Instruction/ maintenance manual of the product EK3253 Sennheiser
Go to page of 36
EK 3253 Instructions for use.
Contents Safet y instructions ..... ........ ..... ........ ...... ........ ....... ...... ........ ........ ..... 6 Deliv ery in cludes ... ..... ........ ..... ........ ........ ...... ....... ...... ........ ........ ..... 7 EK 3253 bodypa ck receiver .
If probl ems occur .. . ............. ...... ........ ..... ........ ........ ..... ........ ........ .. 31 Error che cklist ...... ..... ........ ........ ..... ........ ..... ........ ........ ...... ....... 31 Recom mendations and tips ...... .....
6 Safety instru ction s y Please read these instructions carefully and completely before using the receiver. y Make these instructions easily accessible to al l users at all times. Always include these instructions when passing the receiver on to third parti es.
7 Intended use of the receiver Intended use includes y having read these instructions especially the chapter “Safety instructions” . y using the receiver within the operat ing conditions as described in these instructions.
8 EK 3253 bodypack r eceiver With the wireless in-ear monitori ng system, consisting of the SR 3254 or SR 3256 stereo tra nsmitter and the EK 3253 bodypack receiver, musicians, video and s ound amateurs, reporters/bro adcasters, etc. can directly mo nitor the r eceived sound signals without tr oublesom e cables or monit or speakers being required.
9 The operating controls Headphone outp ut (PHONES), 3.5 mm jack sock et Antenna Red LED for operatio n and battery s tatus indication (LOW BA T/ON ) Green LED for RF signal indication.
10 Indications and displays The LC display Alphanu meric display “B.CH“ – appear s when the channel bank and the channel number are displayed “MHz“ – appe ars when the frequenc.
11 Red LED lit up: The receiver is switched on and the capacity of the batteries/accupack is suffic ient. Red LED flashing: The batteries are/ the accupack is going flat (LOW BA T)! In addition, the 4-step battery status di splay on the display panel provides infor mation on the remai ning battery/accupack capacity: 3 segments: capacity approx.
12 “PILOT” display The “P ILOT” di spla y appea rs o n the displ ay pan el w hen the pilot tone evaluation is activated ( see “Activating/deactivating the pilot tone evaluation – PILOT” on page 29). RF signal indication The level display for RF signal “RF” shows the str ength of the received RF signal.
13 Preparing the receiver for use Insert ing and replaci ng the batte ries For powering the EK 3253 receiver, two 1 .5 V AA size batteries are required. Press the two unlocking buttons an d open the battery compartment co ver . Insert the two batteries as shown in the diagram abo ve.
14 Inserting and charging the accupack The receiver can also be po wered via the recharg eable Sennheiser BA 2015 accupack. Inse rt the accupack into the battery c ompartment as descri bed above. The receiver has two char ging contacts and a sensing contact on its short sides.
15 Using the receiver Switchin g the receiv er on/off T o s witch the receiver on, turn the volume control to the right until it clicks. The red LED lights up. T o s witch the receiver off, turn the volume control to the lef t until it cli cks.
16 Connect the supplied earphones or any Sennheiser stereo headphones with 3.5 mm stereo jack plug to the headphone output (PHONES) . First, set the volume control to the lowest volume by turning it to the left as far as possible. Th en gradually turn up the volume.
17 Adjusting th e balance/FO CUS During stereo operat ion – and provided that the standard display is shown – the / rock er bu tton serves to adjust the balance between the lef t and right stereo signal.
18 The operating menu The buttons Buttons Mo de To ... SET Standard disp lay get into the operating menu Operati ng menu get into the setting mode o f the selected menu Setting mode store the settings.
19 Overview of menus Display Func tion of the menu CHAN Selecting a channel TUNE Setting a receiving frequency for the channel bank “U” (user bank) SCAN Scanning the channel bank for free channels.
20 W orkin g with the opera ting men u By way of example of the “ TUNE ” men u, th is se ction d escr ibes how to use the operating menu. After switching on the receiver, the standard display is shown on the d isplay p anel. Getting into the operating menu Press the SET button to get from the standard d isplay into the operating menu.
21 Adjusting a setting Pres s the / rocker button to adju st the se tting . By briefl y pressi ng the / rock er but ton, th e dis play jumps eithe r forwar ds or bac kwar ds to th e next se tting.
22 The o pera ting menu of t he rec eiver SET Changing the channel STORED CHAN F. 01 B.CH F. 02 B.CH SET SQELCH Setting the squelch threshold Current squelch threshold SET / : LO, MID, HI SET : Stores the setting SQ LO SQ HI STORED DISPLA Y TUNE Setting the frequency for channel bank “U” eingestellten Kanal Current frequency im SET U.
23 HI-BST PILOT Activating/deactivating the pilot tone evaluation SET Pilot tone evaluation activated or deactivated PL T . ON ON PL T . OFF OFF Current balance setting BAL.L 15 15 LOCK Activating/deactivating the lock mode SET Lock mode activated or deactivated LOC.
24 Adjustment tips for the operating menu Selecting a channel – CHAN Via the “ CHAN ” menu, you can switch between the channel s in the channel banks “F” (fixed bank) or “U” (user bank). The channel bank “F“ has up to 16 switchable channels that are factory-preset to customer-specific r eceiving frequencies.
25 Press the SET button to confirm your s election. The recei ver changes immediately to the new frequency. Scanning the channel ba nk for free channels – SCAN Before putting one or several transmis sion links into operation, you should scan the channel bank for free channels.
26 Note: Before adjusting the s quelch threshold to a different setting, use the volume control to set the volume for the connected headphones to the minimum.
27 S tereo/FO CUS sele ction – ST-FOC Via the “ ST-FO C ” menu, you can switch between stereo and FOCUS operation. In both operating modes, the corresp onding transmitter has to be set to stereo operation. When the receiver is set to stereo o peration, the left-right signals are available as usual.
28 S electing th e standard displ ay – DISLPY Via the “ DIS PL Y ” menu, you can select the standard dis play: Ente ring a name – NAM E Via the “ NAME ” menu, you can enter a freely selectable name for the receiver. You can, for example, enter the name of the performer for whom the adjustments have been made.
29 Press the SET button to change to the next segment and select the next character. Have you entered the name completely? Press t he SET button to sto re your setting and t o return to the p revious menu level.
30 Press the two unlocking buttons and open the battery compartment cover . Press the SET button . “LOC.ON” and t he lock mode icon appear on the d isplay. Press the / rocker button . “LOC.O FF” flas hes on the disp lay .
31 If problems occur ... Error checklist If problems occur that are not listed in the abo ve table or if the problems cann ot be s olved with the proposed s olutions, p lease contact your local Sennheiser agent for ass istance.
32 Recommendations and tips ... fo r the receive r y The antenna must not be in direct contact with the body . ... f or optimu m recept ion y Reception range depends to a large extent on location. There should be a “free line of sight” between tr ansmitting and receiving antennas.
33 Additional information HDX noise reduction Progress you can hea r: The product family is equ ipped with HDX , the Sennheiser noise reduction system that reduces RF interference. It in creases the signal-to-noi se ratio in wirele ss audio transmissio n to more than 90 dB .
34 Squ elch Pilot tone squelch When set to stereo op eration, the transmitter ad ds a 19-kHz pilot tone to the audio signal. The receiver checks incoming audio signals to see if the pilot tone i s present. In the absence of the 19-kHz signal, the receiver ’s audio output wi ll remain muted, even if a strong RF signal is present.
35 Specifications EK 3253 bodyp ack rece iver RF characteristics Modulation FM stereo Frequency r anges 518–554, 626–662, 740–776, 786–822, 830–866 MHz Receiving frequencies 1 channel bank w.
36 IE 4 earphones Connector assignment Accessories IE 4: Earpho nes IES 4: 1 pair of ear sleeves for IE 4 earphones BA 2015: Accupack L 2015: Charger for BA 2015 accupack AF output pow er (at peak deviation, 1 kHz AF ) PHONES 2 x 100 mW at 32 Ω Overall unit Temperature range -10 °C to +55 °C Power su pply 2 AA size batteries, 1.
37 Warranty regulati ons The guarantee period for this Sennheiser product is 24 months from the date of purchas e. Excluded are accessory i tems, rechargeable or disposable batteri es that are deliver.
Sennheiser electronic GmbH & Co. KG 30900 W edemark, Germany Phone +49 (5130) 6 00 0 Fa x +49 (5130) 600 300 www.senn heiser.com Printed in Germany P ubl.
An important point after buying a device Sennheiser EK3253 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sennheiser EK3253 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sennheiser EK3253 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sennheiser EK3253 you will learn all the available features of the product, as well as information on its operation. The information that you get Sennheiser EK3253 will certainly help you make a decision on the purchase.
If you already are a holder of Sennheiser EK3253, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sennheiser EK3253.
However, one of the most important roles played by the user manual is to help in solving problems with Sennheiser EK3253. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sennheiser EK3253 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
