Instruction/ maintenance manual of the product HT-SB32D Sharp
Go to page of 21
MODEL HT -SB32D SOUND BAR HOME THEA TRE SYSTEM OPERA TION MANUAL 14K R AS 1 Note: This product is recommended for at panel TV (LED, LCD and plasma). TINSEA482A WZZ The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
2 Accessories The following accessories are included. MUTE O N/ STA ND - B Y MU SIC CI NEM A NE WS SUR ROU ND BYPA SS INPU T TV CH VOL VOL RRMCG A 322A W S A SOU ND M ODE Remote control x 1 AC/DC adap.
3 ■ General ● Keep your equipment at least 10 cm of free space along the sides, top and back for proper ventilation. 10 cm SOUND BAR HOME THEATRE SYSTEM HT-SB32D 10 cm 10 cm ● Use the unit on a firm, level surface free fr om vibration.
4 1. Left Channel Speakers 2. Right Channel Speakers 3. On/Standby/Input Indicator 4. On/Standby Button 5. Input Button 6. Pairing Button 7. Pairing Indicator 8. Surr ound Indicator 9. Surr ound Button 10. V olume Down Button 11. V olume Up Button 12.
5 TV Operation Buttons (Only SHARP TV): On/Standby Button CH VO L Sets the TV power to “ON” or “ST ANDBY”. Input Select Button (TV) CH VO L Press the button to switch the input source. V olume Up and Down Buttons CH VO L T urn up/down the TV volume.
6 Make sure to unplug the AC power lead before in- stalling the sound bar or changing the position. Using spike legs 1 Peel the double sided tape separator . 2 Fix the spike leg onto the sound bar as shown. T o mount the sound bar on the wall Caution: ● Be very careful to prevent the sound bar [2.
7 Installation image: SOUND BAR HOME THEATRE SYSTEM HT-SB32D Place the sound bar as shown. Notes: ● Remove the pr otective film covering the sound bar before turning on the system. ● The fr ont panel of the sound bar is not removable. Caution: ● Do not change the installation direction when the sound bar is turned on.
8 Rack/ table Screw eye (not supplied) Safety wires (not supplied) Screw eye (not supplied) Sound bar SOUND BAR HOME THEA TRE SYSTEM HT -SB32D Safety wires (not supplied) Sound bar Screw eye (not supp.
9 Caution: T urn off all other equipment before making any connections. Notes: ● T o connect to TV/player , use AUDIO IN or OPTICAL IN terminals located at the rear of the sound bar . ● Refer the operation manual of the equipment to be connected. ● Fully insert the plugs to avoid fuzzy pictur es or noises.
10 After checking all the connections have been made correctly , connect the AC power lead to the AC power input socket, then to the wall socket. ■ Using with the AC/DC adaptor 1 Plug the AC power lead into the AC/DC adaptor . 2 Plug the AC/DC adaptor cable into the DC INPUT socket on the sound bar .
11 ■ Battery installation 1 While pushing the locking tab to- wards the center of the r emote con- trol, slide out the battery holder . Locking tab Back of remote contr ol 2 Remove the old battery from the battery holder , insert the new bat- tery and then slide the battery hold- er back into the remote contr ol.
12 ■ T o turn the power on Press the ON/ST ANDBY button. The On/Standby/Input Indicator lights up according to input sour ce: Input source On/Standby/Input Indicator OPTICAL IN T urns green AUDIO IN T urns cyan Bluetooth T urns blue Note: If the power does not turn on, check whether the power lead is plugged in properly .
13 ■ Audio format During the OPTICAL IN function the AUDIO FORMA T indicator will light up to indicate the audio format. Audio format Audio format indicator Dolby Digital One of the digital audio systems for theatrical use. Y ou can also enjoy the stereophonic ef fect in the home theatre system.
14 SOUND BAR HOME THEATRE SYSTEM HT-SB32D SOUND BAR HOME THEATRE SYSTEM HT-SB32D HT-SB32D NFC detection area M a n u a l B l u e t o o t h s e t t i n g Switch ‘ON’ Bluetooth Search/ scan A Bluetooth audio source device (smartphone/ tablet).
15 1 Peel the separator of f the velcro tape (loop type) and stick it on a desired surface. Separator V elcro tape (loop type) 2 Peel the separator of f the velcro tape (hook type) and stick it to the rear of the NFC tag. Then place the tag onto the desired location.
16 Bluetooth wireless technology is a short-range radio technology that enables wireless communication between various types of digital devices, such as mobile phone or computer . It operates within a range of about 10 metres (30 feet) without the hassle of having to use cables to connect these devices.
17 Listening to Bluetooth enabled devices (continued) Notes: ● If a device such as microwave oven, wir eless LAN card, Bluetooth device or any other device that uses the same 2.4 GHz frequency is placed near the system some sound interruption may be heard.
18 Many potential problems can be r esolved by the owner without calling a service technician. If something is wrong with this pr oduct, check the following before calling your authorised SHARP dealer or service center . ■ General Symptom Possible cause No sound is heard.
19 T roubleshooting chart ■ Condensation Sudden temperature changes, storage or operation in an extremely humid envir onment may cause condensation inside the cabinet or on the transmitter on the remote contr ol. Condensation can cause the sound bar to malfunc - tion.
20 FOR LOCATION ENQUIRIES WITHIN NEW ZEALAND REGARDING YOUR LOCAL SHARP CORPORATION OF NEW ZEALAND LIMITED VISIT OUR WEBSITE AT SHARP CUSTOMER SERVICES TELEPHONE: 09 573 0111 FACSIMILE: 09 573 0113 FOR LOCATION ENQUIRIES WITHIN AUSTRALIA REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.
21 FOR LOCATION ENQUIRIES WITHIN NEW ZEALAND REGARDING YOUR LOCAL SHARP CORPORATION OF NEW ZEALAND LIMITED VISIT OUR WEBSITE AT SHARP CUSTOMER SERVICES TELEPHONE: 09 573 0111 FACSIMILE: 09 573 0113 FOR LOCATION ENQUIRIES WITHIN AUSTRALIA REGARDING YOUR LOCAL SHARP APPROVED SERVICE CENTRE VISIT OUR WEBSITE AT www.
An important point after buying a device Sharp HT-SB32D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp HT-SB32D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp HT-SB32D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp HT-SB32D you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp HT-SB32D will certainly help you make a decision on the purchase.
If you already are a holder of Sharp HT-SB32D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp HT-SB32D.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp HT-SB32D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp HT-SB32D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
