Instruction/ maintenance manual of the product AD615 Sensormatic
Go to page of 43
Installation and Service Guide 8000-2616-01, Rev. D (42 pages ) DeltaDome Programm able Surveillance Cam era 1 1 DeltaDome ™ Programmable Surveillance Camera AD615 and AD616 Series with On-Screen Menu Progr amming Figure 1. DeltaDom e camera DeltaDome, Sensormatic a nd the Sensormatic logo are tradem arks of Sensorm atic Electronic s Corporation.
2 INSTALLA T ION AND SERVICE GUIDE DeltaDome P rogramm abl e Surveillance Camer a 8000-2616-01, REV. D About the Camera Dome The DeltaDom e ™ progr am m able surveillance cam era (Figur e 1) m ounts indoors or outdoors , and can com m unicate with the video contro ller over a SensorNet 485, RS422, or Manchester network.
SpeedDom e Ultra III and IV Camera Dom es 8000-2573-18, Rev. D INSTALLA T ION AND SERVICE GUIDE 38 Housing and Eyeball Assembly The hous ing and ey eball as sem bly consists of the f ollowing: · Housing. The housing contains the dom e’s power supply, pan motor, and electronic s used to operate the eyeball.
42 INSTALLA T ION AND SERVICE GUIDE DeltaDome P rogramm abl e Surveillance Camer a 8000-2616-01, REV. D Figure 2. Mounting base and housing and eyeball assembly ADPTB Mounting Bas e ADIOB Mounting Bas.
DeltaDome P rogramm abl e Surveillance Camera 8000-2616-01, Rev. D INSTALLA T ION AND SERVICE GUIDE 41 Indoor C eiling/ Wall Moun ting (Op tional) The c amer a dom e attaches to one of the following optional indoor m ounting struc tures ( Figure 5).
42 INSTALLA T ION AND SERVICE GUIDE DeltaDome P rogramm abl e Surveillance Camer a 8000-2616-01, REV. D Figure 5. Indoor mounting structures (optional) RHIUFB RHIUAB RH IUH C RHIU2X2 RHIUTH RHIUTR RUC.
DeltaDome P rogramm abl e Surveillance Camera 8000-2616-01, Rev. D INSTALLA T ION AND SERVICE GUIDE 41 Outdoor Mounting (Optional ) Note: This docum ent does not include outdoor installation and ser vice instruc tions. For these instruc tions, see Installing the ADO DH Outdoor Housing , 8000-2616-04.
42 INSTALLA T ION AND SERVICE GUIDE DeltaDome P rogramm abl e Surveillance Camer a 8000-2616-01, REV. D Figure 8. Outdoor mounting structures (optional) RHORM over roof mount RHOCM ceiling mount RHOPM.
DeltaDome P rogramm abl e Surveillance Camera 8000-2616-01, Rev. D INSTALLA T ION AND SERVICE GUIDE 41 Data Cable Requirements Table 2 s hows the data cable requirem ents for SensorNet, RS422, and Manches ter networks .
42 INSTALLA T ION AND SERVICE GUIDE DeltaDome P rogramm abl e Surveillance Camer a 8000-2616-01, REV. D Power-Up Routine After power is c onnected to the dom e, the dom e perfor m s the following hom ing routine. 1. After a f ew seconds, the c am era lens tilts up into the housing and eyeball assembly.
DeltaDome P rogramm abl e Surveillance Camera 8000-2616-01, Rev. D INSTALLA T ION AND SERVICE GUIDE 41 Warnings and Cautions Please review the following warnings and c autions before you begin installation or servic e. WARNINGS ! WARNING! ALW AYS USE: · Proper safety equipment for the location and type of installation.
42 INSTALLA T ION AND SERVICE GUIDE DeltaDome P rogramm abl e Surveillance Camer a 8000-2616-01, REV. D CAUTIONS For indoor domes , the m axim um length of power cable allowed between the Class 2 LPS (low voltage) ac sourc e, such as a J-box, and the dome is 250m (820').
DeltaDome P rogramm abl e Surveillance Camera 8000-2616-01, Rev. D INSTALLA T ION AND SERVICE GUIDE 41 Indoor Installation This section ex plains how to connect the housing and ey eball as sem bly to a: · ADPTB m ounting bas e · ADIOB m ounting base.
42 INSTALLA T ION AND SERVICE GUIDE DeltaDome P rogramm abl e Surveillance Camer a 8000-2616-01, REV. D Connecting to ADPTB Mounting B ase This procedure ex plains how to connect the housing and eyeball assembly to an ADPTB base.
DeltaDome P rogramm abl e Surveillance Camera 8000-2616-01, Rev. D INSTALLA T ION AND SERVICE GUIDE 41 3. W ITH PO W ER OFF, c onnect video cable (Figure 12). a. Connect BNC of video m icr o coax c able to BNC of video cable. b. Feed cable through ac cess hole in base.
42 INSTALLA T ION AND SERVICE GUIDE DeltaDome P rogramm abl e Surveillance Camer a 8000-2616-01, REV. D 6. Connect 4-pin plug (alar m input/output) to 4-pin receptacle ( Figure 13). a. Feed cable through ac cess hole in base. b. Connect alarm wires to 4-pin plug ( refer to chart below).
DeltaDome P rogramm abl e Surveillance Camera 8000-2616-01, Rev. D INSTALLA T ION AND SERVICE GUIDE 41 7. Connect housing and eyeball assem bly to base (Figure 14). a. Align dimple on c ap of dom e with rib on mounting bas e. b. Mate housing and eyeball assembly to base and turn it clock wise until you hear a click .
42 INSTALLA T ION AND SERVICE GUIDE DeltaDome P rogramm abl e Surveillance Camer a 8000-2616-01, REV. D Connecting to ADIOB Mounting B ase This procedure ex plains how to connect the housing and eyeball assembly to an ADIOB mounting bas e.
DeltaDome P rogramm abl e Surveillance Camera 8000-2616-01, Rev. D INSTALLA T ION AND SERVICE GUIDE 41 4. Connect alarm output cable, if used, to P3 connector. Pin Color Designation 1 — 12Vdc (100mA max.) 2 — 12Vdc (100mA max.) 3 — Output P0 (40mA sync.
42 INSTALLA T ION AND SERVICE GUIDE DeltaDome P rogramm abl e Surveillance Camer a 8000-2616-01, REV. D 11. Set dom e addr ess (F igure 17). Rec essed at top of housing and eyeball assem bly are three rotary address switches. Address r ange is fr om 001 to 255, except f or Manchester, which is 01 to 64.
DeltaDome P rogramm abl e Surveillance Camera 8000-2616-01, Rev. D INSTALLA T ION AND SERVICE GUIDE 41 Using the Install/Remova l Tool CA UTION: Do not use this tool to connec t the dome the ADPT B base.
42 INSTALLA T ION AND SERVICE GUIDE DeltaDome P rogramm abl e Surveillance Camer a 8000-2616-01, REV. D Figure 19. How to use th e install/remov al tool Dome Connection (Rever se steps to disconnect) Skirt or Bubbl e A ttachment/Detachment C E D C B B A Detachment Turn until y ou feel a click.
DeltaDome P rogramm abl e Surveillance Camera 8000-2616-01, Rev. D INSTALLA T ION AND SERVICE GUIDE 41 Troubleshooting Indoor Domes CA UTION: This troubleshooting s ection is f or indoor cam era dom es only! T o troubles hoot outdoor dom es, see ins tallation and servic e manual s hipped with the outdoor housing.
42 INSTALLA T ION AND SERVICE GUIDE DeltaDome P rogramm abl e Surveillance Camer a 8000-2616-01, REV. D Routine Troubleshooting Use this proc edure if: · Dome does not respond to c omm ands · Dome does not produce video · Quality of the video is poor · Dome has no lens contr ol.
DeltaDome P rogramm abl e Surveillance Camera 8000-2616-01, Rev. D INSTALLA T ION AND SERVICE GUIDE 41 4. Isolate problem to housing and eyeball assem bly or base by attaching dom e to another base with I/O board. Does dom e display video or respond to c omm ands ? YES Problem is lik ely c able connections or I/O board if us ed.
42 INSTALLA T ION AND SERVICE GUIDE DeltaDome P rogramm abl e Surveillance Camer a 8000-2616-01, REV. D P1 connector (Manchester data) Pin Color Designation 1–4 — Not used.
DeltaDome P rogramm abl e Surveillance Camera 8000-2616-01, Rev. D INSTALLA T ION AND SERVICE GUIDE 41 Detailed Troubles hooting Use this proc edure to determ ine if the problem is a sim ple cable connec tion or a m ajor c om ponent. To perf orm this pr ocedure, you must open the housing and eyeball assembly.
42 INSTALLA T ION AND SERVICE GUIDE DeltaDome P rogramm abl e Surveillance Camer a 8000-2616-01, REV. D Disassemblin g the Dome This section ex plains how to rem ove the following parts f rom the cam era dom e.
DeltaDome P rogramm abl e Surveillance Camera 8000-2616-01, Rev. D INSTALLA T ION AND SERVICE GUIDE 41 Removing the P/S Board Referring to F igure 23. 1.
42 INSTALLA T ION AND SERVICE GUIDE DeltaDome P rogramm abl e Surveillance Camer a 8000-2616-01, REV. D Removing the Slot Covers 1. Gently swivel ey eball to totally expos e one of two slot covers (F igure 25). CA UTION: Swiveling fast c an damage gear s.
DeltaDome P rogramm abl e Surveillance Camera 8000-2616-01, Rev. D INSTALLA T ION AND SERVICE GUIDE 41 Detaching the Eyeball 1. Perfor m procedure “ Rem oving the Slot Covers” (page 29). 2. Perfor m pr ocedure “ Rem oving the Cam era” (this page).
42 INSTALLA T ION AND SERVICE GUIDE DeltaDome P rogramm abl e Surveillance Camer a 8000-2616-01, REV. D The f ollowing steps ref er to Figure 32. 6. Access cam era/lens board. T o do this, loos en captive retaining s crew holding bearing assem bly in place and rem ove this ass em bly .
DeltaDome P rogramm abl e Surveillance Camera 8000-2616-01, Rev. D INSTALLA T ION AND SERVICE GUIDE 41 6. Acce ss tilt moto r. T o do this, loos en captive retaining s crew holding tilt cable ass em bly in plac e and gently remove this assem bly. 7. Remove tilt m otor (Figure 35) .
42 INSTALLA T ION AND SERVICE GUIDE DeltaDome P rogramm abl e Surveillance Camer a 8000-2616-01, REV. D Updating/Reprogramming Dome Software To update or r eprogram dom e sof tware: 1. Remove f lash m em ory chip. Ins ert chip extr actor tool into s quare acces s hole and squeeze to extract f lash m em ory chip (Figure 36).
DeltaDome P rogramm abl e Surveillance Camera 8000-2616-01, Rev. D INSTALLA T ION AND SERVICE GUIDE 41 Ordering Parts This section helps y ou to identif y parts that mak e up the base and housing and eyeball assem bly. Parts in T able 3 are shown in Figure 37.
42 INSTALLA T ION AND SERVICE GUIDE DeltaDome P rogramm abl e Surveillance Camer a 8000-2616-01, REV. D Figure 37. Base, housing, and eyeball assembly Housing Assembly (0400-0925-01/-02) Housing and Ey eball Assy . (0100-2283-00) ADPTB Base Assembly 1 -11 Color NTSC camera -12 Color PAL camera -13 BW E IA camera -14 BW CCI R camera Ey eball Assy .
DeltaDome P rogramm abl e Surveillance Camera 8000-2616-01, Rev. D INSTALLA T ION AND SERVICE GUIDE 41 Specification s—Indoor Dome Operational Pan/Tilt: Manual Pan/T ilt Speed ........ 1°–100° per second (scaled to zoom position) Preset Pan/Tilt Speed .
42 INSTALLA T ION AND SERVICE GUIDE DeltaDome P rogramm abl e Surveillance Camer a 8000-2616-01, REV. D Environ mental Operating Temperature .......... –10° to 50°C (14° to 122°F) Relative Humidity .................... 0 to 95% non-condensing Mechanical Height .
DeltaDome P rogramm abl e Surveillance Camera 8000-2616-01, Rev. D INSTALLA T ION AND SERVICE GUIDE 41 Specification s—12X Camera Monochrome/Color Type ........................................ Interline transfer 1/4" CCD a rray Scanning System .
42 INSTALLA T ION AND SERVICE GUIDE DeltaDome P rogramm abl e Surveillance Camer a 8000-2616-01, REV. D Specification s—16X Camera Color and B&W Cameras Type ........................................ Interline transfer 1/4" CCD a rray Scanning System .
DeltaDome P rogramm abl e Surveillance Camera 8000-2616-01, Rev. D INSTALLA T ION AND SERVICE GUIDE 41 Declarations Regulatory Compliance Emis sions: ......................... 47 CFR, Part 15, Class A ICES-003 EN55022 Class B Imm unity: ..............
42 INSTALLA T ION AND SERVICE GUIDE DeltaDome P rogramm abl e Surveillance Camer a 8000-2616-01, REV. D.
DeltaDome P rogramm abl e Surveillance Camera 8000-2616-01, Rev. D INSTALLA T ION AND SERVICE GUIDE 41 Sensormatic Ele ctr onics Corporation One Blue Hill Plaza Pearl River, NY 10965.
An important point after buying a device Sensormatic AD615 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sensormatic AD615 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sensormatic AD615 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sensormatic AD615 you will learn all the available features of the product, as well as information on its operation. The information that you get Sensormatic AD615 will certainly help you make a decision on the purchase.
If you already are a holder of Sensormatic AD615, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sensormatic AD615.
However, one of the most important roles played by the user manual is to help in solving problems with Sensormatic AD615. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sensormatic AD615 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
