Instruction/ maintenance manual of the product PC-19R90 Sanyo
Go to page of 2
PC-19R90 (U.S.A.) VERSION ADV ANCE F G H Chassis No. G6J-19R902 NOTE: Match the Chassis No. on the unit’s back cover with the Chassis No. in the Service Manual. If the Original V ersion Service Manual Chassis No. does not match the unit’ s, additional Service Literature is required.
DIFFERENCES Model PC-19R90 (Chassis No. G6J-19R902) SAME AS MODEL A VM-1909S (Chassis No. G6E-1909S2) EXCEPT : May / 2000 / 2000 SMC Printed in U.
An important point after buying a device Sanyo PC-19R90 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanyo PC-19R90 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanyo PC-19R90 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanyo PC-19R90 you will learn all the available features of the product, as well as information on its operation. The information that you get Sanyo PC-19R90 will certainly help you make a decision on the purchase.
If you already are a holder of Sanyo PC-19R90, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanyo PC-19R90.
However, one of the most important roles played by the user manual is to help in solving problems with Sanyo PC-19R90. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanyo PC-19R90 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
