Instruction/ maintenance manual of the product HT-SB200 Sharp
Go to page of 20
SOUND BAR SYSTEM MODEL HT-SB200 OPERATION MANUAL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Note: This product is recommended for flat panel TV (LCD and plasma).
2 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm Important Instruction Special no tes W ARNINGS ● When the ON/ST AND-BY button is set at ST AND-BY position, main voltage is still present inside the speak er. When the ON/ST AND-BY button is set at ST AND-BY position, the speaker ma y be brought into operation by the remote control.
3 HT -SB200 2009 January 23 HT -SB200_A6_EN.fm General Information Accessories Please confirm that only the following accessories are included. Note: The AC/DC adaptor ma y be different from the one in the drawing. Contents Page ■ General Information Precautions .
4 HT -SB200 2008 December 22 HT -SB200_A6_EN.fm General Information Precautions ■ General ● Please ensure that the equipment is positioned in a well- ventilated area and ensure that there is at least 10 cm (4") of free space along the sides and top of the equipment.
5 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm General Information Controls and indicator s ■ Front P anel Reference page 1. Sport Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2. Standard Indicator. . . . . . . . . . . . .
6 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm General Information Controls and indicator s (continued) ■ Rear Panel Reference page 1. Audio Line In 2 (3.5 mm stereo/headphone) Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm General Information Note: Before using remote control, please remo ve plastic shield at battery holder. ■ Remote Control Reference page 1. Remote Control T ransmitter . . . . . . . . . . . . . . . . . .
8 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm Preparation for Use Speaker preparation Select from three installation methods according to the preferred position. Notes: ● Option 1 or option 2 indicates spike positions based on LCD TV stand. ● When attaching the spikes, place the speak er on a cushion or soft cloth to av oid damage.
9 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm Preparation for Use Caution: ● Be very careful to prev ent the speaker [1.75 kg (3.86 lbs.)] from falling when mounting on the w all. ● Before mounting, chec k the wall strength. (Do not put on the veneer plaster or white washed wall.
10 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm Preparation for Use Speaker preparation (continued) Note: Make sure all screws are fully tighten. (screws are not supplied) ■ Installing the speaker 4 Screw the wall mount angle to the wall as shown in the illustration.
11 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm Preparation for Use Placing the speaker Installation image: Place the speaker as shown. Notes: ● As the sound from the speaker is omni-directional, you can place the speaker anywhere y ou like. Howe ver, it is recommended to place it as close to the TV as possible.
12 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm Preparation for Use Speaker connections to TVs Caution: T ur n off all other equipment bef ore making any connections. T uner receiving for other audio system ● Placing the aerial near the speaker AC po wer lead may cause noise pick up .
13 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm Preparation for Use A C power connection After checking all the connections hav e been made correctly , connect the AC po wer lead to the AC power input soc ket, then to the wall sock et.
14 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm Preparation for Use Remote control (contin ued) Caution: ● Do not use rechargeable battery (nick el-cadmium batter y , etc.). ● Danger of explosion if battery is incorrectly replaced. ● Replace only with the same or equivalent type.
15 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm Basic Operation Remote control operation: Press the VOL + button to increase the v olume and the V OL – button to decrease the v olume. ■ Preset sound mode Main unit operation: When the SURROUND button is pressed, the current mode setting will light up.
16 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm References T roub leshooting char t Many potential problems can be resolv ed by the owner without calling a service technician. If something is wrong with this product, check the f ollowing before calling y our author ised SHARP dealer or service centre.
17 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm References Maintenance ■ Cleaning the cabinet P er iodically wipe the cabinet with a soft cloth. Caution: ● Do not use chemicals for cleaning (petrol, paint thinner , etc.). It may damage the cabinet finish.
18 HT -SB200 2008 December 16 HT -SB200_A6_EN.fm References Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production speaker .
MEMO.
TINSEA282AWZZ 09A R AS 2 TINSEA290AWZZ.
An important point after buying a device Sharp HT-SB200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sharp HT-SB200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sharp HT-SB200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sharp HT-SB200 you will learn all the available features of the product, as well as information on its operation. The information that you get Sharp HT-SB200 will certainly help you make a decision on the purchase.
If you already are a holder of Sharp HT-SB200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sharp HT-SB200.
However, one of the most important roles played by the user manual is to help in solving problems with Sharp HT-SB200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sharp HT-SB200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
