . 4 Press a / b (or c / d ) to select the desired setting, and then press ENTER .
40 AQUOS LINK Menu Recorder EPG T op menu/title list Media change By AQUOS AUDIO SP By AQUOS SP Sound mode change Setup menu Model select AQUOS LINK Timer Recording You can call up the AQUOS LINK-compatible recorder’s EPG and preset timer recordings using the TV’s remote control.
41 Playback of Titles Using AQUOS LINK This section explains how to play back a title in the AQUOS LINK-compatible equipment. 1 Power on the AQUOS LINK-compatible equipment, and select appropriate external input. 2 Press OPTION to display the AQUOS LINK MENU screen.
42 Using a PC When using HDMI cable: AUDIO HDMI OUT AUDIO HDMI-certifi ed cable HDMI-DVI conversion cableI INPUT 6 Ø 3.5 mm stereo minijack cable When using analog RGB cable: When using RS-232C serial control cable: • When connecting a PC to the INPUT 4, set "PC Audio Select" to "Input 4 (PC)".
43 VIEW MODE You can select the screen size. 1 Press VIEW MODE . The View Mode menu displays. The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or a / b while the View Mode menu is displayed to select a desired item on the menu.
44 Using a PC 1 Press MENU to display the MENU screen, and then press c / d to select the Setup or Option menu. For adjusting "Auto Sync." or "Fine Sync.", select the Setup menu. For setting "PC Audio Select", select the Option menu.
45 ■ PC control of the TV • Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections. This operation system should be used by a person who is accustomed to using computers.
46 Up to four devices can be connected to the HN-VA400U adapter. Internet Model number Number of ports HN-VA401SU 4 + 1 HN-VA400U 4 HN-VA100U 1 Using the Internet By connecting your TV to a broadband system, you can access the Internet from the TV.
47 Using the Internet + If you cannot connect to the Internet Perform the procedures below to check your TV's network settings. Ethernet Setup 1 Press EXIT to display the normal TV screen. 2 Press MENU to display the MENU screen, and then press c / d to select “Digital Setup”.
48 Entering Text (Software Keyboard) When you are editing an input screen or specifying the Ethernet settings used for accessing the Internet, enter text from the software keyboard. You can enter up to 128 characters for text. • Buttons Description a Moves the focus up.
49 Using the Browser ENTER , a / b / c / d • Press a / b / c / d to select a link that you want to jump, and then press ENTER . EXIT • Press the button to return to the TV screen. RETURN • Press the button to return to the previous page. Example : The image shown below, which is only for explanation, is subject to change.
50 Using the Toolbar You can use the toolbar to control the browser and to specify settings. 1 Press D on the remote control unit to display the toolbar. 2 Press c / d to select a function, and then press ENTER . Selected item Description Displays the linked page in a new tab.
51 Saving the URL of the Current Page Adding a web page to your bookmarks allows you to return to that page later by simply selecting it from your list of bookmarks. 1 Display the page that you want to bookmark. 2 Press D on the remote control unit to display the toolbar.
52 Browser Settings You can check or modify your browser settings from the Browser menu. The Browser menu includes a display settings menu and a security settings menu. 1 Press D to display the toolbar. 2 Press c / d to select “ ” in the toolbar, and then press ENTER .
53 Appendix Removing the Stand • Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal. CAUTION • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. Before attaching/detaching the stand • Before performing work, make sure to turn off the TV.
54 Appendix Troubleshooting Problem Possible Solution No power • Check if you pressed TV POWER on the remote control unit. Page 14 If the indicator on the TV does not light up, press POWER on the TV. Is the AC cord disconnected? Page 7 Has the power been turned on? Page 14 • • • Unit cannot be operated.
Item Model: LC-40LE700UN Model: LC-46LE700UN Model: LC-52LE77UN LCD panel 40 o Class (40 o Diagonal) Advanced Super View & BLACK TFT LCD 46 o Class (45 63 / 64 o Diagonal) Advanced Super View &.
56 • As a precautionary measure, make a note of your secret number above, cut it from this manual, and keep it in a safe place. The secret number is .
57 CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORA TION warrants to the first consumer purchaser that this Sharp brand Liquid Crystal Display pr oduct (the “Product”), when shipped in its ori.
Dimensional Drawings Unit: inch (mm) LC-40LE700UN LC-46LE700UN 15 3 / 4 (400) 6 57 / 64 (175) 43 9 / 32 (1099) 29 11 / 64 (741) 27 3 / 32 (688) 2 3 / 32 (53) 40 19 / 64 (1023.
Unit: inch (mm) Dimensional Drawings LC-52LE700UN 15 3 / 4 (400) 15 3 / 4 (400) 6 57 / 64 (175) 48 3 / 4 (1238) 30 1 / 8 (765) 32 13 / 64 (818) 2 3 / 32 (53) 45 9 / 16 (1157.
SHARP ELECTRONICS CORPORA TION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORA TION Printed in Mexico Imprimé au Mexique Impreso en México TINS-E262WJZZ 09P07-MX-NM LC-40LE700UN LC-46LE700U.
An important point after buying a device Sharp LC-40LE700UN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp LC-40LE700UN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp LC-40LE700UN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp LC-40LE700UN you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp LC-40LE700UN will certainly help you make a decision on the purchase.
If you already are a holder of Sharp LC-40LE700UN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp LC-40LE700UN.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp LC-40LE700UN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp LC-40LE700UN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
