Instruction/ maintenance manual of the product CX 100 DP Scott
Go to page of 8
CX 100 DP FM/MW PLL RADIO ALARM CLOCK WITH POWER CRADLE Instruction Manual CR25-SCOTT-AMFM-ENG.indd 1 12/11/2008 16:41:10.
GB 1 PRECAUTIONS Follow the advice below for safe and appropriate operations. PLACEMENT - Do not use the unit in places, which are extremely hot, cold, dusty , or humid.
LOCA TION OF CONTROLS GB 2 BOX CONTENTS 1. Unit 3. Instruction manual 2. AC power cradle 1 2 3 1 4 5 6 7 8 9 10 1 1 12 13 14 15 1 6 17 1 2 3 2 4 5 6 7 8 Unit 1. Speakers (2x) 2. LED AC power indicator via the power cradle 3. LCD display 4. VOLUME +/- buttons 5.
GB 3 Using the AC power cradle Insert the cradle’s AC power cord plug into an AC mains outlet with a 230V AC ~ 50Hz power source and dock the unit into the cradle. The AC power LED indicator lights up indicating that the cradle is supplying the power to the unit.
GB 4 BASIC OPERA TION ON/ Standby mode After connecting the power supply (refer to POWER SUPPL Y), the unit is in standby mode and the clock time is displayed. Press the button to turn on the unit and press it again to go to standby mode. Clock and Alarm time setting 1.
GB 5 1. When the unit is switched on, press the SLEEP button, and “90 ” is displayed. 2. Press the SLEEP button repeatedly to select the duration: 90, 80….each time the button is pressed, the duration is reduced by 10 minutes, until the duration reaches 0.
Listen to the radio 1. Press the button to turn on the unit. 2. Press the BAND button to select FM or MW. 3. Hold down the TUNE/SET +/- button for 2 seconds to launch automatic tuning for stations ( up or down ). Release the button to receive a radio station.
GB 7 Care and maintenance T o clean the casing, unplug the unit and wipe off dust and stains with a soft cloth moistened with a mild soap and water solution only . Do not use benzene, thinner or similar chemicals to clean the casing. MAINTENANCE Radio Tuning range FM: 87.
An important point after buying a device Scott CX 100 DP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Scott CX 100 DP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Scott CX 100 DP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Scott CX 100 DP you will learn all the available features of the product, as well as information on its operation. The information that you get Scott CX 100 DP will certainly help you make a decision on the purchase.
If you already are a holder of Scott CX 100 DP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Scott CX 100 DP.
However, one of the most important roles played by the user manual is to help in solving problems with Scott CX 100 DP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Scott CX 100 DP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
