Instruction/ maintenance manual of the product P4000 Scansonic
Go to page of 12
UK User Manual P 4000.
Contents 02 CONTENTS 03 INFORMA TION 04 FRONT AND REAR P ANEL OVERVIEW 06 CONNECTING YOUR RADIO 06 OPERA TING YOUR RADIO – DAB 07 SELECTING A ST A TION – DAB 07 INFORMA TION SERVICES – DAB 08 OP.
Information Congratulations on your new radio. Please take a moment to read this manual Enjoy . Safety Instructions. Please store this instruction manual for futur e refer ence. • Place the unit on a solid surface • Do not expose Scansonic P4000 to high humidity , direct sunlight, dirt, heavy vibration or extreme temperatur es.
Front panel Rear panel P4000 4.
01 Display OLED display showing all information on the radio. 02 MODE Press to select DAB radio, FM radio or AUX input. 03 SCAN Press to Scan radio channels. 04 TUNE Press to scan radio downwar ds. 05 ST ANDBY Press to go to ST ANDBY mode, Press Longer to Shut down radio.
Connecting your radio 01 Y our radio is supplied with a Mains Adaptor . 02 Place your radio on a at surface. 03 Insert the adaptor plug into the DC socket on the back of your radio. 04 Plug the adaptor into the 230 volts mains socket outlet. Important: The AC adaptor should be disconnected from the mains supply and the radio when not in use.
Selecting a station – DAB 01 The display show the name of the station selected. 02 Press the TUNE – or TUNE + button to scr oll the station list and nd the station.
Operating your radio – FM 01 Carefully extend the telescopic antenna. 02 Press ON/OFF to power on the radio (Use MODE to select to FM). 03 Press TUNE+ button 2 seconds to automatically scan upwards. 04 Press TUNE- button 2 seconds to automatically scan downwards.
Manual clock setting The radio clock can be set manually as below . 01 Press MENU > Utility > Clock Setup. 02 With Rotary please select Date Setting : YYYY : MM : DD. 03 With Rotary please select Time Setting : HH : MM. Setting the alarm The radio alarm allows you to wake up to your desired radio station or a buzz.
Snooze setting The radio has a Snooze function that allows your radio to Alarm after a certain number of minutes. 01 Press MENU > Utility > Snooze Setup. 02 With Rotary please select : 5, 10, 15 or 20 mins. 03 Press SELECT button to end. EQ setting The radio has a EQ function that allows your radio to play with differ ent Equalizer settings.
Band (Mode) DAB,DAB+ & FM & (AUX) Output Power 5 W atts RMS Loudspeaker 3” Full Range Antenna FM & DAB telescopic Power / Battery DC 9V / 6 x AA sized Alkaline Batteries Inputs DC 9V Aux.
enjoy www .scansonic.dk P4000.
An important point after buying a device Scansonic P4000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Scansonic P4000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Scansonic P4000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Scansonic P4000 you will learn all the available features of the product, as well as information on its operation. The information that you get Scansonic P4000 will certainly help you make a decision on the purchase.
If you already are a holder of Scansonic P4000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Scansonic P4000.
However, one of the most important roles played by the user manual is to help in solving problems with Scansonic P4000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Scansonic P4000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center