Instruction/ maintenance manual of the product TC9820PHI Avery
Go to page of 4
TC9820PHI Rev. AB 11/07 ©2001 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp. All rights reserved. REPLACING THE PRINTHEAD The printhead is sensitive to static electricity, which can damage the printhead or reduce its life. Ground yourself by touching some metal, such as the printer's metal base, before touching the printhead.
2 4. Press forward and down on the two latches on top of the printhead assembly as shown. The printhead will drop out. 5. Lift the printhead assembly using the printhead tab and push back until the printhead assembly clicks into place.
3 6. Carefully unplug the cable from the printhead as shown. The printhead is sensitive to static electricity, which can damage the printhead or reduce its life. Ground yourself by touching some metal, such as the printer's metal base, before touching the printhead.
4 9. Snap the printhead into place. Note: Make sure the printhead cable does not touch the ribbon roll. 10. Clean the new printhead with a cotton swab dipped in isopropyl alcohol to remove any salt or oil left from handling. 11. Let the printhead dry and reload your supplies.
An important point after buying a device Avery TC9820PHI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Avery TC9820PHI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Avery TC9820PHI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Avery TC9820PHI you will learn all the available features of the product, as well as information on its operation. The information that you get Avery TC9820PHI will certainly help you make a decision on the purchase.
If you already are a holder of Avery TC9820PHI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Avery TC9820PHI.
However, one of the most important roles played by the user manual is to help in solving problems with Avery TC9820PHI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Avery TC9820PHI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
