Instruction/ maintenance manual of the product SD-961A-36 SECO-LARM USA
Go to page of 2
b. The height of the push bar from the floor may be subject to local regulations. c. The best looking installation will have the push bar centered on the door , as measured from the left and right. However , before drilling the holes, make sure the door opens and closes properly .
End cap Square- head bolt to lock the push bar Machine screws Rubber cover for square head bolt Switch 1 Switch 2 { { Figure 1: Installation of the SD-961A-36 Included: 1 x Push bar 1 x Ke y 4 x Sex bolts 4 x Machine screws 4 x W ood screws 9.8mm hole for sex bolts (outside the door) 6mm hole for screws (inside the door) 1.
An important point after buying a device SECO-LARM USA SD-961A-36 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SECO-LARM USA SD-961A-36 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SECO-LARM USA SD-961A-36 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SECO-LARM USA SD-961A-36 you will learn all the available features of the product, as well as information on its operation. The information that you get SECO-LARM USA SD-961A-36 will certainly help you make a decision on the purchase.
If you already are a holder of SECO-LARM USA SD-961A-36, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SECO-LARM USA SD-961A-36.
However, one of the most important roles played by the user manual is to help in solving problems with SECO-LARM USA SD-961A-36. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SECO-LARM USA SD-961A-36 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
