Instruction/ maintenance manual of the product 934.5512559 Sears
Go to page of 40
OWNER'S MANUAL MODEL NO. 934.55125590 CONTENTS IMPORTANT SAFEGUARDS .................. 2 PRECAUTIONS ............................ 4 FEATURES ................................ 5 SUPPLIED ACCESSORIES ................... 6 OPERATING CONTROLS AND FUNCTIONS .
WARNING: ] TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. lSK OF E-- SHOCK, DO NOT REMOVE COVER (OR BACK)F_O USER SERVICEABLE PARTS INSIDE. SERVICING TO QUALIFIED SERVICE PERSON- NEL. The important note is located on the rear of the cabinet.
FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE GROUND ANTENNA LEAD IN WIRE ELECTRIC SERVICE EQUIPM NEC - NATIONALELECTRICAL CODE $2898A DISCHARGE UNIT (NEC SECTION 810-20 GROUND.
PRECAUTIONS I[oIe_YU(O_ For safe operation and satisfactory performance of your VCR, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places.
FEATURES • Rotary 4-head Record/Playback System- Rotary 4-heads to ensure excellent picture quality and special effects playback. • Auto Power On and Off System- Automatically turns the VCR on as you insert the cassette, turns off after auto-rewind, and ejects when the beginning of the tape is reached.
SUPPLIED ACCESSORIES Remote 2ontrolUnit II PART NO. Batteries AAx 2 Coaxial Cable (UREMT30SR003) NOTES: • If you need to replace these accessories, please refer to the PART NO.
1 Cassette Compartment 2 STOP/EJECT button-Press to stop the tape mo- tion. Press again to removethe tape from VCR. 3 PLAY button-Press to begin playback of a tape. 4 REW(ind) button-Press to rewind the tape,or to view video in reversedirection at a faster than nor- mal speed.
REMOTE CONTROL OPERATION You can operate most of your VCR's functions from the Remote Control (included). The buttons on the Remote Control have the same functions as the corresponding buttons on the VCR. ! ! [0,%,m m u: i a a [o] u u m 1 POWER/TIMER REC button-Press to turn VCR on and off.
@HN_NEL MENU SELECT RE.NO PLAY F.FWD PAUSEJ_TILL 9 8 6 5 4 3 1 0 • I_k'Jl It*;1 III III I_[ltll H i I De ;y;11 Ii il DI q I P[,,,1 Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.
ANTENNMCABLE SYSTEM CONNECTIONS For some of the most common types of connections, see the following drawings. Use only one connection. For any further complex connections, please contact your local dealer or other qualified persons. (You may need additional accessories which are not supplied).
(l)Disconncct the VHF coaxial amcnna cable and the UHF flat twin-lead antenna cable from the back of your "IV set. (2)Reconnect those cables to a UHF/VHF combiner (not supplied). (3)Connect end of the UHF/VHF combiner to the ANT. IN terminal of the VCR.
If your TV has A/V input jacks, you may connect your VCR's AUDIO/VIDEO OUTPUT jacks to the audio/video input jacks on back of your TV. Direct audio/video connections usually result in a better picture and sound quality for tape playback. Please see your TV's owner's manual for details.
If your cable service supplies you with a cable converter box, you can use the basic connection shown below. TO RECORD AND VIEW A SCRAMBLED/UNSCRAMBLED CHANNEL. I. Press TV/VCR button so that "VCR" appears on the display. 2. Set the TV channel to the same video output channel as the switch located on the back of the VCR (CH3 or 4).
CHANNEL MEMORY PROGRAMMING (Without a Cable Box) Channel memory programming is NOT needed when connected to a CABLE BOX. You can program the tuner to scan only the channels you receive in your area. • You must use remote control for this procedure. NOTES: • Follow the steps below, once.
II I[O] I] D! II DIII D!_q I] !] H ',t Dk_l DIII[OI; Ir.,1_,1¢,1 DI m Use this proccdurc to delete from memory the chalmcls yt)tl .t) longcr lccclvc or seldom watch and to manually add to memory previously deleted channels. • Turn on the TV and set the TV channel to the same video output channel located on the back of the VCR.
iE'I"IING THE CLOCK Set the clock accurately for proper automatic timer recording. We suggest that you use a TV or radio station as your time source. • VCR Power must be on. • Turn on the "IV and set the TV channel to the same video output channel located on the back of the VCR.
TO CHANGE CLOCK SETTING If you want to change the clock, 1 Turn on the VCR. 2 Turn on the TV and set the TV channel to the same video output channel located on the back of the VCR. (CH 3 or 4) 3 Press the TV/VCR button so that "VCR" appears on the display.
VIEWING AND RECORDING THE SAME PROGRAM • VCR Power must be on. • Turn on the TV and set the TV channel to the same video output channel located on the back of the VCR. (CH 3 or 4) • Press the TV/VCR button so that "VCR" appears on the display.
RECORDING ONE PROGRAM WHILE VIEWING ANOTHER You can record one program while viewing another. To start recording, follow steps [ 1 ] to [4] under "VIEWING AND RECORDING THE SAME PROGRAM" on page 18. If you set the TV channel to 3 or 4 channel, press TV/VCR button so that "VCR" disappears from the display.
Select item I(ONCE) with number buttons. The CHANNEL digits flash. Enter your desired CHAN- NEL with number buttons. Enter your desired HOUR with number buttons. Enter your desired MINUTE with number buttons. I O_E TIME PR0_RAM _] In_OGnAM HUMBleR 1 "Jh.
DAILY PROGRAM (MONDAY-SUNDAY) To record a program at the same time on the same chan- nel every day, follow steps [1] to [5] on page 19, then step [6a] below. Select item 2(DAILY) with number buttons. I_ILY PROGAAIO _] 1_O3RAM MJtaBER I IENOTIME _ _1_:.
QUICK SET PROGRAM You may set the VCR to start and end recording one program within 24 hours by simply pressing QUICK SET PROGRAM button on the VCR. It is easy for you to set the timer for recording today's TV program. * VCR power must be on to set Quick Set Program.
When the programs overlap, Quick Set Program has priority. But if an another program has been acti- vated when the start time of the Quick Set Program comes, the Quick Set program will be begun after fin- ished the faster program. PROGRAM 2 I I oui, s.
INDEX SEARCH This feature provides a method of indexing the starting point so that it can be easily returned to in either fast forward or rewind mode. • The index mark will be made automatically when the REC button is pressed. It will also be marked at the starting point of Timer recording and OTR.
TIME SEARCH The Time Search function makes it possible to quickly advance the tape from any position by entering the exact desired amount of playback time of the part that you want to skip. • VCR Power must be on. • Turn on the TV and set the TV channel to the same video output channel located on the back of the VCR.
BLANK SEARCH This function enables you to search lot the unrecorded porlioJ, ol the tapc in the forward direction. • Tape must be fully rewound. • VCR Power must be on. • Turn on the TV and set the TV channel to the same video output channel located on the back of the VCR.
SETTING THE REMAINING TIME You can set the remaining tape running time of your tape. • If your cassette tape length is T- 130 or less, select "~T 130". For example, the popular T- 120 cassette tape calls for the "~Ti 30" selection.
JUST-IN TIME RECORDING This function allows you to fully utilize the available tape length for timer recording. The VCR calculates the remaining tape amount and then adjusts the tape speed from SP to SLP as needed.
OTR (ONE TOUCH RECORDING) The One Touch Recording function enables you to record a program simply by pressing OTR button on the VCR. According to the table, simply press OTR button as many times as needed to set the desired recording length. The channel number to be recorded and recording length will be shown on the display.
PLAYBACK Turn on the TV and set the TV channel to the same video output channel located on the back of the VCR. (CH3 or 4) vrl Insert a tape. VCR will automatically turn on. Press PLAY button. (If the erase-protection tab has been removed, the VCR will start playback automatically.
REN'IAL PLAY This function enables you to improve tile picture quality when playing back worn cassettes such as those rented from a video shop. • VCR Power must be on. • Turn on the TV and set the TV channel to the same video output channel located on the back of the VCR.
COUNTER MEMORY The TAPE COUNTER MEMORY button can be used during rewind or fast forward to automatically stop the tape when the counter reaches a preset memory position of approx.
SPECIAL FEATURES l Picture Search (SP/LP/SLP Mode) J You may view a video tape at a high speed in either a forward or reverse direction. This feature is useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted.
VIDEO CASSETTE TAPE This VCR will operate with any cassette that has the VHS mark. For best results we recommend the use of high-quality tapes. • Do not use poor quality or damaged tapes. The table below shows the recording/playback time us- ing "1"-60, T-120 or T-160 tapes in the SP, LP or SLP mode.
TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your VCR, locate the SYMPTOM in the left column below. Check the corresponding POSSIBLE CAUSE and CORRECTIVE ACTION columns to remedy the problem.
MAINTENANCE [l_! LIK_I_JII [_[lfl • Wipe the front panel and other exterior surfaces of the VCR with a soft cloth immersed in lukewarm water and wrung dry. • Never use a solvent or alcohol. Do not spray insecticide liquid near the VCR. Such chemicals may cause dam- age and discoloration to the exposed surfaces.
SPECIFICATIONS Television system Video head Tape width Tape speed SP LP SLP Tuner channel VHF UHF Cable channel RF converter Converter output Timer indication Operating temperature Terminals Antenna input Antenna output Video input/output Audio input/output : NTSC, TV standard : Rotary 4-head Double Azimuth Video System : l/2inch (12.
MEMO - 38 - EN __ ,A, ,k-k 5B24.
For the repair or replacement parts you need Call 7 am - 7 pm, 7 days a week 1-800-366-PART (1-800-366-7278) For in-home major brand repair service Call 24 hours a day, 7 days a week 1-800-4-REPAIR (1.
OWNER'S MANUAL MODEL NO. 934.55125590 Z SEARS VIDEO CASSETTE RECORDER WITH REMOTE CONTROL Your Sears Video Cassette Recorder has added value when you consider that Sears has service units nationw.
An important point after buying a device Sears 934.5512559 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sears 934.5512559 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sears 934.5512559 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sears 934.5512559 you will learn all the available features of the product, as well as information on its operation. The information that you get Sears 934.5512559 will certainly help you make a decision on the purchase.
If you already are a holder of Sears 934.5512559, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sears 934.5512559.
However, one of the most important roles played by the user manual is to help in solving problems with Sears 934.5512559. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sears 934.5512559 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
