Instruction/ maintenance manual of the product 831.297741 Sears
Go to page of 24
SEARS Model No. 831.297741 Serial No. The serial number can be found in the location shown below. Write the serial number in the space above. E_X z=" R C I S _" EQ u i F, I,,.4 i=- I,,4T 11Oil I _1 i Iol _ 11-I HELPLINE! 1-800-736-6879 USER'S MANUAL SEARS, ROEBUCK AND CO.
PRO;FORM TABLE OF CONTENTS • IMPORTANT PRECAUTIONS .................................... • BEFORE YOU BEGIN .......................................... "ASSEMBLY .................................................. HOW TO USE THE PULSE SENSOR ...
IMPORTANT PRECAUTIONS.
BEFORE YOU BEGIN Thank you for selecting the PROFORM" 730si tread- mill. The 730si treadmill blends advanced technology with innovative styling to provide you with an excellent form of cardiovascular exercise in the convenience and privacy of your home.
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dis- pose of the packing materials until assembly is completed. Tools required for assembly: The included allen wrench _ andyour phillips screwdriver _ and two adjustable wrenches _ .
6" 5. Move your dght hand to the position shown at the right, and hold the treadmiti firmly. Using your left hand, rift the storage latch. Raise the treadmill until the locking pin • snaps into the storage latch. Make sure that the locking pln Is Inslde the storage latch, and that the storage latch Is fully closed.
9. Attach the Pulse sensor (105)to one ctthe Headbands (106 or 107). Make sure that the sensor window is pressed through the indicated hole in the Headband.
'HOLY TO' USE THE PULSE'SENSOR 8" The unique headband-stTle pulse sensor Is specta ly designed for greater accuracy, comfod, and durability. To get the best performance from the pulse sen- sor, please read the f611owing Instructions.
• OPERATION AND ADJUSTMENT ..... " THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE _', a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form.
DIAGRAM OF THE CONSOLE !'- _2481_=Niumn__ c,:: ,_--' 5 7 "159 "(z_"*'___.h----', r _o,,,,., _-= .- owlU_m _E/A_C_ff -. 3.5J Tp Note: If there is a thin sheet of clear plaso ulse Sensor Jack tic on the face of the console, remove it.
B Insert the key fully Into the console. Stand on the foot rails and insert the key. Various displays and in- dicators will light. Find the dip attached to the key, and slide it onto the waistband of your cloth- ing. B Select the MANUAL mode. When the key is in- serted, the manual mode will automatically be selected.
12 B Change the incline of the treadmill, if desired. The incline of the tread- mill is controlled with the INCLINE increase and t_INCUNE_I decrease buttons. Each time one of the buttons is pressed, the incline will change by 0.5%. The buttons can be held down to change the incline more quickly.
up period and encl with a cool-down period. (See WORKOUT GUIDEUNES on pages 22 and 23.) The WARM-UP & COOL-DOWN indicator will light when your workout intensity is Ideal for warming up or cooling down.
O Put on the pulse sensor, if desired. For the PULSE display to show your pulse, the pulse sensor must be worn. To put on the pulse sensor, see HOW TO USE THE PULSE SENSOR on page 8. Plug the pulse sensor wire fully into the jack on the front of the console.
The FAT BURN and AEROBIC programs automatically control the speed and incline of the treadmill to keep your pulse within a predetermined range during your workouts. Both programs are 30-minute programs. The speed profiles on the left side of the console show how your pulse will change during each program.
16 if you increase the speed, the incline will automati- cally decrease; if you decrease the speed, the in- cline will automatically increase. If you increase the incline, the speed will automatically decrease; if you decrease the incline, the speed will automatically in- crease.
When the TIME display reaches 4 m!nutes, the ... seconds of any 4-minute pedod (after 4 minutes CALORIES display will show "L 2," indicafing th'at ..... _ after; 8 rnlnutes, e'tc_),-the'walkih_ bel_w_li _1_' fo a_ the second 4-minute period has begun.
HOWTO'FOLD AND MOVE THE TREADMILL ................. HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill for storage, unplug the power cord. To prevent damage to tSe pulse sensor, be sure to unplug the pulse sensor from the console.
•HOW TO LOWER THE TREADMILL FOR USE 1. Hold theupper end of the treadmill withyour right hand as shown..Using your lefthand, lift thestorage latch. Pivot the treadmill slightly untilthe I_king plnis out Of the storage latch. Close thestorage latch. 2.
TROUBI E:SHOOTING " " ' 2O Most treadmill problems r.an be solved by following the Simple Steps below. Rnd the sym'p|omthat ap-- .... plies, and follow the steps listed. If further assistance Is needed, call bur toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.
. c.-Error code-"E3" may appear in the SPEED display if the speed of the walking belt surges above the selected speed setting. Remove the key, wait for ten seconds, and then reinsert it. If the error code appears again, call our toll-free HELPLINE.
CONDiTIONINGGUiDELINES .... The following guidelines will help you to plan your ex- emise program. Remember--these are general guide- lines. For more detailed information about exercise, obtain a reputable book or consult your physician.
Training Zone Exercise After warming up, increase the intensity of your exer- cise until your pulse is in your training zone for 20 to 60 minutes. (During the first few weeks of your exer- cise program, do not keep your pulse in your training zone for longer than 20 minutes.
Model No. 831.297741 QUESTIONS? If you find that: • you need help assembling or operatthg the PROFORM e 730sl treadmill • a part is missing • or you need to schedule repair service call our toll.
An important point after buying a device Sears 831.297741 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sears 831.297741 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sears 831.297741 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sears 831.297741 you will learn all the available features of the product, as well as information on its operation. The information that you get Sears 831.297741 will certainly help you make a decision on the purchase.
If you already are a holder of Sears 831.297741, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sears 831.297741.
However, one of the most important roles played by the user manual is to help in solving problems with Sears 831.297741. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sears 831.297741 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
