Instruction/ maintenance manual of the product 831 297241 Sears
Go to page of 16
® 0-8 MPH ° 2.0 HP" STEP INCLINE° PROGRAMMABLE SPEED Model No. 831.297241 Serial No. The serial number can be found in the location shown below. Write the sedal number in the space above. Serial Number _kCAUTION!: Read all safety precautions and instructions in this manual before using this equipment.
FULL 90 DAY WARRANTY For 90 days from the date of purchase, when proper assembly and maintenance procedures detailed in the Owner's Manual are followed, SEARS will, free of charge, repair or replace and install a replacement part for any defective part, when this treadmill is used in a normal manner.
® 0-8 MPH • 2.0 HP * STEP INCLINE • PROGRAMMABLE SPEED TABLE OF CONTENTS IMPORTANT SAFETY PRECAUTIONS ......................................................... 4 BEFORE YOU BEGIN ...................................................................
IMP(: PRE( IS 1, st least 8 feet of clearance behind the tread- mill. Do not place the treadmill near water, out- doors o[ on any surface that blocks an air opening. Do not operate where aerosol prod- ucts ere used or where oxygen Is being admln- Istercd.
BEFORE .YOUBEGIN_ '_ yOU for selectlqg _e SEARS.UFESTYLEFP 8.0:::_ _ (excluding.holidays); :To help us assist you/please EXP _mill_:TheL FES'r_R8.O'EXP tm_admiil _!_'_ note the product model number and sedal number blends advanced technology with innova_tive :designto before calling.
ASSEMBLY Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY: The 7/32" allen wrench included and your own adjustable wrench _'_.
OPERATION AND ADJUSTMENT APPLYING SILICONE LUBRICANT To reduce the friction of the walking belt and minimize wear, a non- oil-, non-petroleum-base silicone lubricant must be applied to the .walking platform before the treadmill is used. Failure to apply lubri- cant will reduce treadmill performance.
DIAGRAM OF THE CONSOLE The heart of the treadmill is the state-of-the-art programmable console. The console offers both manual and pro- gram operation, and features an array of independent LCD displays to give you continuous exercise feedback. Please read these instructions carefully before operating the console.
Each program is divided into eight equal time periods, called segments. The speed of the walking belt will change automatically at the beginning of each segment. A speed setting should now be programmed for each of the eight segments, using the eight programmable speed controls on the left side of the console.
TROUBLE-SHOOTING AND STORAGE Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our Customer Service Department toll-free at 1- 800-999-3756, Monday through Friday, 6 a.
4. SYMPTOM: THE WALKING BELT IS OFF-CENTER OR SLIPS WHEN WALKED ON a. If the walking belt has shifted to the left, first remove the safety key and UNPLUG THE POWER CORD. Using the 3/16" allen wrench, turn the left rear roller adjustment bolt clockwise, and the right bolt counterclockwise, 1/4 of a turn each.
CONDITIONING GUIDELINES Th e following guldellnes Willhelp you to plan y0ur. _ i, :: :_: During the.fi_t fe._._onths of y0_e:<e_c_'se-pr_gram , exemlse program. Remember that proper nutdtion and _ : keep your head.iate.llear the Io_/end_f _,ourrtraining adequate rest are essential for successful results.
SUGGESTED STRETCHES • The following stretches can provide a gond warm-up or cooFdown, Correct form for each_ stretch is sh-(_vn in the drawings below. Move slowly as you stretch_never'b0unce. TOE TOUC H STRETCH - Stand with your knees bent slightly and slowly bend forward from your hips.
PART LIST--Model No. 831.297241 R1094A Key Part No. No. Qty. Description Key Part No. No. Qty. Description 1 120786 1 Left Handrail 56 106334 2 116926 2 Cable "rie 57 012149 3 111869 8 Cage Nut 5.
EXPLODED DRAWING---Model No. 831.297241 R1094A 14 13 9O 76 3 98 18 16 85 30 _ 93 59 82 79 / 80 8 11_ 98 15 20 ' i 81 "17 34 56 = 59 8 3 28 ,93 30 31 6 1_7 35 ,-39 .
ORDERING REPLACEMENT PARTS Each TREADMILL has its own MODEL NUMBER. Always mention this MODEL NUMBER when requesting ser- vice or repair parts for your TREADMILL. All parts listed herein can be ordered through SEARS, ROEBUCK AND CO. SERVICE CENTERS and most SEARS RETAIL STORES.
An important point after buying a device Sears 831 297241 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sears 831 297241 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sears 831 297241 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sears 831 297241 you will learn all the available features of the product, as well as information on its operation. The information that you get Sears 831 297241 will certainly help you make a decision on the purchase.
If you already are a holder of Sears 831 297241, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sears 831 297241.
However, one of the most important roles played by the user manual is to help in solving problems with Sears 831 297241. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sears 831 297241 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
