Instruction/ maintenance manual of the product SK-910RC4Q SECO-LARM USA
Go to page of 8
Manual Central Receiver SK -910RC4Q Note: Model numbers t hat end with “Q” or t hat have a round green “Q” sticker signify Ro HS -compli ant products.
ENFORCER SK-910RC4Q Central Receiver 2 SECO-LARM U.S.A., Inc. Table of Contents: Introduction ..................................................... 2 Alert Tones ..................................................... 4 Specifications ..................
ENFORCER SK-910RC4Q Central Receiver SECO-LARM U.S.A., Inc. 3 Front: 1. Mount in a convenient location where a lert tones and LED indicato rs will be audible/visible. 2. Do not install in a location sur round ed by metal as RF signals may be blocked, decreasing r ange.
ENFORCER SK-910RC4Q Central Receiver 4 SECO-LARM U.S.A., Inc. Display Channel M emory: 1. Press a channel’s program ming button once. 2. The number of flashes is th e same as th e number of transmitter s that channel ha s learned. Clear Channel Memo ry: 1.
ENFORCER SK-910RC4Q Central Receiver SECO-LARM U.S.A., Inc. 5 Programming Ea ch Channel Out put : 1. Each channel output can be separately programmed for one of four different modes : Time d O utpu t: W hen the chan nel r ecei ves a si gnal , the rel ay w ill turn ON f or 1~60 seco nds, dep endin g o n th e out put time set .
ENFORCER SK-910RC4Q Central Receiver 6 SECO-LARM U.S.A., Inc. Setting the Timed Out put: When a channel is set to Timed Output, triggering the channel will activate the relay for a set period of time. F actory default is 1 second. 1. The time can be set from 1~60 seconds using the Timer switches on the top of the receiver.
ENFORCER SK-910RC4Q Central Receiver SECO-LARM U.S.A., Inc. 7 Setting the Power LED: The power LED can be set to Bright, Dim, or O FF using the power LED jumper . 1. Locate the jumper on the PCB as shown below. 2. Pl ace the j umpe r on the midd le and ri ght pins for Dim, and on the middl e and le ft pi ns f or B righ t.
ENFORCER SK-910RC4Q Central Receiver 8 SECO-LARM U.S.A., Inc. Troubleshooti ng: WARRANTY This SECO-LARM p roduct is warranted against defects in material and workmanship while use d in normal service fo r a period of one (1) year from the date of sale to the original consumer customer.
An important point after buying a device SECO-LARM USA SK-910RC4Q (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SECO-LARM USA SK-910RC4Q yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SECO-LARM USA SK-910RC4Q - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SECO-LARM USA SK-910RC4Q you will learn all the available features of the product, as well as information on its operation. The information that you get SECO-LARM USA SK-910RC4Q will certainly help you make a decision on the purchase.
If you already are a holder of SECO-LARM USA SK-910RC4Q, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SECO-LARM USA SK-910RC4Q.
However, one of the most important roles played by the user manual is to help in solving problems with SECO-LARM USA SK-910RC4Q. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SECO-LARM USA SK-910RC4Q along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
