Instruction/ maintenance manual of the product Ear Set 4-4-3 Sennheiser
Go to page of 23
EAR SET 1 EAR SET 4 Instruction manual.
1 Contents Safety instructions ............. .................... ..................... .................... ...... 2 Delivery includes .................... .................... ......................... .................. 3 Ear Set 1 ................
2 Safety instructions • Read this instruc tion manual. • Keep this instruction manual. Always inc lude this instruction manual when passing the product on to third parties. • Heed all warnings and fol low all instructions in this instruction manual.
3 Delivery includes Ear Set 1 1 Ear Set 1 ear-worn microphone 1 MZQ 02 cable clip 1 connection cable with silicone tube 1 MZC 1-1 frequency response cap, small 1 MZC 1-2 frequency response cap, large .
4 Ear Set 1 / Ear Set 4 The Ear Set 1 and Ear Set 4 are high- quality pre-polarized condenser ear-worn mi crophone s designed for professional appli - cations. They differ from each other in their pick-up patterns ( see the polar diagrams in the chapter “Specifications”).
5 Putting into operation W earing the ear-worn microphones Your ear-wo rn microphone comes with a preinstalled connection cable and is ready for operation on delivery. The Ear Set 1 with its omni-direc - tional pick-up pattern can b e worn on the left or right ear.
6 Adjusting the earband to the shape of your ear 왘 Put on the ear-worn micro - phone. The earband has to closely follow the shape of y our ear. T o improve the wearing comfort, make sure that the end of the connector is placed in fron t ( A ) or behind ( B ) the microphone boom.
7 Positioning the micropho ne boom towards the corner of the mouth For best possible fit and co mfort and optimu m trans mission quality, the microphone boom has to be adjust ed to the shape of your face. 왘 If necessary, bend the earband again in order to adjust the angle of t he micropho ne boom.
8 The supplied hypoallergenic adhe - sive tape allows you to addition - ally fix the microphone boom to the cheek. 왘 Remove the white protective foil ( A ). 왘 Stick the adhesive tape ( B ) over the microphone boom. 왘 Remove the thin protective foil ( C ) from the upper side of the adhesive tap e.
9 T reble boost using the MZC 1-1 and MZC 1-2 frequency response caps (Ear Set 1 only) The Ear Set 1 is supplied with two different frequency response caps. These caps allow you to adjust the treble response of the microphone (see the frequency response curve in the chapt er “Specificatio ns”).
10 The supplied hypoallergenic adhesi ve tape allows you to addition - ally fix the connection ca ble to the neck. 왘 Remove the white protective foil ( A ). 왘 Stick the adhesive tape ( B ) over the connection cable. 왘 Remove the thin protective foil ( C ) from the upper side of the adhesive tap e.
11 V ariants Ear Set 1 Ear Set 4 Variants Cable and connec tor type Cat. No. Ear Set 1-4 Black cable with special connector 504230 Ear Set 1-4-3 Beige cable with special connector 504231 Ear Set 1-ew Black cable with 3.5 mm jack plug, locka ble 504232 Ear Set 1-ew-3 Beige cable with 3.
12 Care and maintenance Cleaning the sound inlet basket 왘 T o clean or repla ce the sound inlet basket, ca refully pull it from the caps ule. 왘 Moisten a small brush (bristle brush or toothbrush) with isopropyl alcoho l. 왘 Carefully br ush off the sound inlet bask et.
13 Cleaning the contacts of the connection cable Over time, salt depo sits from sw eat can build up on the connector and the socket. Clean the connecto r and the socket using standa rd isopropyl alcohol. T o loosen the connection: 왘 Slide the silicone tube aside.
14 왘 Rinse the connector and the socket with isopropyl alcohol to remove the remainin g salt deposits. 왘 Dry the connector and the socket using a soft clo th or a small piece of cotton wool a nd carefully tap them off. 왘 Allow the connector and the socket to air dry for approx.
15 Accessories Ear Set 1 Item Cat. No. MZC 1-1 frequency response cap, small, b lack 513179 MZC 1-2 frequency response cap, large, black 521701 MZC 1-1 frequency response cap, small, be ige 513198 MZC.
16 Ear Set 4 Item Cat. No. MZW 4 foam windshield, black 510862 MZW 4 foam windshield, beige 510863 Cable with special connect or, black 530990 Cable with special connect or, beige 530992 Cable with 3.5 mm jack plug, black 530994 Cable with 3.5 mm jack plug, beige 530996 Plastic transport case 535377 MZA 900 P phantom power adapter, 3.
17 Specifications Specifications Ear Set 1 Frequency response 20 to 20,000 Hz ± 3 dB Pick-up pattern omni-directional Nominal impedance (at 1 kHz) 1 k Ω Min. terminating impedance 4.7 k Ω Sensitivity (at 1 kHz) 5 mV/Pa ± 2.5 dB Diameter of mic capsule 3.
18 Polar diagram Ear Set 1 Frequency response curve Ear Set 1 0° 5 10 15 20 25 dB 30° 60° 90° 30° 60° 90° 120° 150° 180° 150° 120° 2000 Hz 4000 Hz 8000 Hz 16000 Hz 125 Hz 250 Hz 500 Hz 100.
19 Specifications Ear Set 4 Frequency response 40 to 20,000 Hz ± 3 dB Pick-up pattern cardioid Nominal impedance (at 1 kHz) 1 k Ω Min. terminating impedance 4.7 k Ω Sensitivity (at 1 kHz) 4 mV/Pa ± 2.5 dB Diameter of mic capsule 8.4 mm Max. sound pressu re level 150 dB Equivalent noise level 37 dB (A) Supply current approx.
20 Polar diagram Ear Set 4 Frequency response curve Ear Set 4 0° 5 10 15 20 25 dB 30° 60° 90° 30° 60° 90° 120° 150° 180° 150° 120° 2000 Hz 4000 Hz 8000 Hz 16000 Hz 125 Hz 250 Hz 500 Hz 100.
21 Manufacturer Declarations W arranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.
EAR SET 1 EAR SET 4 Instrucciones de uso Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Publ. 12/09 A01.
An important point after buying a device Sennheiser Ear Set 4-4-3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sennheiser Ear Set 4-4-3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sennheiser Ear Set 4-4-3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sennheiser Ear Set 4-4-3 you will learn all the available features of the product, as well as information on its operation. The information that you get Sennheiser Ear Set 4-4-3 will certainly help you make a decision on the purchase.
If you already are a holder of Sennheiser Ear Set 4-4-3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sennheiser Ear Set 4-4-3.
However, one of the most important roles played by the user manual is to help in solving problems with Sennheiser Ear Set 4-4-3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sennheiser Ear Set 4-4-3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
