Instruction/ maintenance manual of the product LC 46SE94U Sharp
Go to page of 59
SHARP ELECTRONICS CORPORA TION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORA TION LC-46SE94U LC-52SE94U LC-65SE94U OPERA TION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN Printed in Mexic.
Dimensional Drawings Unit: inch (mm) LC-65SE94U 17 21 / 64 (440) 25 19 / 32 (650) 12 13 / 16 ( 325 ) 60 25 / 64 (1534) 56 29 / 64 (1433.5) 31 3 / 4 (806.5) 40 3 / 32 (1018) 37 49 / 64 (959) 35 3 / 4 (908) 22 9 / 32 (566) 31 3 / 16 (792) 16 7 / 64 (409) 5 63 / 64 (152) 2 21 / 64 (59) 3 61 / 64 (100) LC-46_52_65SE94U_E_Hyo_Se8mm.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert.
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expr essly approved by the manufactur er could void the user's authority to operate this equipment.
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This pr oduct has been engineered and manufactur ed with the highest priority on safety . However , impr oper use can result in electric shock and/or fir e.
IMPORTANT SAFETY INSTRUCTIONS 4 • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
Supplied Accessories 5 Make sure the following accessories are provided with the product. • Always use the AC cord supplied with the TV. • AC cord enclosed in this product is for 110-125V. In using it on the 125-240V AC, please consult the following.
6 LC-46SE94U/LC-52SE94U • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. ■ 2 Insert the projections on the speaker unit into the corresponding slots on the TV, then fasten the screws.
Ferrite core POWER POWER indicator 7 Ventilation & Cleaning Tips Keep your AQUOS television in a well ventilated area and make sure not to place it by a heat source or use it near water. The AQUOS television is designed for AC use only and should be used with the supplied AC cord.
30º 30º 30º 30º 17´ (5 m) Remote control sensor 8 QUICK REFERENCE If the remote control fails to operate TV functions, replace the batteries in the remote control unit. CAUTION Improper use of batteries can result in chemical leakage or explosion.
9 IMPORTANT INFORMATION ................................. 1 Trademarks ............................................................. 2 DEAR SHARP CUSTOMER .................................... 3 IMPORTANT SAFETY INSTRUCTIONS ................. 3 Supplied Accessories.
10 Part Names TV (Front) OPC indicator (See page 22.) POWER indicator (See page 15.) OPC sensor (See page 22.) Remote control sensor SLEEP indicator (See page 16.
3 2 11 7 5 6 4 9 20 18 19 21 22 7 8 23 11 10 24 12 14 13 26 27 28 15 16 30 25 29 11 Part Names 1 TV POWER: Switch the TV power on or enters standby. (See page 15.) 2 DISPLAY: Display the channel information. 3 SOURCE POWER: Turns the power of the external equipment on and off.
Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set.
• To enjoy the AQUOS 1080p display capability, connect your external equipment using a component cable and set the equipment to 1080p output. • See page 14 for connecting a Blu-ray disc player, HD-DVD player, DVD player or a Digital TV STB to the HDMI terminal.
HDMI-certifi ed cable (commercially available) HDMI equipment HDMI-certifi ed cable (commercially available) Connecting HDMI Equipment You can use the INPUT 4, INPUT 5 or INPUT 6 terminal when connecting HDMI equipment. Using Digital Audio Output It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal.
15 Language TV Location Air/Cable CH Search English Español Français TV Location Language Air/Cable CH Search Home Store TV Location Air/Cable Language CH Search Analog & Digital Search Start Ca.
16 Direct Button Operation Sleep Timer Allows you to set a time when the TV automatically switches to standby. Press SLEEP . The remaining time displays when the sleep timer has been set. Each time you press SLEEP , the remaining time switches as shown below.
17 AV MODE AV MODE gives you 8 viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment. Press AV MODE .
18 2 Air ANALOG Audio : MONO CC : 1/2 CC1 Ratings : NONE Closed Captions and Digital Closed Captions Depending on the number of caption services in the signal being received, you will see information such as 1/2 or 1/4 displayed. 1/2 means “the fi rst of two services”.
19 Direct Button Operation VIEW MODE You can select the screen size. 1 Press VIEW MODE . The View Mode menu displays. The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or a / b while the View Mode menu is displayed to select a desired item on the menu.
20 Menu Items Some menu items may not be displayed depending on the selected input source. • Picture Menu OPC .................................................. Page 22 Backlight ...........................................Page 22 Contrast ..........
21 ENTER : Select : Enter MENU : Exit RETURN : Back 1 Item displayed in yellow • This indicates the item currently selected. • Press ENTER to go to the adjustment screen for this item. 2 Item in brackets • This indicates the current setting for the item.
22 On-Screen Display Menu When set to "On", the OPC senses the surrounding light and automatically adjusts the backlight brightness. Make sure nothing obstructs the OPC sensor, which could affect its ability to sense surrounding light.
23 I/P Setting Converts input signals depending on the type of images. Fast: Suitable for fast-moving images Slow: Suitable for smooth images with low amounts of fl ickers "I/P Setting" is not selectable when channel display shows an input resolution of 480P, 720P, or 1080P.
24 Setup Menu CH Setup Antenna Setup-DIGIT AL EZ Setup Input Skip Parental CTRL Position Language Reset [English] Setup Example 1 Press MENU to display the MENU screen, and then press c / d to select "Setup". 2 Press a / b to select a specifi c adjustment item, and then press ENTER .
25 CH Setup If initial setup does not memorize all the channels in your region, follow the instructions below to manually memorize the channels. Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable".
26 Position For adjusting a picture's horizontal and vertical position. H-Pos.: Centers the image by moving it to the left or right. V-Pos.: Centers the image by moving it up or down. For resetting adjustments to the factory preset values, press a / b to select "Reset", and then press ENTER .
27 G: General audiences. All ages admitted. PG: Parental guidance suggested. Some material may not be suitable for children. PG-13: Parents strongly cautioned. Some material may be inappropriate for children under 13. R: Restricted. Under 17 requires accompanying parent or adult guardian (age varies in some jurisdictions).
28 Canadian Rating Systems (Canadian English ratings and Canadian French ratings) The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming.
29 Option Menu Audio Only Output Select AQUOS LINK Setup Caption Setup Digital Caption Info. Program Title Display Favorite CH Game Play Time Operation Lock Out Demo Mode [Fixed] [No] [Off] [Off] Option Example 1 Press MENU to display the MENU screen, and then press c / d to select "Option".
30 Caption Setup This function allows you to adjust the closed caption screen appearance to suit your preference. You can adjust 7 items: "Caption Size", "Font Style", "Foreground Color", "Foreground Opacity", "Background Color", "Background Opacity" and "Character Edge".
31 Digital Setup Menu This setting allows you to optimize the settings of Digital broadcasting. Communication Setup Interactive Service Identification Audio Setup Software Update [Y es] [PCM] Digital Setup Example 1 Press MENU to display the MENU screen, and then press c / d to select "Digital Setup".
32 On-Screen Display Menu During the data checking, “ Checking ” blinks. Checking Now checking the data in the USB memory device. • The current version of the TV software and the version of the update fi le on the USB memory device are displayed.
33 Presetting Remote Control Function You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function of your remote control unit.
34 Manufacturer codes REMOTE CONTROL CODE NUMBER Other Viewing Options VCR BRAND REMOTE CONTROL CODE NUMBER DVD/BD/LD BRAND REMOTE CONTROL CODE NUMBER CATV/SAT BRAND • Numbers marked with * are SAT codes, all others are CATV codes. AUDIO BRAND REMOTE CONTROL CODE NUMBER LC-46_52_65SE94U_E.
You can operate AQUOS LINK-compatible devices with the remote control unit when the FUNCTION of the remote control unit is set to TV. REC STOP and OPTION buttons will function only when AQUOS LINK is used. ■ One Touch Play While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source.
Using AQUOS LINK One Touch Recording This function allows easy one-touch recording of the program being viewed on the TV to AQUOS LINK- compatible equipment with a recording function by simply pressing REC on the remote control. Prepare the connected AQUOS LINK-compatible recorder for recording.
Selecting Media Type for CEC-Compatible Recorder You can switch the media (HDD or DVD) for playback or recording on the AQUOS LINK-compatible recorder. 1 Press OPTION to display the AQUOS LINK MENU screen. 2 Press a / b to select “Media change”, and then press ENTER .
Up to four devices can be connected to the HN-VA400U adapter. Internet Model number Number of ports HN-VA401SU 4 + 1 HN-VA400U 4 HN-VA100U 1 (available March 2008) 38 Using the Internet By connecting your TV to a broadband system, you can access the Internet from the TV.
Using the Internet H If you cannot connect to the Internet Perform the procedures below to check your TV's network settings. Ethernet Setup 1 Press EXIT to display the normal TV screen. 2 Press MENU to display the MENU screen, and then press c / d to select “Digital Setup”.
Entering Text (Software Keyboard) When you are editing an input screen or specifying the Ethernet settings used for accessing the Internet, enter text from the software keyboard. You can enter up to 128 characters for text. • Buttons Description a Moves the focus up.
Using the Browser About links Web pages on the Internet often include “links” that allow you to jump to other web pages (or sites). “Links” can take various forms, including words or images, but they always work in the same way letting you jump to the link destination when you select them.
Using the Toolbar You can use the toolbar to control the browser and to specify settings. 1 Press D on the remote control unit to display the toolbar. 2 Press c / d to select a function, and then press ENTER . Selected item Description Displays the linked page in a new tab.
Saving the URL of the Current Page Adding a web page to your bookmarks allows you to return to that page later by simply selecting it from your list of bookmarks. 1 Display the page that you want to bookmark. 2 Press D on the remote control unit to display the toolbar.
Browser Settings You can check or modify your browser settings from the Browser menu. The Browser menu includes a display settings menu and a security settings menu. 1 Press D to display the toolbar. 2 Press c / d to select “ ” in the toolbar, and then press ENTER .
3 Attach the stand hole covers. (Align the tabs of the covers with the holes on the TV, and press until they lock into place.) 45 Removing the Stand • Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal. CAUTION • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Vertical mounting Angular mounting Setting the TV on the Wall CAUTION • This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP) (for LC-46SE94U/ LC-52SE94U) or AN-65AG1 (SHARP) (for LC-65SE94U). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
47 Troubleshooting Possible Solution • Is the volume too low? (See page 16.) • Is “Variable” selected in “Output Select”? (See page 29.) • Have you pressed MUTE on the remote control unit? (See page 16.) Appendix Problem • No power • Unit cannot be operated.
■ PC control of the TV • Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections. • This operation system should be used by a person who is accustomed to using computers.
Item Model: LC-46SE94U Model: LC-52SE94U Model: LC-65SE94U LCD panel 46 o screen size class Advanced Super View & BLACK TFT LCD (Diagonal Measurement: 45 63 / 64 o ) 52 o screen size class Advance.
50 The secret number is • As a precautionary measure, make a note of your secret number above, cut it from this manual, and keep it in a safe place. . CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number using the following procedure.
51 Information on the Software License for This Product Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.
52 For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
53 LC-46_52_65SE94U_E.indb 53 LC-46_52_65SE94U_E.indb 53 2007/12/21 18:55:28 2007/12/21 18:55:28.
NOTE LC-46_52_65SE94U_E.indb 54 LC-46_52_65SE94U_E.indb 54 2007/12/21 18:55:28 2007/12/21 18:55:28.
ES 54 Dimensional Drawings Unit: inch (mm) LC-46SE94U 43 43 / 64 (1109) 13 1 / 2 (343) 3 1 / 2 (89) 5 3 / 64 (128) 40 19 / 64 (1023.4) 28 5 / 16 (719) 26 17 / 64 (667) 30 25 / 64 (772) 2 3 / 32 (53) 17 3 / 8 (441) 15 3 / 4 (400) 15 3 / 4 (400) 6 57 / 64 (175) 22 43 / 64 (575.
Dimensional Drawings Unit: inch (mm) LC-65SE94U 17 21 / 64 (440) 25 19 / 32 (650) 12 13 / 16 ( 325 ) 60 25 / 64 (1534) 56 29 / 64 (1433.5) 31 3 / 4 (806.5) 40 3 / 32 (1018) 37 49 / 64 (959) 35 3 / 4 (908) 22 9 / 32 (566) 31 3 / 16 (792) 16 7 / 64 (409) 5 63 / 64 (152) 2 21 / 64 (59) 3 61 / 64 (100) LC-46_52_65SE94U_E_Hyo_Se8mm.
SHARP ELECTRONICS CORPORA TION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORA TION LC-46SE94U LC-52SE94U LC-65SE94U OPERA TION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN Printed in Mexic.
An important point after buying a device Sharp LC 46SE94U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp LC 46SE94U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp LC 46SE94U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp LC 46SE94U you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp LC 46SE94U will certainly help you make a decision on the purchase.
If you already are a holder of Sharp LC 46SE94U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp LC 46SE94U.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp LC 46SE94U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp LC 46SE94U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
