Instruction/ maintenance manual of the product LC-32S7E Sharp
Go to page of 26
LC-19S7E LC-26S7E LC-32S7E LCD COLOUR TELEVISION LCD-F ARBFERNSEHGERÄT TÉLÉVISEUR COULEUR À ÉCRAN CRIST AUX LIQUIDES (LCD) TELEVISORE A COLORI LCD LCD-KLEURENTELEVISIE TELEVISIÓN EN COLOR LCD TELEVISOR LCD A CORES SHARP ELECTRONICS (Europe) GmbH Sonnistraße 3, D-20097 Hambur g, Deutschland SHARP CORPORA TION http://www .
SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-r ewireable (moulded) plug incorporating a 5A fuse. Should the fuse need to be replaced, a BSI or AST A approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug, must be used.
1 OPERA TION MANUAL ENGLISH The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly fr om • the actual operations. ENGLISH Contents .....................................................
2 Cleaning—Unplug the AC cord from the AC outlet befor e cleaning the product. Use a damp cloth • to clean the product. Do not use liquid cleaners or aerosol cleaners. Water and moistur e—Do not use the product near water , such as bathtub, washbasin, kitchen • sink, laundry tub, swimming pool and in a wet basement.
3 Introduction ECO EPG YPbPr PR LIST FREEZE MENU /EXIT P PRE PR 1 B POWER Press to turn the LCD TV on or enter standby mode. 2 b (INPUT SOURCE) Select an input source. 3 0-9 DIGIT BUTTONS T o select a TV channel directly . 4 EPG <Not available> 5 PRE PR T o display the previous selected TV channel.
4 Introduction SCART VGA AUDIO PC IN 75Ω L R VIDEO AV OUT L R Y Pb Pr COMPONENT AC IN SCART VG AA UDIO PC IN 75Ω L R VIDEO AV OU T L R Y Pb Pr COMPONENT AV IN VIDEO L R SERVICE 1 SCART 1 SCART 2 V.
5 W all mounting Mount the TV Stand 3 19” 26” 32” W H T V sc r ee n si ze ( In ch e s) VESA-compatible wa ll b r ac ket (millimeters) ( W x H) Sc r ew t y pe 19 ” 100 x 100 mm Me tri c 4 x 10 .
6 Preparation Use the remote contr ol unit by pointing it towards the remote contr ol sensor . Objects between the remote control unit and sensor may pr event proper operation. 30° 30° EC O EP G YPbP r PR LIST FREEZE MENU /EXIT PRE PR P Using the remote contr ol unit Installation of batteries Insert two AAA batteries into Remote control.
7 Quick guide Initial installation overview Follow the below steps one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. Preparation 1 Power on and run the auto installation 2 W atch TV 3 Connect antenna cable to the antenna terminal.
8 W atching TV Press a on the TV . Switch it off by pr essing a on the TV . B ind ic ato r Status Off Powe r of f Green Power o n Red St and by TV indicator status Selecting external video source Once.
9 W atching TV T eletext What is T eletext? T eletext broadcasts pages of information and entertainment to specially equipped television sets. Y our TV receives T eletext signals broadcast by a TV network, and decodes them into graphical format for viewing.
10 TV menu Use smart picture Press 1. VIDEO (ADJ) . The Smart picture menu appears. Press 2. oœ to select one of the following smart picture settings. • Persona l • Vivid • Standard • Movie • Game • Eco Press 3. OK to confirm you choice.
11 TV menu When source input is PC mode, only 4:3, Wide screen and Unscaled ar e available. Change picture format Change the picture format to suit your content. Press 1. f on your remote contr ol. Alternatively , press MENU and select Pictur e > Picture format .
12 TV menu Use smart sound Use smart sound to apply pre-defined sound settings. Press 1. AUDIO (ADJ) . The Smart sound menu appears. Press 2. oœ to select one of the following smart sound settings. • Standard: Adjusts sound settings to suit standard environments and types of audio.
13 TV menu Automatically switch the TV to standby (Sleeptimer) Sleeptimer switches the TV to standby after a defined period of time. Press 1. MENU . Select 2. Feature> Sleeptimer . The Sleeptimer menu appears. Press 3. pπ to set the sleep time.
14 TV menu NOTE If you select • Lock , you have to enter your code every time you turn on your TV . Once you set the code, step 3 and 4 won’t appear • before turn off the TV . Lock or unlock one or more channels When watching TV , press 1.
15 TV menu The first time you set up your TV , you are prompted to select a menu language and to install TV . This chapter provides instructions on how to r einstall and fine tune channels. Automatically install channels This section describes how to search and stor e channels automatically .
16 TV menu Manually install channels This section describes how to search and stor e analogue TV channels manually . Press 1. MENU . Select 2. Installation > Channel install. > Analogue: Manual The Analogue: Manual menu appears. Press 3. oœ to select the item you want to adjust.
17 TV menu Press 6. OK to confirm each of the characters. NOTE Rename channels- the length of the name is limited to • six characters. Use • Aa to change upper -case letter to lower -case letter and vice versa.. Rearrange channels After you install channels, you can rearrange the or der in which they appear .
18 Connecting external devices E Before connecting ... Be sure to turn off the TV and any devices befor e • making any connections. Firmly connect a cable to a terminal or terminals. • Carefully r ead the operation manual of each external • device for possible connection types.
19 E When using the SCART 1 Full SCART , which transmits RGB , and CVBS in, and CVBS tuner out. SCART 1 SCART 2 SCART Example of connectable devices E Decoder Example of connectable devices E VCR E DV.
20 Connecting external devices Connecting a PC HDMI Connection VGA AUDI O PC IN L Y Pb Pr COMPONENT V G A AUDI O P C I N L Y Pb Pr COMPONENT VGA AUDIO PC IN L R Y Pb Pr COMPONENT L R Y Pb Pr COMPONENT.
21 Appendix Problem Possible Solution No picture 1. Connect power cord corr ectly . 2. T urn on power . 3. Connect signal cable correctly . 4. Press any button on the LCD TV . Abnormal colours Connect signal cable correctly . T wisted picture 1. Connect signal cable correctly .
22 Appendix Item 19 o LCD COLOUR TV , Model: LC-19S7E, 26 o LCD COLOUR TV , Model: LC-26S7E 32 o LCD COLOUR TV , Model: LC-32S7E LCD screen size 19 o diagonal 26 o diagonal 32 o diagonal Number of dot.
23 Cautions regar ding use in high and low temperature environments When the unit is used in a low temperature space (e.g. room, of fice), the picture may leave trails or appear slightly • delayed. This is not a malfunction, and the unit will recover when the temperature r eturns to normal.
24 A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and .
An important point after buying a device Sharp LC-32S7E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp LC-32S7E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp LC-32S7E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp LC-32S7E you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp LC-32S7E will certainly help you make a decision on the purchase.
If you already are a holder of Sharp LC-32S7E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp LC-32S7E.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp LC-32S7E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp LC-32S7E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
