Instruction/ maintenance manual of the product LC-32LE530E Sharp
Go to page of 42
LCD COLOUR TELEVISION OPERA TION MANUAL ENGLISH 5 0 1 8 5 7 7 3 SHARP ELECTRONICS (Europe) GmbH Sonninstraße 3, D-20097 Hamburg SHARP CORPORA TION http://www .
English - 1 - Contents Features ................................................................. 3 Dear SHARP customer ........................................... 3 Introduction ............................................................. 3 Preparation .
English - 2 - SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fi tted with a non-rewireable (moulded) plug incorporating a 5A fuse. Should the fuse need to be replaced, a BSI or AST A approved BS 1362 fuse marked ASA or and of the same rating as above, which is also indicated on the pin face of the plug, must be used.
English - 3 - Features Remote controlled colour LCD TV . • Fully integrated T errestrial digital-cable TV (DVB- • T -C- MPEG2) (DVB-T-C MPEG4). HDMI connectors for digital video and audio. This • connection is also designed to accept high de fi nition signals.
English - 4 - Important safety precautions Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean • the product. Do not use liquid cleaners or aerosol cleaners. Use a soft damp cloth to gently wipe the panel when it is dirty .
English - 5 - Safety Precautions Read the following recommended safety precautions carefully for your safety . Power Source The TV set should be operated only from a 220-240V AC, 50Hz outlet. Ensure that you select the correct voltage setting for your convenience.
English - 6 - LCD Screen The LCD panel is a very high technology product with about a million thin fi lm transistors, giving you fi ne picture details. Occasionally , a few non-active pixels may appear on the screen as a fi xed blue, green or red point.
English - 7 - Package Contents SLEEP SCREEN PRESETS LANG. FAV EPG SWAP SOURCE C DISP . SEARCH MODE INFO CH V Remote Control LCD TV Batteries: 2 X AAA Instruction Book Quick Guide 1 X Video & Audio Connection Cable Note: Y ou should check the accessories after purchasing.
English - 8 - Remote Control Buttons Standby 1. Image size / Zooms videos (in Media Browser 2. video mode) Sleep T imer 3. Mono / Stereo - Dual I-II / Currrent Language (*) 4. (in DVB channels) Favourite Mode Selection (in DVB channels) 5. Numeric buttons 6.
English - 9 - LCD TV and Operating Buttons FRONT and REAR VIEW Control buttons VIEW Control Buttons 1. Standby/On button 2. TV/A V button 3. Programme Up/Down buttons 4. V olume Up/Down buttons Note: Press “ ” and buttons at the same time to view main menu.
English - 10 - to the television with an appropriate antenna cable, as shown in the illustration in the following pages. PC Input 7. is for connecting a personal computer to the TV set. Connect the PC cable between the PC INPUT on the TV and the PC output on your PC HDMI 1: HDMI Input 8.
English - 1 1 - Using USB Inputs USB Connection Y ou can connect a USB hard disk drive or USB • memory stick to your TV by using the USB inputs of the TV . This feature allows you to play fi les stored in a USB drive or record programmes. 2.5” and 3.
English - 12 - Connecting to a DVD Player If you want to connect a DVD player to your LED TV , you can use connectors of the TV set. DVD players may have different connectors. Please refer to your DVD player ’s instruction book for additional information.
English - 13 - Using Side A V Connectors Y ou can connect a range of optional equipment to your LCD TV using side connectors of the TV . For connecting a camcorder or camera , you should • use AV socket (side). T o do this, you must use the supplied video/audio connection cable .
English - 14 - If the TV will not be used for a long period i.e. • holidays, then unplug the power cord from the mains socket. Input Selection Once you have connected external systems to your TV , you can switch to different input sources. Press “SOURCE” button on your remote control consecutively for directly changing sources.
English - 15 - Y ellow button: Display EPG data in accordane with timeline schedule Blue button (Filter): Views fi ltering options. (RECORD): the TV will start to record the selected progamme. Y ou can press again to stop the recording. Up/Down/Left/Right: Navigate.
English - 16 - T o cancel an already set recording, highlight that • programme and press the OK button and select the option “ Delete Rec. Timer ”. The recording will be cancelled. Note: Y ou cannot switch to any other channel or source while there is an active recording on the current channel.
English - 17 - Note: Y ou can press “MENU” button to cancel. After all the available stations are stored, Channel • List will be displayed on the screen. If you like the sort channels, according to the LCN,please select “Y es” and than press “OK”.
English - 18 - Digital Cable Manual Search In cable manual scan, you can enter frequency , modulation, symbol rate and network channel scan options. After selecting search type as Digital Cable, you can set the desired options and press OK button to search.
English - 19 - Select YES and press OK to continue or select NO and press OK button to cancel. Managing Stations: Channel List The TV sorts all stored stations in the Channel List. Y ou can edit this channel list, set favourites or set active stations to be listed by using the Channel List options.
English - 20 - Managing Stations: Favourites Y ou can create a list of favourite programmes. Press • “MENU” button to view main menu. Select Channel List item by using “ ” or “ ” button. Press OK to view menu contents. Select • Favourites to manage favourite list.
English - 21 - Viewing V ideos via USB When you select Videos from the main options, available video fi les will be fi ltered and listed on this screen. Y ou can use “ ” or “ ” button to select a video fi le and press OK button to play a video.
English - 22 - to enable all. Y ou can follow the disabled functions with the change of the icons. Previous/Next (Left/Right buttons) : Jumps to previous or next fi le on slideshow . Rotate (Up/Down buttons) : Rotates the image using up/down buttons.
English - 23 - Subtitle Position : Sets subtitle position as up or down. Subtitle Font Size : Sets subtitle font size (max. 54pt). DivX® Registration Code: Some DivX® Video-On- Demand fi les require registration code, this code can be used for this purpose.
English - 24 - Available playback options: Play from start: Plays the recording from the • beginning. Resume: Recommences the recordings. • Play from offset: Speci fi es a playing point. • Note: Viewing main menu and menu items will not be available during the playback.
English - 25 - Panoramic This stretches the left and right sides of a normal picture (4:3 aspect ratio) to fi ll the screen, without making the picture appear unnatural. The top and bottom of the picture are slightly cut off. Cinema This zooms up the wide picture (16:9 aspect ratio) to the full screen.
English - 26 - High or Off. While Movie Sense is active, it will optimize the TV’ s video settings for motional images to acquire a better quality and readibility . When Movie Sense option is set to Low , Med or High, Movie Sense demo option will be available.
English - 27 - Note : Equalizer menu settings can be changed manually only when the Equalizer Mode is in User . Balance : This setting is used for emphasizing left or right speaker balance.
English - 28 - Con fi guring Language Preferences Y ou can operate the TV’s language settings using this menu. Press “MENU” button and select the fi fth icon by using “ ” or “ ” button.
English - 29 - Note: If the Country option is set to France, you can use 4725 as the default code. After coding the correct PIN number , parental settings menu will be displayed: Parental Settings Menu Operation Select an item by using “ • ” or “ ” button.
English - 30 - Recording Con fi guration Select Recording Con fi guration item in the Settings menu to con fi gure recording settings. The following menu is displayed for recording con fi guration.
English - 31 - Select • Sources in the Settings menu and press OK button. Press“ • ” or “ ” buttons to select a source. Use “ • ” or “ ” button to enable or disable the selected source.
English - 32 - will be unavailable.T o use Standby search please make sure that you select Standby Search as On. If the Standby Search is set to On, when the TV is in standby mode, available broadcasts will be searched.
English - 33 - Tips Screen Care : Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the coating layer of the TV screen. For your safety , unplug the mains plug when cleaning the set. When moving the TV , hold it properly from the bottom part.
English - 34 - Appendix A: PC Input T ypical Display Modes The display has a maximum resolution of 1360 x 768. The following table is an illustration of some of the typical video display modes. Y our TV may not support different resolutions. Supported resolution modes are listed below .
English - 35 - Appendix C: Supported DVI Resolutions When connecting devices to your TV’ s connectors by using DVI converter cables (not supplied), you can refer to the following resolution information.
English - 36 - Appendix E: Software Upgrade • Y our TV is capable of fi nding and updating new software upgrades over broadcast channels. • For broadcast channels search, TV looks the available channels stored in your settings. So before software upgrade search, it is advised to auto search and update all available channels.
English - 37 - Speci fi cations TV BROADCASTING P AL/SECAM B/G D/K K’ I/I’ L/L ’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND NUMBER OF PRESET CHANNELS 1000 CHANNEL INDICA TOR On Screen Display RF AERIAL INPUT 75 Ohm (unbalanced) OPERA TING VOL T AGE 220-240V AC, 50Hz.
English - 38 - Dimensional Drawings A01_MB61_[GB]_1910UK_IDTV_TC_PVR_BRONZE16_32942LED_100Hz_ROCKER_10072539_50185773.indd 38 A01_MB61_[GB]_1910UK_IDTV_TC_PVR_BRONZE16_32942LED_100Hz_ROCKER_10072539_50185773.
English - 39 - End of life disposal A01_MB61_[GB]_1910UK_IDTV_TC_PVR_BRONZE16_32942LED_100Hz_ROCKER_10072539_50185773.indd 39 A01_MB61_[GB]_1910UK_IDTV_TC_PVR_BRONZE16_32942LED_100Hz_ROCKER_10072539_50185773.
English - 40 - Detachable Stand Uninstallation Method T o install the TV on the wall, fi rst of all, foot assembly should be removed. Unscrew the 4 screws that attach the foot assembly to the panel and remove the foot assembly from the panel. A01_MB61_[GB]_1910UK_IDTV_TC_PVR_BRONZE16_32942LED_100Hz_ROCKER_10072539_50185773.
English - 41 - Screw Dimensions L D Model D L Item Number Installation of the Screw LC-19LE510E LC-19LE510K Ø4 30 4 T o the wall M4 18 4 T o the product LC-22LE510E LC-22LE510K LC-22DV510E LC-22DV510.
An important point after buying a device Sharp LC-32LE530E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp LC-32LE530E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp LC-32LE530E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp LC-32LE530E you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp LC-32LE530E will certainly help you make a decision on the purchase.
If you already are a holder of Sharp LC-32LE530E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp LC-32LE530E.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp LC-32LE530E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp LC-32LE530E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
