Instruction/ maintenance manual of the product P120 Avaya
Go to page of 8
A vaya P120 Quick Start Guide 1. Unpack 2. Rack mount 3. Power up 4. Connect the Cables 5. Basic Configuration 6. Install Device Manager (optional).
1. Unpack Check the package contents for the following • A vaya P120 W orkgroup Switch • A vaya P120 User ’s Guide (on the CD) • Quick Start Guide (this document) • AC power cable • RJ-45 .
2. Rack mount 1. Snap open the ends of the front panel to reveal the scr ew holes. 2. Position the unit in the rack. 3. Secure the unit to the rack, taking car e not to overtighten the screws. 4. Snap closed the hinged ends of the front panel. 5. Y ou can now safely connect cables to the device.
3. Power up 1. Connect the supplied AC power cord to the back panel power supply con- nector (see Figure opposite). 2. Connect the other end of the AC power cable to an AC power outlet (120-240 V AC, 50/60 Hz). 3. The PWR LED lights to indicate power is on, and the OPR LED lights to indicate that the CPU has booted up and is ready for operation.
4. Connect the cables Connect PCs. servers, routers, work- stations, and hubs 1. Connect the appropriate Ethernet con- nection cable (not supplied) to a 10/100 Mbps port on the front panel of the A vaya P120. Y ou can use standard RJ-45 connec- tions.
5. Perform basic configu- ration T o connect a PC terminal or VT -100 terminal to the A vaya P120 1. Connect the terminal or PC to the console port on the P120 using the supplied serial (RJ-45 to DB-9 adapter) cable.
Default Switch Parameters Default Port Parameters Configuration Parameter Default Setting Port Speed and Mode • 10/100M copper ports: auto-negotiation • 100Base-FX ports: 100 full Port Administrat.
6. Install the A vaya P120 Standalone Manager (optional) The A vaya P120 Standalone Manager allows you to configure and monitor the A vaya P120 from your PC. The manager is provided on a CD and comes with the A vaya P120 switch. System Requirements Minimum hardwar e and Operating System requir ements are: • W indows® 95 or NT® 4.
An important point after buying a device Avaya P120 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Avaya P120 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Avaya P120 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Avaya P120 you will learn all the available features of the product, as well as information on its operation. The information that you get Avaya P120 will certainly help you make a decision on the purchase.
If you already are a holder of Avaya P120, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Avaya P120.
However, one of the most important roles played by the user manual is to help in solving problems with Avaya P120. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Avaya P120 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
