Instruction/ maintenance manual of the product C-EDID-RW Avenview
Go to page of 10
www.avenview.co m 1 EDID Reader / Wri ter User’s Guide Models C-EDID- RW © 2008 Avenview Inc. All ri ghts reserved. The content s of this document are provided i n connection wit h Avenview Inc.
www.avenview.co m 2 Table of Conte nts Section 1: Getting Started ...................................................................................................................... 3 1.1 Important Safeguards .......................................
www.avenview.co m 3 Section 1: Getting S tarted 1.1 Important Safe guards Please read all of these instr uctions carefully before you use the de vice. Save this manual for future reference. What the warr anty does not cover Any product, on which the serial number has been d efaced, modified or remo ved.
www.avenview.co m 4 1.3 Regulatory Notices Federal Communica tions Commission (FCC) This equipment has been te sted and foun d to comply with Part 15 of the FCC ru les. These limit s are designed to provide reasonable prote ction again st harmful interferen ce in a residential installation .
www.avenview.co m 5 1.7 Panel Description FRONT PANEL 1. DVI Port for Display 2. Power Connector 3. Red LED: Power ind icator 4. Green LED: Indicates EDID’ s writing REAR PANEL 5.
www.avenview.co m 6 1.8 DIP Switch Configur ation 1 2 Mode OFF OFF Reserved mode OFF ON Recording: Connect the monitor to the DVI monitor connector. On ce the record ing process is completed, C -EDID-RW h as copied the EDID from the monitor into flash memory the green LED will t urn off.
www.avenview.co m 7 1.9 Hardware Installa tion To setup Avenview C -EDID- RW follow these steps for connecting to a device: 1.9.1 Read the EDID from a Display 1. Before connecting the Pow er and oth er devices to C-EDID -RW, set the DIP switches at the bottom of C-EDID-RW at 1- OFF 2- ON 2.
www.avenview.co m 8 Ensure that power is connect ed and prop er Com Port is selected. Then click on Au to Scan ComPort 1.10.1 Read EDID - If you would like to r ead EDID information from the con nected monitor, simply cli ck on the butto n “ Read EDID ” .
www.avenview.co m 9 1.10.3 DVI Monitor Write Please ensure that all cables are connected secure ly and both monito r and C -EDID-RW are connected to backup power supply . If during EDID updat e to DVI monitor a power surge happens or serial cable is not unplugged then th is might result in incomplete EDID.
www.avenview.co m 10 Disclaimer While eve ry precaution ha s been taken in t he preparation o f this document, Avenview Inc . assumes no li ability with r espect to the operati on or use of Avenvi ew .
An important point after buying a device Avenview C-EDID-RW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Avenview C-EDID-RW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Avenview C-EDID-RW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Avenview C-EDID-RW you will learn all the available features of the product, as well as information on its operation. The information that you get Avenview C-EDID-RW will certainly help you make a decision on the purchase.
If you already are a holder of Avenview C-EDID-RW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Avenview C-EDID-RW.
However, one of the most important roles played by the user manual is to help in solving problems with Avenview C-EDID-RW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Avenview C-EDID-RW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
