Instruction/ maintenance manual of the product VCB-3572IRP Sanyo
Go to page of 15
INSTRUCTION MANUAL BEDIENUNGSANLEITUNG MANUEL D’INSTRUCTIONS VCB-3572IRP B/W CCD Camera CCD-Schwarzweißkamera Caméra CCD Noir et Blanc CCD About this manual B efo re in st a ll i ng and us in g the ca m era , pl ea se re ad th is manual carefully.
CON TENTS PRECAUTIONS ..................................................................................... 2 PARTS NAMES ..................................................................................... 3 CONCERNING AUTO-IRIS LENSES .............
PRECAUTIONS In case of problem Do not use the camera if smoke or a strange odour comes from the unit, or if it seems not to function correctly. Disconnect the power cord immediately, and consult your dealer (or a Sanyo Authorized Service Centre). Do not open or modify Do not open the cabinet, as it may be dangerous and cause damage to the unit.
PARTS NAMES 1 Video output connector (VIDEO OUT: BNC type) Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector. 2 External sync composite video signal input connector.
PARTS NAMES 7 Lens mount cap The cap is installed to protect the lens mount section. Remove the lens mount cap before installing a lens (sold separately). 8 Flange-back adjustment screw (FLANGE BACK ADJ.) 9 Flange-back lock screw (FLANGE BACK LOCK) F Camera installation bracket The bracket can be fixed at the top or bottom of the camera.
CONCERNING AUTO-IRIS LENSES DC type auto-iris lens A lens without amplifier circuit that operates only on a DC power source. In general, this type of lens is referred to as DC type coil lens or DC type non-amplifier lens. (Set the A.I. LENS switch to the DC position.
MOUNTING THE LENS Please use a DC type auto-iris lens (sold separately). Checking the lens mount Do not use a lens if length “ L ” is more than 7 mm. If not, that may damage the camera and prevent proper installation. 1 Remove the lens mount cap from the camera.
MOUNTING THE LENS Rewiring the lens cable in the lens iris plug 1 Prepare the lens cable. Cut the cable at the plug, then remove approx. 8 mm of the cable sheath and strip about 2 mm from ea ch wire.
CONNECTIONS Basic connection for monitoring or recording The peripheral devices (VCR, monitor, lens, etc.) and cables are sold separately. 1 Make the video signal connection between the camera and the monitor or time lapse VCR. 2 Connect DC connecting cord from the AC adaptor to the 12 V DC input terminal on the camera.
SETTINGS Control name Position a High speed electronic shutter switches (E.S.) All OFF: 1/50 sec b Electronic iris (EI)/Backlight compensation (BLC) switch OFF c Auto-iris lens switch (A.
SET TINGS Electronic iris function setting Use a manual or fixed iris lens and set the lens aperture to the shortest F stop. Set the EI/BLC switch to EI-ON position. Note: Please refer to the specifications for dynamic range of the electronic iris. CAUTION: • The e lec tron ic iris is su itable for n ormal in door us e.
SET TINGS Backlight compensation setting Use an auto-iris lens and set the EI/BLC switch to the BLC-ON position, to engage the backlight compensation function. Use an auto-iris lens. Set the EI/BLC switch to the BLC-ON position. If using a VIDEO type auto-iris lens • The ALC volume on the lens should be turned all the way to Av (Average).
SPECIFICATIONS Camera Scanning system : CCIR standard (625 TV lines, 25 frames/sec.) Interlace : PLL 2:1 interlace Image device : 1 /2 i n c h s o lid s ta te i ma ge de vi ce C CD Picture elements : .
SPECIFICATIONS Dimensions: mm Features and specifications are subject to change without prior notice or obligations. ACCESSORIES 1 C mount adaptor (5 mm).......................................................... 1 pc. The C mount adaptor must be used to be able to install a C mount lens on the camera.
1AC6P1P1978-- L72H2/XE2(0399NI) SANYO Electric Co, Ltd Printed in Japan L72H 2/XE2 GB 199 9, 3, 2.
An important point after buying a device Sanyo VCB-3572IRP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanyo VCB-3572IRP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanyo VCB-3572IRP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanyo VCB-3572IRP you will learn all the available features of the product, as well as information on its operation. The information that you get Sanyo VCB-3572IRP will certainly help you make a decision on the purchase.
If you already are a holder of Sanyo VCB-3572IRP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanyo VCB-3572IRP.
However, one of the most important roles played by the user manual is to help in solving problems with Sanyo VCB-3572IRP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanyo VCB-3572IRP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
