Instruction/ maintenance manual of the product Cajun P550R Avaya
Go to page of 162
A vaya P550R/P580/ P880/P882 Multiservice Switch ™ A TM Uplink CLI Refer ence Guide V ersion 2.0 May 2002.
A vaya™ P550R ® /P580/P880/P882 Multiservice Sw itch A TM Uplink CLI Reference Guide, V ersion 2.0 © Copyright A vaya Inc. 2002 ALL RIGHTS RESERVED Printed in USA, March 2002 The products, specifications, and other technica l information re garding the products contained in this document are subject to change without notice.
iii Avaya P550R/P580/P880/P882 Multiser vice Switch ATM Uplink CLI Reference Guide, Version 2.0 T able of Contents vii Overview of the Contents.......................................................... 1-vii Technical Support .........................
iv Avaya P550R/P580/P880/P882 Multiser vice Switch ATM Uplink CLI Reference Guide, Version 2.0 set network multiport ..................................................... ... 1-21 set network pnni-level.................................................
v Avaya P550R/P580/P880/P882 Multiservice Switch AT M Uplink CLI Referenc e Guide, Version 2.0 set pvc mbs ................................................ ......................... 1-72 set pvc pcr ....... ............................................
vi Avaya P550R/P580/P880/P882 Multiser vice Switch ATM Uplink CLI Reference Guide, Version 2.0 show running-config ............................................ ........... 1-122 show startup-config ................................... .................
Avaya P550R/P580/P880/P8 82 Multiservice Switch ATM Uplink CLI Reference Gui de, Version 2.0 vii Pr eface This guide explains how to configure and o perate the A vaya Multiservice Switch’ s ™ P580 ® /P882 ® A TM Uplink module (referred to as the A TM Uplink module) using the Command Line Interface (CLI).
viii Avaya P550R/P580/P880/P882 Mu ltiservice Switch ATM Uplink CLI Reference Gu ide, Version 2.0 T ext Conventions This document uses the following text conventions: Convention Represents Examples User Input User entered text. T o enable th e network, enter: set network enable Boldface T ext Menu command, keyword to be acted upon, or button name.
Avaya P550R/P580/P880/P882 Multis ervice Swit ch ATM Upli nk CLI Reference, Version 2.0 ix Related Documentation This section provides information on related documentation, including: ■ Online Documentation ■ Documentation Feedback ■ A TM Forum - http://atmforum.
x Avaya P550R/P580/P880/P882 Mu ltiservice Switch ATM Uplink CLI Reference Gu ide, Version 2.0.
Avaya P550R/P580/P880/P8 82 Multis ervice Switch ATM Uplink CLI Reference Gu ide, Version 2.0 1-1 1 A vaya A TM Uplink Module CLI Commands Overview This chapter describes: ■ Accessing/Exiting the Co.
1-2 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 Command Syntax Conventions T able 1-2 describes the command syntax conventions. T able 1-2. Command Syntax Conventions Privileged The Privileged mode contains commands from the User mode and the commands to set operating parameters.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-3 No Form of Commands Many A TM Uplink CLI commands have a no form. In general, the no form deletes a feature/functi on or restores a default.
1-4 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 Basic Functions Enter a question mark ( ? ) at the system prompt to display the commands in a mode. For other information, use the commands in Ta b l e 1 - 4 .
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-5 Accessing/Exiting the A TM Uplink CLI T o access the A TM Uplink CLI, you must first access the A vaya Multiservice Swith’ s Supervisor console.
1-6 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 * Note: A serial interface should be used to configure an IP address and user account for the switch. Default accounts are: • root •d i a g • manuf 1.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-7 Supervisor Commands This section describes the Smar t Module Command set, which currently consists of the set smart-module flash co mmand.
1-8 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 A TM Uplink Commands This section describes the following commands sets: ■ A TM-Link Comman.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-9 A TM-Link Commands A TM-Link commands are used with RFC1 483 configurations. These commands presume that a V irtual Switch Port (VSP) has already been created.
1-10 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 atm-link Command Mode Configuration Description Create an atm-link. Use the no form of this command to delete an atm-link. * Note: The V irtual Switch Port (VSP) that this A TM Link will belong to must exist prior to creating the atm-link.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-11 set atm-link default-PVC Command Mode Configuration Description Sets the default virtual channel fo r an A TM Link. This command is used when the VSP is a Replicating.
1-12 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set atm-link (enable | disable) Command Mode Configuration Description Enable or disable an A TM link. Disabling an A TM Link effectively blocks traffic to/from the rem ote destination.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-13 set atm-link failover -link Command Mode Configuration Description Sets the atm failover -link. Th e A TM Uplink module supports a failover link.
1-14 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set atm-link mapping Command Mode Configuration Description For the given A TM Link, this command maps an Ethernet priority to a PVC. * Note: All 8 Ethernet priorities should be mapped to a PVC.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-15 set atm-link name Command Mode Configuration Description Changes the name of an A TM Link. Syntax set atm-link <link-name> name <new -link-name> T able 1-12.
1-16 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set atm-link oam-loopback Command Mode Configuration Description Enables or disables OAM-Loopback for the A TM-Link. Enabling OAM Loopback configures the A TM-Link to send an OAM F5 packet every seconds down the default PVC.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-17 show atm-link Command Mode All modes Description Shows the configuration of the atm link specified by vsportId and or link-name.
1-18 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 Outbound Priority 5 : 1-0-1 01 Outbound Priority 6 : 1-0-1 02 Outbound Priority 7 : 1-0-1 02.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-19 Global Commands Global commands configure the A TM Uplink module’ s A TM address and Signalling type (such as PNNI or UNI).
1-20 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set network Command Mode Configuration Description Enable or disable an A TM network. * Note: Y ou must disable a network each time you make a change to the configuration.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-21 set network multiport Command Mode Configuration Description By setting Multiport to Y es, the A TM Uplink module will use PNNI signalling.
1-22 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set network pnni-level Command Mode Configuration Description Set the Private Network-to-Network Interface (PNN I) level. This command is only used when Multiport is set to Y es.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-23 set network pr efix Command Mode Configuration Description Set the A TM address prefix of an A TM network. The prefix is a 13 byte (26 hex digit) number .
1-24 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show network Command Mode All Modes Description Shows A TM network configuration for the A TM Uplink module. Syntax show network Sample Output This example shows the network configuration.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-25 Interface Commands This section describes: ■ set interface (enab.
1-26 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set interface (enable | disable) Command Mode Configuration Description Enable or disable a physical interface to the A TM interface. Physical port 1 is interfaceID 1 and physical port 2 is interfaceID 2.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-27 set interface (medium-type) Command Mode Configuration Description Set the A TM interface medium type to SONET or SDH.
1-28 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set interface (name) Command Mode Configuration Description Name an A TM physical interface. * Note: Y ou must disable an interface each time you make a change to the configuration.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-29 show interface Command Mode All Modes Description Display A TM interface information. Y ou can show both interfaces or explicitly show physical port 1 or 2.
1-30 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 ATM Interface 2 Configuration: ============================== Interface Name : SonetPort2 Ad.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-31 LEC Commands This section describes: ■ clear lec learp ■ set l.
1-32 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 clear lec learp Command Mode Configuration Description Use the clear LEC learp co mmand to clear the LEARP entries for a specific LEC or the entire LEARP table.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-33 set lec agetime Command Mode Configuration Description This command sets the agetime for L EARP entries for the LEC. The valid range is 60 to 3600 seconds with the default value being 1200 seconds.
1-34 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 lec Command Mode Configuration Description Create a LAN Emulation Client (LEC). Use the no form of this command to delete a LEC. Syntax lec <lecName> [<lecID>] no lec <lecID> T able 1-25.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-35 set lec (disable | enable) Command Mode Configuration Description Enable or disable a LEC. * Note: Y ou must disable a LEC each time you make a change to the configuration.
1-36 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set lec (join-method) Command Mode Configuration Description Set the method by which the LEC joins an ELAN. * Note: Y ou must disable a LEC each time you make a change to the configuration.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-37 set lec (max-bus-cellrate-value) Command Mode Configuration Description Sets the maximum total number of cells the A TM Uplink module will send per second to the BUS.
1-38 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set lec (max-count) Command Mode Configuration Description Set the maximum unknown f rame count per time interval f or a LEC.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-39 set lec (max-time) Command Mode Configuration Description Set the unknown frame time interval for a LEC. Refer to the max- count parameter for additi onal information.
1-40 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set lec (name) Command Mode Configuration Description Modifies a LEC name. * Note: Y ou must disable a LEC each time you make a change to the configuration.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-41 set lec (pr oxy) Command Mode Configuration Description Set the proxy mode for the LEC.
1-42 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set lec (qos-domain) Command Mode Configuration Description Set the Quality of Service (QoS) Domain for the LEC. * Note: Y ou must disable a LEC each time you make a change to the configuration.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-43 set lec (selector) Command Mode Configuration Description Set the client selector for the LEC.
1-44 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set lec (server -addr) Command Mode Configuration Description Set the server A TM Address used by the LEC to connect to the ELAN. * Note: Y ou must disable a LEC each time you make a change to the configuration.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-45 set lec (trigger -count) Command Mode Configuration Description Se.
1-46 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set lec (version) Command Mode Configuration Description Set the LEC version. * Note: Y ou must disable a LEC each time you make a change to the configuration.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-47 show lec Command Mode All Modes Description Display LEC configuration. Syntax show lec [<lecID>] T able 1-38. Parameters, Keywords, Arguments Sample Output This example shows the configuration for all LECs.
1-48 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 LEC AMT Address :390000... Client Selector : 0 0 Server ATM Address : C5-0079-00000000 00000.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-49 show lec (learp) Command Mode All Modes Description Shows the A TM address to MAC address mapping for a LEC.
1-50 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 PNNI Commands This section describes: ■ show pnni base-table ■ show pnni if-table ■ sh.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-51 show pnni base-table Command Mode All Modes Description Show PNNI bas e table. Syntax show pnni base-table Sample Output This example shows PNNI base table information.
1-52 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show pnni if-table Command Mode All Modes Description Show PNNI In terface (IF) ta ble. Syntax show pnni if-table Sample Output This example show PNNI IF table information.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-53 show pnni link-table Command Mode All Modes Description Show PNNI lin k table Syntax show pnni link-table Sample Output This example shows PNNI link table information.
1-54 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show pnni map-table Command Mode All Modes Description Show PNNI ma p table. Syntax show pnni map-table Sample Output This example shows PNNI map table information.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-55 show pnni map-addr -table Command Mode All Modes Description Show PNNI map address table. Syntax show pnni map-addr-table Sample Output This example shows PNNI map address table information.
1-56 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show pnni map-node-table Command Mode All Modes Description Show PNNI map node table. Syntax show pnni map-node-table Sample Output This example shows PNNI map node table information.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-57 show pnni metrics-table Command Mode All Modes Description Show PNNI met rics table. Syntax show pnni metrics-table Sample Output This example shows PNNI metrics table information.
1-58 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show pnni nbr -peer -table Command Mode All Modes Description Show PNNI Neighbor (NBR) peer table Syntax show pnni nbr-peer-table Sample Output This example shows PNNI nbr peer table information.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-59 show pnni nbr -peer -port-table Command Mode All Modes Description Show PNNI NBR peer port table. Syntax show pnni peer-port-table Sample Output This example shows PNNI peer po rt table information.
1-60 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show pnni node-table Command Mode All Modes Description Show PNNI node table. Syntax show pnni node-table Sample Output This example shows PNNI node ta ble information.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-61 show pnni node-pgl-table Command Mode All Modes Description Show PNNI node Peer Group Lead (PGL) table. Syntax show pnni node-pgl-table Sample Output This example shows PNNI node PGL table i nformation.
1-62 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show pnni node-svcc-table Command Mode All Modes Description Show PNNI node Switch V irtual Channel Connection (SVCC) table. Syntax show pnni node-svcc-table Sample Output This example shows PNNI node SVCC table information.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-63 show pnni node-timer -table Command Mode All Modes Description Show PNNI node timer table. Syntax show pnni node-timer-table Sample Output This example shows PNNI no de timer table information.
1-64 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show pnni ptse-table Command Mode All Modes Description Show PNNI State T o pology State Element (PTSE) table. Syntax show pnni ptse-table Sample Output This example shows PNNI P TSE table information.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-65 show pnni r oute-addr -table Command Mode All Modes Description Show PNNI route address table. Syntax show pnni route-addr-table Sample Output This example shows PNNI route ad dress table information.
1-66 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show pnni scope-table Command Mode All Modes Description Show PNNI scope table. show pnni scope-table Sample Output This example shows PNNI scope table information.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-67 show pnni summary-addr ess-table Command Mode All Modes Description Show PNNI summary address table. Syntax show pnni summary-address-table Sample Output This example shows PNNI summary address table i nformation.
1-68 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show pnni svccr cc-table Command Mode All Modes Description Show PNNI SVC CRC table. Syntax show pnni summary-address-table Sample Output This example shows PNNI summary SVC CRC table information.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-69 Permanent Virtual Channel Commands ■ pvc ■ no pvc ■ set pvc .
1-70 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 pvc Command Mode Configure Description Creates a Permanent V irtual Channel (PVC). Use the no form of this command to delete a virtual cha nnel.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-71 set pvc cdvt Command Mode Configure Description Sets the Cell Delay V ariation T olerance for the specified pvc. Syntax set pvc <pvcID> cdvt <cdvt-value> T able 1-41.
1-72 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set pvc mbs Command Mode Configure Description Sets the Maximum Burst Size (MBS) for the specified p vc. This can only be set for pvcs with a traffic-class of type “VBR”.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-73 set pvc pcr Command Mode Configure Description Sets the Peak Cell Rate (P CR) for the specified pvc. Syntax set pvc <pvcID> pcr <pcr-value> T able 1-43.
1-74 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set pvc port Command Mode Configure Description Sets the physical port for the specified pvc. Syntax set pvc <pvcID> port <physPortId> T able 1-44.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-75 set pvc priority Command Mode Configure Description Sets the inbound priority for the sp ecified pvc. T raffic received on this PVC will be forwarded through the A v aya switch at this priority level.
1-76 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set pvc r ed-pack Command Mode Configure Description Sets the Red-Pack (random early de tection) ID for the specified pvc. * Note: RED is always disabled and cannot be set for UBR traffic class PVCs.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-77 set pvc scr Command Mode Configure Description Sets the Sustained Cell Rate (SCR) for the specified pvc. * Note: The Sustained Cell Rate must be at least one unit less than the Peak Cell Rate setting.
1-78 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set pvc traf fic-class Command Mode Configure Description Sets the traffic class for the specified pvc. Syntax set pvc <pvcID> traffic-class {cbr | ubr | vbr-nrt | vbr-rt} T able 1-48.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-79 set pvc vci Command Mode Configure Description Changes the vci for the sp ecified pvc. Syntax set pvc <pvcID> vci <vci> T able 1-49.
1-80 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set pvc vpi Command Mode Configure Description Changes the vpi for the specif ied pvc. Syntax set pvc <pvcID> vpi <vpi> T able 1-50.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-81 show pvc Command Mode Configure Description Shows detailed information for the pvc specified in pvcID . Syntax show pvc <link-name> [<pvcID>] T able 1-51.
1-82 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 QoS Domain Commands This section describes: ■ qos-domain ■ no qos-dom ain ■ set qos-do.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-83 qos-domain Command Mode Configuration Description Create a Quality of Service (QoS) domain. Use the no form of the command to delete a QoS domain.
1-84 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set qos-domain (mapping) Command Mode Configuration Description Map Ethernet Frames with a particular priority to a QoS Set. Syntax set qos-domain <qosDomainID> mappi ng <qosHandle> <priority> T able 1-53.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-85 set qos-domain (name) Command Mode Configuration Description Name a QoS domain. Syntax set qos-domain <qosDomainID> name <qos-domain-name> T able 1-54.
1-86 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show qos-domain Command Mode All Modes Description Show QoS Domain configuration information. Syntax show qos-domain [<qosDomainID>] T able 1-55.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-87 This example shows qos-domai n co nfiguration information for all existing qos-domai ns.
1-88 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 QoS Set Commands This section describes: ■ qos-set ■ no qos-set ■ set qos-set (mbs) .
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-89 qos-set Command Mode Configuration Description Create a Quality of Service (QoS) set. Use the no form of this command to delete a QoS set.
1-90 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set qos-set (mbs) Command Mode Configuration Description Set the maximum burst size for a QoS set. Syntax set qos-set <qosDomainID> <qosHandle> mbs <mbs-value> T able 1-57.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-91 set qos-set (name) Command Mode Configuration Description Set the name for a QoS Set. Syntax set qos-set <qosDomainID> <qosHand le> name <name> T able 1-58.
1-92 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set qos-set (pcr) Command Mode Configuration Description Set the Peak Cell Rate (PCR) for a QoS set. Syntax set qos-set <qosDomainID> <qosHandle> pcr <pcr-value> T able 1-59.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-93 set qos-set (priority) Command Mode Configuration Description Set the inbound priority for a Q oS set.
1-94 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set qos-set (r ed-pack) Command Mode Configuration Description Sets the Random Early Detection (RED) pack associated with the QoS Set.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-95 set qos-set (scr) Command Mode Configuration Description Set the Sustained Cell Rate (SCR) for a QoS set. Syntax set qos-set <qosDomainID> <qosHandle> scr <scr-value> T able 1-62.
1-96 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set qos-set (traf fic-class) Command Mode Configuration Description Select a traffic class for a QoS s et. Syntax set qos-set <qosDomainID> <qosHandle> traffic-class {ubr | vbr-nrt | vbr -rt | cbr} T able 1-63.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-97 show qos-set Command Mode All Modes Description Show QoS set configuration. Syntax set qos-set <qosDomainID> [<qosHa ndle>] T able 1-64.
1-98 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 RED Pack Commands This section describes: ■ set random-detect (max-threshold) ■ set rand.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-99 set random-detect (max-thr eshold) Command Mode Configuration Description Set the maximum threshold val ue for a particular RED Pack.
1-100 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set random-detect (min-thr eshold) Command Mode Configuration Description Set the minimum threshold valu e for a particular RED Pack. Syntax set random-detect <redID> min-thre shold <minTH-value> T able 1-66.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-101 set random-detect (pr obability) Command Mode Configuration Description Set the probability factor valu e for a particular RED Pack.
1-102 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set random-detect (thmin-thmax-pr ob-wq) Command Mode Configuration Description Sets all the parameters fo r a particular RED Pack.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-103 set random-detect wq Configuration Description Sets the weight value fo r the queue. Syntax set random-detect <redID> wq <wq-v alue> T able 1-69.
1-104 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show random-detect Command Mode Configuration Description Shows all configured RED Packs. Syntax show random-detect [<redID>] T able 1-70.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-105 System Commands This section describes: ■ copy (filename) ■ c.
1-106 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 copy (filename) Command Mode Configuration or en able (Privileged Mode) Description Copy one file to another file with in NVRAM. This can be useful for storing a copy of a working configuratio n before making changes.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-107 copy (startup-config) Command Mode Configuration or Enable Description Copy a specified file to the startup co nfiguration.
1-108 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 copy running-config startup-config Command Mode Configuration or Enable Description Copy the running configuration to the startup configuration.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-109 dir Command Mode Configuration or Enable Description Display a specific filename or the list of files in NVRAM. Syntax dir [<filename>] T able 1-73.
1-110 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 end Command Mode Configuration or Enable Description Exit the configuration mode and re -enter the privileged mode. This is the same as the Exit command.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-111 erase Command Mode Configuration or Enable Description Erase a specified file from NVRAM. Syntax erase <filename> T able 1-74.
1-112 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 erase startup-config Command Mode Configuration or Enable Description Erase the startup (bootup) co nfiguration file from NVRAM.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-113 exit Command Mode Configuration or Enable Description Exit the current mode and re -enter the previous mode.
1-114 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 help Command Mode All Modes Description Display a full help list of all commands available in the current mode. Syntax help Sample Output This example displays the help lis t of commands available in the User mode.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-115 nvram init ialize Command Mode Configuration Description Initialize NVRAM (Non-V olatile RAM). This erases the contents of NVRAM.
1-116 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 re l o ad Command Mode Configuration or Enable Description Reload the application so ftware and reset the system. When sessioned to the A TM Uplink module , this command resets just the A TM Uplink module.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-117 re s e t Command Mode Configuration Description Reload the software and reset the system. When sessioned to the A TM Uplink module, this command resets just the A TM Uplink module.
1-118 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show boot Command Mode All Modes Description Display information about FEPROM. Syntax show boot Sample Output This example displays FEPROM information.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-119 show file_name Command Mode Privileged and Configuration Description List the contents of a specified file. Syntax show file_name <filename> T able 1-75.
1-120 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show flash Command Mode All Modes Description Display the information about FEPROM. FEPROM holds the application code and boot code that runs t he A TM Uplink module.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-121 show history Command Mode All Modes Description List the commands that have been entered during the current session.
1-122 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show running-config Command Mode Privileged and Configuration Description List the commands that represent the running configuration. Syntax show running-config Sample Output This example shows the running configuration.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-123 show startup-config Command Mode Privileged and Configuration Description List the commands that represent the startup configuration.
1-124 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show version Command Mode All Modes Description Display the software version currently running on the system. Syntax show version Sample Output This example shows the version of software that is currently running.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-125 VPOR T Commands This section describes: ■ vport ■ no vport .
1-126 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 vport Command Mode Configuration Description Create or delete an A TM Port (VPORT). Use the no form of this command to delete a VPOR T . V irtual Ports are used to specify V irtual Path numbers.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-127 set vport (enable | disable) Command Mode Configuration Description Enable or disable a VPORT . Syntax set vport <interfaceID> <vpiNumber > {enable | disable} T able 1-77.
1-128 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set vport (ilmi) Command Mode Configuration Description Configures Interim Local Manage ment Interface (ILMI) address registration on the VPORT .
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-129 set vport (max-vci) Command Mode Configuration Description Set the maximum V irtual Circuit Id entifier (VCI) tag value for a path.
1-130 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set vport (name) Command Mode Configuration Description Sets the virtual port’ s name. * Note: Y ou must disable a VP ORT each time you make a change to the configuration.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-131 set vport (path-cost) Command Mode Configuration Description Set the path cost for routing over an A TM interface for the virtual port.
1-132 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set vport (sig-type) Command Mode Configuration Description Select the version of the User -to-Ne twork Interface (UNI) that is to be used on a virtual port.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-133 set vport (traf fic-shape-rate) Command Mode Configuration Description Configure output maximum number of cells transmitted (or throttling) on this VPORT .
1-134 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show vport Command Mode All Modes Description Show V irtual Port configuration information. Syntax show vport [<interfaceID> <vpiNumb er>] * Note: interfaceID and vpiNumber must either be omitted or include.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-135 This example shows configurati o n information for all existing VPORT s .
1-136 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 VSPOR T Commands This section describes the following commands: ■ vsport ■ no vsport .
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-137 vsport Command Mode Configuration Description Create a V irtual Switched Port. Use the no fo rm o f t h is c om m an d to delete a V irtual Switched Port.
1-138 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set vsport default-link Command Mode Configuration Description Sets the default A TM Link for the V irtual Switched Port identified by vsportId.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-139 set vsport default-port Command Mode Configuration Description Sets the default A TM Link for the V irtual Switched Port identified by vsportId.
1-140 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set vsport default-PVC Command Mode Configuration Description Sets the default Permanent V irtua l Circuit (PVC) for the V irtual Switched Port identified by vsportId.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-141 set vsport (enable | disable) Command Mode Configuration Description Enables or disables the V i rtual Switched Port identified by vsportId .
1-142 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set vsport load-shar e Command Mode Configuration Description Sets the V irtual Switch Port identified by vsportId to be a load- sharing port.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-143 set vsport name Command Mode Configuration Description Changes the name of the V irtual Switched Port identified by vsportId .
1-144 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 set vsport static-laft Command Mode Configuration Description Configure a static LANE Address Forwarding T able (LAF T) entry . The A TM Uplink module manages RFC1483 VSPs as if they were LANE Clients.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-145 set vsport type Command Mode Configuration Description Sets the type of the vsport. This determines the encapsulation format for Ethernet Frames carried across the A TM network.
1-146 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0 show static-laft Command Mode All Modes Description Shows the static LAF T entries for a given VSP . Syntax show static-laft <vsportId> T able 1-94.
Avaya P550R/P580/P880/P882 Multis ervice Switch ATM Uplink CLI Reference Guide, Version 2.0 Avaya ATM Uplink Module CLI Commands 1-147 show vsport Command Mode All Modes Description Shows the configuration for all V irtual Switched Ports configured on the device or for the V irtual Switched Port identified by vsportId .
1-148 Chapter 1 Avaya P550R/P580/P880/P882 Multiservice Switc h ATM Uplink CLI Reference Gu ide, Version 2.0.
1 Avaya P550R/P580/P880/P882 Multiservi ce Switch ATM Uplink CLI Reference Guide, Version 2.0 Index A accessing CLI 1-5 command modes 1-4 accessing command modes 1-1 A TM Forum W eb site 1-ix Av a y a.
2 Avaya P550R/P580/P880/P8 82 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0 show network 1-23 , 1-24 show pnni base-table 1-51 show pnni if-table 1-52 show pnni link-table 1-53 show .
3 Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0 show pnni link-table 1-53 show pnni map-addr -table 1-55 show pnni map-node-table 1-56 , 1-58 show pnni map.
4 Avaya P550R/P580/P880/P8 82 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0 show pnni map-addr -table command 1-55 show pnni map-node-table command 1-56 show pnni map-table command 1.
An important point after buying a device Avaya Cajun P550R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Avaya Cajun P550R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Avaya Cajun P550R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Avaya Cajun P550R you will learn all the available features of the product, as well as information on its operation. The information that you get Avaya Cajun P550R will certainly help you make a decision on the purchase.
If you already are a holder of Avaya Cajun P550R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Avaya Cajun P550R.
However, one of the most important roles played by the user manual is to help in solving problems with Avaya Cajun P550R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Avaya Cajun P550R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center