Instruction/ maintenance manual of the product IG-BC2J Sharp
Go to page of 19
ENGLISH Plasmacluster Ion Generator OPERA TION MANUAL IG-BC2J Device of this mark is a trademark of Sharp Corporation. Plasmacluster is a registered trademark or a trademark of Sharp Corporation. Read and keep this manual carefully . • The unit is designed for ordinary passenger cars with DC 12V batteries.
.
ENGLISH ENGLISH Thank you for purchasing this SHARP Plasmacluster Ion Generator . Please read this manual carefully before using Plasmacluster Ion Generator . After reading, keep the manual in a convenient location for future reference. E-1 CONTENTS IMPORT ANT SAFETY INSTRUCTIONS .
E-2 IMPORT ANT SAFETY INSTRUCTIONS Please read instructions carefully before using this unit as below . W ARNINGS - T o reduce the risk of electric shock, fi re or injury : When using electrical appliances, basic safety precautions should be followed, including the following: • Do not operate switches while driving.
ENGLISH E-3 CAUTIONS CONCERNING OPERA TION: • Do not touch the metal parts of the car adapter ’s cigar plug (or of the cigar lighter socket). (The metal parts of the cigar plug could be hot directly after the car is stopped, and could cause burns if touched.
FILTER CLEAN UNIT RESET (Press 3sec.) MODE E-4 MAIN UNIT • CONTROL P ANEL/DISPLA Y BACK P ARTS NAME Air Outlet Main Unit Reset Button Filter Clean Light (Orange) Mode Light (Blue) Mode Button (See E.
ENGLISH E-5 Connecting the car adapter and installing the unit INST ALLA TION GUIDANCE Remove the fi lter cover . 1 Filter cover Remove Insert the car adapter's unit connection plug securely into the unit power input terminal.
E-6 Insert the cigar plug into the cigar lighter socket. 4 • Be sure to remove any dirt from the cigar lighter socket. Failure to do so could cause faulty contact. • When using, connect with the selector switch set to “N”, and if the plug is loose, connect with the switch set to “W”.
ENGLISH MODE MODE MODE MODE E-7 OPERA TION LOW HIGH 'OFF' Release high-density Plasmacluster ions quietly . Release high-density Plasmacluster ions at high fan speed.
E-8 CLEANING AND MAINTENANCE FIL TER Every week or more often if necessary The fi lter must be cleaned regularly in order to maintain the ion density . Filter soiling depends on the usage environment, so clean the fi lter about once a week or whenever the fi lter is clogged, even if the Filter Clean Light has not turned on.
ENGLISH MAIN UNIT Every month or more often if necessary <For Stubborn Dirt> Use water and a mild detergent. And then, wipe with a wet cloth. Make sure to dry out the main unit. Wipe with a dry soft cloth. t> E-9 Remove the dust from the electrode section of the unit with a cotton swab.
E-10 PLASMACLUSTER ION GENERA TING UNIT REPLACEMEN T In order to release Plasmacluster Ion stably , periodical replacement of Plasmacluster Ion Generating Unit is necessary .
ENGLISH E-1 1 REPLACING THE FUSE SPECIFICA TIONS *1 Space corresponding to a cabin measuring 1.5 (width) x 2.4 (depth) x 1.0 (height) meters * 2 Approximate number of ions as measured from a point near the center of a space of the applicable volume (0.
TROUBLESHOOTING Problem WHA T TO DO The Plasmacluster Ion Generator does not work. • Is a Car Adapter connected properly? Please be connected de fi nitely . • Does not a fuse blow? Replace with a new fuse. (See E-1 1) Flashing faster (red) Flashing (blue) It is over the exchange period of Plasmacluster Ion Generating Unit .
ENGLISH E-13 A. Information on Disposal for Users (private househo lds) 1. In the European Union Attention: If you want to dispose o f this equipment, please do not use the ordinary dust bin! Used ele.
Cong ratula tions on Your Purcha se! This Sharp product is warranted against faults in material and manufacture for the period as stated in the table below. If service is required during the warranty period, please contact your nearest Sharp Approved Service Centre.
FOR LOCATION ENQUIRIES WITHIN NEW ZEALAND REGARDING YOUR LOCAL SHARP CORPORATION OF NEW ZEALAND LIMITED VISIT OUR WEBSITE AT SHARP CUSTOMER SERVICES TELEPHONE: 09 573 0111 FACSIMILE: 09 573 0113 FOR LOCATION ENQUIRIES WITHIN AUSTRALIA REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.
ENGLISH MEMO.
Printed in Thailand TINS-A452KKRZ 10J- 1 TH SHARP CORPORA TION OF AUSTRALIA PTY .L TD. A. B. N. 40 003 039 405 1 HUNTINGWOOD DRIVE, HUNTINGWOOD, N.S.W. 2148 P.O.BOX 6827, BLACKTOWN. N.S.W. 2148 www.sharp.net.au SHARP CORPORA TION OF NEW ZEALAND LIMITED 59 HUGO JOHNSTON DRIVE, PENROSE, AUCKLAND www.
An important point after buying a device Sharp IG-BC2J (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp IG-BC2J yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp IG-BC2J - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp IG-BC2J you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp IG-BC2J will certainly help you make a decision on the purchase.
If you already are a holder of Sharp IG-BC2J, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp IG-BC2J.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp IG-BC2J. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp IG-BC2J along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
