Instruction/ maintenance manual of the product LC-13E1M LC-15E1M LC-20E1M 1 LC-13E1M LC-15E1M LC-20E1M Sharp
Go to page of 38
ENGLISH LCD COLOUR TELEVISION OPERA TION MANUAL Printed in Japan TINS-A280WJZZ 02P09-JKM Printed on post-consumer recycled paper . LC-13E1M LC-15E1M LC-20E1M.
1 LC-13E1M LC-15E1M LC-20E1M LCD COLOUR TELEVISION OPERA TION MANUAL ENGLISH CONTENTS Page DEA R SHA RP C UST OMER ................................ 2 IMPORTANT SAFETY PRECAUTIONS ......... 2, 3 SUPPLIED ACCESSORIES ................................ 4 PREPARATION .
2 DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp LCD Colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product.
3 ■ Cleaning — Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. ■ Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement.
4 Make sure the following accessories are provided with the product. SUPPLIED ACCESSORIES AC Cord ( × 1) Antenna Cable ( × 1) “ AAA ” size (UM/SUM-4) Dry Battery ( × 2) AC Adapter ( × 1) UBATU0026GEZZ UADP-0212CEZZ Cable Clamp ( × 1) Operation Manual ( × 1) Wireless Remote Control ( × 1) *Product shape varies in some countries.
5 PREP ARA TION Batteries for Remote Control Before using the LCD TV set for the first time, install two ( “ AAA ” size, UM/SUM-4) batteries (supplied). When the batteries become depleted and the remote control fails to operate, replace the batteries with new ( “ AAA ” size, UM/SUM-4) batteries.
6 Power Connection Antenna Connection Note: • Use a commercially available AC plug adapter, if necessary, depending on the design of the wall outlet.
7 CH MENU TV/VIDEO MAIN POWER PRESET 1 2 CH VOL VOL MENU TV/VIDEO PRESET 1 2 MAIN POWER P O W E R SLEEP Upper control panel LC-20E1M LC-13E1M LC-15E1M MENU MAIN POWER TV/VIDEO CH( )/( ) VOL ( - )/(+) LOCA TION OF USERS CONTROL SLEEP indicator The SLEEP indicator lights up red when the SLEEP TIMER is set to on.
8 LOCA TION OF USERS CONTROL (Continued) Main unit (rear view) Y P B C O M P O N E N T P R L L R AV-I N 2/O UT V I D E O A U D I O R A U D I O A V - I N 1 L R A U D I O S - V I D E O A N T . V I D E O P O W E R I N P U T D C 1 3 V H E A D P H O N E AN T.
9 Listening with Headphones LOCA TION OF USERS CONTROL (Continued) ■ Before connecting a connection cord into the rear terminal, remove the back cover.
10 LOCA TION OF USERS CONTROL (Continued) Remote control CH VOL LANGUAGE DIS.MODE DISPLAY BRIGHT SLEEP MENU POWER MPX -/-- TV VIDEO MENU (P.14) SLEEP (P.19) MENU cursor (Right/Left Selection) (P.14) VOL (+)/(–) (P.12) LANGUAGE (P.15) POWER (P.12) TV VIDEO (P.
11 TV VIDEO CH VOL LANGUAGE DIS.MODE DISPLAY BRIGHT SLEEP MENU POWER MPX -/-- TV VIDEO CH MENU TV/VIDEO MAIN POWER VOL PRESET 1 2 BASIC OPERA TION Control section of main unit 1 Press MAIN POWER , located on the upper part of the main unit to ON. 2 The POWER/STANDBY indicator instantaneously changes from red to green and the main unit is turned on.
12 CH VOL LANGUAGE DIS.MODE DISPLAY BRIGHT SLEEP MENU POWER MPX -/-- TV VIDEO MUTE POWER VOL(+)/(–) Sound Volume ON/OFF Standby To mute sound BASIC OPERA TION (Continued) 1 Press VOL (+) to increase sound volume. The segment of indicator increases. 2 Press VOL (–) to decrease sound volume.
13 1 Press the button. 2 If “ 5- ” is indicated and the picture does not change, press the -/-- button to switch over to the 1-digit select mode and press again. BASIC OPERA TION ( Continued) Changing the Channels Changing channels using CHANNEL SELECT on the remote control.
14 CH VOL LANGUAGE DIS.MODE DISPLAY BRIGHT SLEEP MENU POWER MPX -/-- TV VIDEO MENU ] / [ < / > MENU MENU SLEEP TIMER PICTURE FEATURE CH-SETTING SELECT: ENTER: EXIT: SELECTING THE MENU ITEMS • This LCD TV set allows you to adjust the picture and sound, and set the channels and other features using the On-Screen Display .
15 CH VOL LANGUAGE DIS.MODE DISPLAY BRIGHT SLEEP MENU POWER MPX -/-- TV VIDEO LANGUAGE On-Screen Display Language Selection PRESET NORMAL SCREEN ■ MENU on the LCD TV set can also be used to select the language. Upper control panel 1 Press MENU on the upper part of the LCD TV set for more than two seconds to display the PRESET mode screen.
16 Note: • When starting PRESET after setting the SOUND SYSTEM with MENU of the Remote Control, the SOUND SYSTEM for all channels are stored into memory. • Unused channels are automatically skipped. • The Preset mode is only available in the TV mode and cannot be operated in the AV mode.
17 CH VOL LANGUAGE DIS.MODE DISPLAY BRIGHT SLEEP MENU POWER MPX -/-- TV VIDEO MENU VOL(+)/(–) CH ( )/( ) CHANNEL SELECT 1 Press MENU (PRESET- 1 ) on the upper part of the LCD TV set for more than two seconds. The AUTO mode screen appears. 2 Press MENU (PRESET- 1 ) to display the MANUAL mode screen.
18 CH VOL LANGUAGE DIS.MODE DISPLAY BRIGHT SLEEP MENU POWER MPX -/-- TV VIDEO MENU ] / [ < / > CHANNEL SELECT PRESET (Continued) Channel Setting 1 Press MENU to display the MENU screen. 2 Press ] / [ to move the cursor to CH-SETTING. 3 Press < / > to display CH-SETTING screen.
19 ADJUSTMENT Adjusting the SLEEP TIMER Setting To use Direct Key function 1 Press SLEEP to display the SLEEP TIMER screen. 2 Press SLEEP to set the sleep timer (in minutes). • Each time you press SLEEP , the timer changes as follows: --- 30 60 90 120 The setting is turned off when --- is displayed.
20 CH VOL LANGUAGE DIS.MODE DISPLAY BRIGHT SLEEP MENU POWER MPX -/-- TV VIDEO MENU ] / [ < / > ADJUSTMENT (Continued) Adjusting the PICTURE Settings 1 Press MENU to display the MENU screen. 2 Press ] / [ to move the cursor to PICTURE. 3 Press < / > to display the PICTURE menu screen.
21 Selected item Press < . Press > . CONTRAST Decrease contrast Increase contrast TINT Toward purple Toward green COLOUR Lower colour intensity Higher colour intensity BLACK LEVEL Less bright Mo.
22 ADJUSTMENT (Continued) Adjusting the FEATURE Settings ■ The FEATURE items can be set by the user. 1 Press MENU to display the MENU screen. 2 Press ] / [ to move the cursor to FEATURE. 3 Press < / > to display FEATURE screen. 4 Check the factory setting of each item on the FEATURE screen.
23 ■ In BLUE BACK, PICTURE setting displayed in purple cannot be selected. ■ AV2 IN/OUT cannot be selected in AV2 mode. Also, AV2 mode cannot be selected, when selecting AV2 OUT.
24 CH VOL LANGUAGE DIS.MODE DISPLAY BRIGHT SLEEP MENU POWER MPX -/-- TV VIDEO MENU ] / [ < / > CH VOL LANGUAGE DIS.MODE DISPLAY BRIGHT SLEEP MENU POWER MPX -/-- TV VIDEO BRIGHT ADJUSTMENT (Continued) Adjusting the BRIGHTNESS Settings You can set the brightness of the screen.
25 ADJUSTMENT (Continued) Adjusting the DISPLAY MODE Settings You can set the orientation of the picture. Directly setting the DISPLAY MODE 1 Press DIS.MODE to display the DISPLAY MODE screen. 2 Press DIS.MODE to change the setting. Setting the DISPLAY MODE on the MENU screen 1 Press MENU to display the MENU screen.
26 NICAM BROADCASTS SELECTION Enables selection of reception mode when receiving a NICAM signal. T o let you enjoy NICAM broadcasting, this LCD TV receives NICAM system stereo, bilingual, and monaural broadcasts. Stereo TV set is receiving a stereo broadcast.
27 IGR (German stereo system ) BROADCASTS Enables selection of reception mode when receiving an IGR Stereo signal. T o let you enjoy IGR broadcasting, this TV receives IGR system stereo and bilingual broadcasts. Stereo TV set is receiving a stereo broadcast.
28 CONNECTING WITH EXTERNAL DEVICES You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals located on the rear of the TV set. When connecting an external device, turn off the power of the main unit first to prevent any possible damage.
29 CONNECTING WITH EXTERNAL DEVICES (Continued) Connecting a VCR, DVD player or a C a m corder (AV-IN1/AV-IN2/OUT/COMPONENT) Note: : • If your VCR (or other external devices) has an S-Video terminal, S-VIDEO connection is recommended. (Use an S-video cord.
30 CONNECTING WITH EXTERNAL DEVICES (Continued) Outputting video and audio (video output) • AV2 has 2 OUT modes (see page 23). • When using the S-VIDEO input for AV-IN1, no video output will be made to the AV output terminal, but audio output will be made for connection to external audio systems.
31 TROUBLESHOOTING ■ Before calling for repair service, check the following items for possible remedies to the encountered symptoms. TV set Problem Check item Reference Pages There is no picture. There is no picture from AV-IN 1. 6 – 11 11 • Make sure the AC adapter is properly inserted in the power outlet.
32 Antenna Problem Check item • The reception may be weak. • The state of the broadcast may also be bad. • Make sure the antenna is facing the right direction. • Make sure the outside antenna is not disconnected. The picture is not sharp. TROUBLESHOOTING (Continued) The picture moves.
33 SPECIFICA TIONS LCD COLOUR TV COMPARISON ■ As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.
34 DIMENSIONAL DRA WINGS Unit: mm LC-13E1M 5 320 337 180 59 97 59 147 157 129 100 100 33 158 12 ° 150 290 313 257 187 220 276 35 ° AV -IN1 VIDEO S-VIDEO HEAD PHONE ANT.
35 DIMENSIONAL DRA WINGS (Continued) Unit: mm LC-15E1M 5 352 379 198 97 59 59 156 173 131 100 100 35.2 167 12 ° 159 309 347 267 212 237 302 35 ° AV -IN1 VIDEO S-VIDEO HEAD PHONE ANT.
36 DIMENSIONAL DRA WINGS (Continued) Unit: mm LC-20E1M ° ° MAIN POWER VOL PRESET 1 2 PO W ER SLEEP.
LC-13E1M LC-15E1M LC-20E1M TINS-A280WJZZ 02P09-JKM.
An important point after buying a device Sharp LC-13E1M LC-15E1M LC-20E1M 1 LC-13E1M LC-15E1M LC-20E1M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp LC-13E1M LC-15E1M LC-20E1M 1 LC-13E1M LC-15E1M LC-20E1M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp LC-13E1M LC-15E1M LC-20E1M 1 LC-13E1M LC-15E1M LC-20E1M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp LC-13E1M LC-15E1M LC-20E1M 1 LC-13E1M LC-15E1M LC-20E1M you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp LC-13E1M LC-15E1M LC-20E1M 1 LC-13E1M LC-15E1M LC-20E1M will certainly help you make a decision on the purchase.
If you already are a holder of Sharp LC-13E1M LC-15E1M LC-20E1M 1 LC-13E1M LC-15E1M LC-20E1M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp LC-13E1M LC-15E1M LC-20E1M 1 LC-13E1M LC-15E1M LC-20E1M.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp LC-13E1M LC-15E1M LC-20E1M 1 LC-13E1M LC-15E1M LC-20E1M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp LC-13E1M LC-15E1M LC-20E1M 1 LC-13E1M LC-15E1M LC-20E1M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
