Instruction/ maintenance manual of the product 912 S Sennheiser
Go to page of 13
912 S Bedienungsanleit ung Instructions for use Notice d‘emploi Istruzoni per l‘uso Instrucciones de uso Gebruiksaanwijzing e 912 S_516585_0 207_Sp6.
e 912 S_516585_0 207_Sp6.book Seite 2 Freitag, 28. September 2007 11:09 11.
1 912 S The boundary micropho ne 912 S is a high-quality, pre- polarized condenser microphone with half-cardioid pick-up pattern, designed for picking up speech. Due to its unobtrusive, flat desi gn, it is ideally suited for use on conference tables, altars and lecterns.
2 Feat ur es y Programmable mem brane switch y Programmable frequency response curve y Very unob trusive due to flat design y Extremely rugged sound inlet baske t y Rubber damping plate on base to minimize structure-born noise y Mounting slots for mounting th e mi crophone to table tops, lecterns, etc.
3 Postioning the microphone Boundary microp hones make use of the pressure effects at a room boundary and need to be mounted on a flat surface: *) The cardioid pick-up pattern has a n opening angle of approx.
4 Setting the operating mode and frequency response curve Position of DIP switches Operating mode 쐃 Position of DIP switches Frequency response curve 쐇 Permanently switched on (ON) Low cut, ca n b.
5 Operating Mode 쐃 : y Permanently switched on: disables the switch comple tely, the microphone is permanently switched on. y Push-to-talk (PTT): The micropho ne is switched on as long as the membrane switch is pressed. y Push-to-mute (PTM): The microphone is switched off as long as the membrane switch is pressed.
6 Polar d iag ram e 912 S_516585_0 207_Sp6.book Seite 6 Freitag, 28. September 2007 11:09 11.
7 Frequency response curve - 40 - 50 - 60 - 70 - 80 20 50 100 200 500 1000 2000 5000 10000 20000 Hz Low and high boost (factory preset) - 30 dBv Rumble filter (low cut) Low boost Linear ( 912) - 40 - 50 - 60 - 70 - 80 20 50 100 200 500 1000 2000 5000 10000 20000 Hz - 30 dBv e 912 S_516585_0 207_Sp6.
8 Specifications Pin assignment of XLR-3 connect or Transducer principle pre-polarized condenser microphone Frequency resp onse 20 – 20,000 Hz Pick-up pattern half-cardioid Sensitivity (free fi eld, no load) (1 kHz) 6 mV/Pa ( facto ry preset ) 10 mV/Pa (lin) Nominal impedanc e (1 kHz) <100 Ω Min.
9 Overview of microphone applications Va r i a n t Application e901 e902 e904 e905 e906 e908B e908B ew e908D e908T ew e912 e912 S e914 e935/e945 Vo c a l s x Choirs x x Studio, acoustic instruments x .
10 Manufacturer Declarations Wa rr a n t y 2 years CE Declaration of Conformity Sennheiser electronic GmbH & Co. KG declare that this device is in compliance with the applicable CE standards and regulations. WEEE Declaration Please dispose of this produ ct by bringing it to your local collection point or recyclin g centre for such equipment.
Sennheiser electronic Gm bH & Co. KG 30900 Wedemark, Germany Phone +49 (5130) 600 0 Fax +49 (5130) 600 300 www.sennheiser.com Printed in Germany Publ.
An important point after buying a device Sennheiser 912 S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sennheiser 912 S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sennheiser 912 S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sennheiser 912 S you will learn all the available features of the product, as well as information on its operation. The information that you get Sennheiser 912 S will certainly help you make a decision on the purchase.
If you already are a holder of Sennheiser 912 S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sennheiser 912 S.
However, one of the most important roles played by the user manual is to help in solving problems with Sennheiser 912 S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sennheiser 912 S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
