Instruction/ maintenance manual of the product 168 Sensormatic
Go to page of 16
MegaPower 168 Supplement for Recorder Control and Macro Programming.
Copyright 2002, Sensormatic® Electronics Corporation.
MegaPower 168 Matrix Switcher / Controller System Supplement for Recorder Control and Macro Programming Copyright 2002 All rights reserved No part of this manual may be reproduced in any form without .
.
Table of Contents INTRODUCTION ............................................................................................................................................................ 1 System Keyboards ............................................
ii MegaPower 168 Supplement for Recorder Control and Macro Programming.
Introduction MegaPower 168 is a matrix switcher/controller system with a broad range of functionality. Sy stem features for release 3.30 include: ● Video recorder control through keyboard ● Macro .
The VCR number appears in t he MONITOR/VCR display . 3. Select a VCR function by pressing the appropriate key. VCR FUNCTION KEY LABEL STOP OFF RECORD ON PAUSE CLOSE PLAY OPEN REWIND NEAR FAST FORWARD FAR EJECT ACK To return to the monitor m ode of ope ration, press the MON key.
Example 4: [5], [ALT] = [6], [CAM], [10] , [PRESET], [ALT]. Once programm ed, selecting “5, ALT” calls Cam era 6 with Pres et 10 to the selected monito r.
5. The number in the ENTER display indicat es the percentage of macros successfully tran sferred to the keyboard. The number starts at 0 and i ncreases in increments of 10, up to 100 percent . With the keyboard set to 9600 baud and connected directly to the CP U, the transfer will take up to three minut es.
Press the EXIT key to return to the p revious menu. Ports The Ports menu configures the baud rate, data bits, parity, stop bits, and port use for each of the MegaPower 168 system’s ei ght RS-232 ports. Note: Once selections for a port have been m ade, do not ch ange the settings unless t he corresponding RS-232 device is also changed.
Port Use defines the device type connected t o the port. • Al ar m is used for input of alarm signals to the MegaPower 168 CPU. • Keyboard enables keyboard control inputs to the port. For this use, set data bits to “8”, parit y to “none”, and stop bits to “1”.
Appendix A: Keyboard Features Comparison Several keyboards can be used with the Me gaPower 168 syst em for release 3.30. Depending on the keyboard(s) instal led with the system, different features ar e available to the user. The table below provides a comparison of the different keyboard features.
8 MegaPower 168 Supplement for Recorder Cont rol and Macro Programming.
Copyright 2002 Sensormatic Electronics Corporation All Rights Reserved No part of this manual may be reproduced in any form without w ritten permission from Sensormatic Electronics.
SENSORMATIC VIDEO SYSTEMS DIVISION 1 Blue Hill Plaza Pearl River, New York, 10965 PN: 8200-0169-01, Revision A.
An important point after buying a device Sensormatic 168 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sensormatic 168 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sensormatic 168 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sensormatic 168 you will learn all the available features of the product, as well as information on its operation. The information that you get Sensormatic 168 will certainly help you make a decision on the purchase.
If you already are a holder of Sensormatic 168, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sensormatic 168.
However, one of the most important roles played by the user manual is to help in solving problems with Sensormatic 168. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sensormatic 168 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
