Instruction/ maintenance manual of the product HSP 2 Sennheiser
Go to page of 17
Instructions for use HSP 2 HSP 4.
1 Contents HSP 2/HSP 4 .............. .............. .............. .............. .............. ............ 2 Features......................... .............. .............. .............. .............. ......... 2 Delivery includes...............
2 HSP 2/HSP 4 High-quality back-electret cond enser headmics, designed for professional “hands free” applications. The adjustable neckband is visually unobtrusive and ver y comfortable to wear. The 12 available HSP variants differ in pick-up pattern, colour and connector.
3 Delivery includes y Boom microphone y Neckband y Neckband connecting cable y Plastic transport case, fo am-lined with cut-out s y Instructions for use y Warranty Certificate Attaching the mic rophone boom The neckband has two holders which are designed so that the microphone bo oms can be worn on either side of the mouth.
4 The cushion delivered with your HSP 2/HSP 4 improves th e wea - ring comfort. If desired, attach the cushion to your microfone boom fastener. Adjusting the neckband You can adjust the neckband to fit all head sizes. To do so, change the l ength of the neckband by pushin g in or pulling out the ear bows.
5 Changing the microphone The connection between the microphone boom and the microphone cable ist very tight. To loosen this connection, in - sert your fingernail into the join and then pull th e connector and the socket apart as shown. Note: When pulling apart, make sure you hold the thick en d of the connector and the so cket (NOT the cable).
6 Positioning the microphone capsule (HSP 2) It is best to ke ep th e mic ropho - ne capsule at the side of the mouth to mi nimise th e risk of popping noises caused by plosi - ves from the mouth. To position the microphone capsule, push the microphone boom backwards or forwards in the holder.
7 Positioning the microphone c apsule (HSP 4) The microphone capsule has a cardioid pick-up pattern and is best placed directly at the corner of the mouth. Note: Do not position the micro - phone directly in front of your mouth as it will pick up your breathing and plosive noises from your mouth.
8 Accessories The following accessories an d/or replacement parts are available for the HSP 2 / HSP 4: Replacement parts for HSP 2 Part Cat. No. Neckband with two holders, anthracite 511709 Neckband w.
9 Replacement pa rts for HSP 4 Part Cat. No. Neckband with two holders, anthracite 511709 Neckband with two holders, beige 511710 Cardioid boom microphon e, beige 511713 Cardioid boom microphone, anth.
10 Overview of product variants Featu re Mi cro ph one (C at. No. ) 3-pin screw special conne ctor ew 3.5mm lockable mini-jack Open-ended cable Platinum cable Flexible gooseneck Anthracite Beige HSP 2.
11 Specifications Specifications HSP 2 Frequency response 20 − 20,000 Hz ±3 dB Pick-up pattern omni-directional Nominal impedance (1 kHz) 1 k Ω Min. termin ating impeda nce 4.7 k Ω Sensitivity 2 mV/Pa ± 3 dB Diametre of mic capsule 4.8 mm Max. sound pressure level 1 50 dB Equivalent noise level 28 dB (A) Supply current approx.
12 Polar diagram HSP 2 Frequency response curve HSP 2 0 ° 5 1 0 1 5 20 2 5 dB 30 ° 60 ° 90 ° 30 ° 60 ° 90 ° 12 0 ° 1 50 ° 1 80 ° 1 50 ° 12 0 ° 2 000 H z 4 000 H z 8000 H z 1 6000 H z 12 5 .
13 Specifications HSP 4 Frequency response 40 − 20,000 Hz ±3 dB Pick-up pattern ca rdioid Nominal impedance (1 kHz) 1 k Ω Min. termin ating impedance 4.7 k Ω Sensitivity 4 mV/Pa ± 3 dB Diametre of mic capsule 8.4 mm Max. sound pressure level 1 50 dB Equivalent noise level 37 dB (A) Supply current approx.
14 Polar diagram HSP 4 Frequency response curve HSP 4 0 ° 5 1 0 1 5 2 0 2 5 dB 30 ° 60 ° 90 ° 30 ° 60 ° 90 ° 12 0 ° 1 50 ° 1 80 ° 1 50 ° 12 0 ° 2 000 H z 4 000 H z 8000 H z 1 6000 H z 12 5.
15 Manufacturer declarations Warranty 2 years CE Declaration of Conformity This equipment is in comp liance with the essential requirements and other relevant provisions of Directives 1999/5/EC, 89/336/EC or 73/23/EC. The declaration is available on the in ternet site at www.
Sennheiser electronic GmbH & Co. KG 30900 Wedemark, Germany Phone +49 (5130) 600 0 Fax +49 (5130) 600 300 www.sennheiser.com Printed in Germany Publ.
An important point after buying a device Sennheiser HSP 2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sennheiser HSP 2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sennheiser HSP 2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sennheiser HSP 2 you will learn all the available features of the product, as well as information on its operation. The information that you get Sennheiser HSP 2 will certainly help you make a decision on the purchase.
If you already are a holder of Sennheiser HSP 2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sennheiser HSP 2.
However, one of the most important roles played by the user manual is to help in solving problems with Sennheiser HSP 2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sennheiser HSP 2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
