Instruction/ maintenance manual of the product 711-M28 SeaLand
Go to page of 8
1 OWNER’S MANUAL 711-M28 MARINE TRAVELER ® TOILET Dometic Corporation 13128 State Rt 226, PO Box 38, Big Prairie, Ohio 44611-0038 U.S.A. SeaLand Product Hotline 1-800-321-9886 (8:00 a.
2 RECOMMENDATIONS SPECIFICATIONS Product Name: 711-M28 Marine Traveler Toilet Shipping Information: Carton Sizes: Toilet 21" x 18-1/2" x 13-1/2" (533mm x 470mm x 343mm) Tank 19-1/4" x 17-1/2" x 11-1/2" (489mm x 445mm x 292mm) Weight Approx.
3 5. Apply waterproof caulk around underside of thru-hull vent fitting. 6. Install thru-hull vent fitting and secure snugly with nut. Wipe off excess caulk with damp cloth. 7 . Attach remaining end of vent hose to thru-hull fitting with hose clamp. Dockside Discharge Fitting : (not supplied by SeaLand) 8.
4 INSTALLATION INSTRUCTIONS (cont'd) Water line: 17. Locate water valve at rear of flush lever. 18. Attach water supply pipe or hose from water system to inlet fitting on back of water valve. Pedestal cover: 19. Slide back side of pedestal cover around rear of toi- let base and snap in groove.
5 To use antifreeze: 1. Thoroughly flush system with fresh water. 2. Empty holding tank. 3. Drain potable water tank. 4 . Add freshwater antifreeze and water mixture through toilet and into the waste holding tank. Each installation is different, so amounts may vary.
6 TROUBLESHOOTING GUIDE 1. Water will not stay in bowl. 2. Plastic flush ball will not close completely. 3. Water does not shut off in toilet (toilet overflows). 4. Water does not enter toilet bowl properly. 5. Water leaking from water valve. 6. Water leaking from rear of toilet bowl.
7 PARTS LIST Seat Assembly, Bone China Bowl, Bone Half Clamp Kit, Bone Teflon ® & Rubber Seal Kit Base Kit, Bone Pedestal Cover Kit, Bone Flush Ball, Shaft & Cartridge Kit (includes item 10) .
8 MANUFACTURER’S ONE-YEAR LIMITED WARRANTY SeaLand warrants, to the original purchaser only, that this product, if used for personal, family or household purposes, is free from defects in material and workmanship for a period of one year from the date of purchase.
An important point after buying a device SeaLand 711-M28 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SeaLand 711-M28 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SeaLand 711-M28 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SeaLand 711-M28 you will learn all the available features of the product, as well as information on its operation. The information that you get SeaLand 711-M28 will certainly help you make a decision on the purchase.
If you already are a holder of SeaLand 711-M28, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SeaLand 711-M28.
However, one of the most important roles played by the user manual is to help in solving problems with SeaLand 711-M28. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SeaLand 711-M28 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
