Instruction/ maintenance manual of the product M1 Sanyo
Go to page of 284
Qwest ® Ser vice www .qwest.com Copyright © 2007 Qwest Communications International, Inc . All rights reserved. No reproduction in whole or in part without prior written approval. Qwest is a trademark of Qwest Communications International Inc. Sprint is a trademark of Sprint Nextel.
T able of Contents Welcome to Qwest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ii Y our Phone’ s Menu . . . . . . . . . . . . . . . . . .
2C. Setting Y our Phone’ s Security . . . . . . . . . . . . . . . . . . . . . . .70 Accessing the Security Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71 Using Your Phone’ s Lock Feature . . . . . . . . . . . . . . . . . .
Assigning Speed Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97 Editing a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 Assigning an Image to a Contacts Entr y . . . . . . . .
2K. Using the Built-In Media Player . . . . . . . . . . . . . . . . . . . . .183 Y our Multimedia Channel Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184 Accessing Your Media Player’s Channel Listings . . . . . . . . . . . . . .
Section 4: Safety and Warranty Information . . . . . . . . . . .247 4A. Important Safety Information . . . . . . . . . . . . . . . . . . . . . . .248 General Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .249 Maintaining Safe Use of and Access to Y our Phone .
Welcome to Qwest ® This guide will familiarize you with wireless service and your new phone through simple, easy-to-follow instructions. It’ s all right here – from setting up your account passwords and voicemail to using the most advanced features of your new phone.
ii Introduction This Phone Guide introduces you to wireless service and all the features of your new phone. It’ s divided into four sections: ⽧ Section 1: Getting Started ⽧ Section 2: Using Y ou.
Y our Phone’ s Menu The following table outlines your phone’ s list menu structure. For more information about using your phone’ s menus, see “Navigating Through Phone Menus” on page 22.
iv 5: On Dem a nd 5: Voicem a il 1: Call V oicemail 2: Call: S peaker On 3: Detail s 4: Clear Co u nt 1: S en d Callback# 2: Delivery Receipt 3: S i g nat u re 4: Draft s Alert 1: M sgs an d Icon 2: I.
v * : T ools 1: Voice Services 1: Voice Recor d er 2: S creen Call 1: PictBri dg e2 : M a ss S tora g e 8 : More T ools 1: Alarm Clock 2: S top Watch 3: Co u nt d own 4: Worl d Clock 2: Bluetooth 3: C.
vi 5: Others 1: T one Len g th 2: S tart- u p T one 3: Power -off T one 4: V oice Prompt 5: Key Pre ss Echo 2: Displ a y 1: B a cklight 1: Main LCD 2: Key 3: Su b LCD 3: G reeting 2: Power S a ve Mode.
vii 2: Net G u a rd 3: Upd a te Profile 4: Re a dy Link 1: En a ble/Dis a ble 2: List Upd a te 3: Sounds 1: Rin g er T ype 3: Vibrate Pattern 2: Rin g er Vol u me 4: Alert s 4: Spe a kerphone 5: Def a.
viii 2: Picture M a il 1: Lock Pict u re s 2: Re s et Pict u re Mail 3: Er a se/Reset 1: Era s e Ph. Book 2: Era s e My Content 5: Era s e Voice T a g 6: Era s e Me ss a g e s 3: Era s e Pict u re s 4: Era s e V oice Data 7: Era s e Cal.
ix 9 : He a dset Mode 1: T u rbo B u tton 2: Earpiece 3: Rin g er S o u n d 11: N a vig a tion Keys 1: Left Navi g ation (Me d ia Player) 2: Ri g ht Navi g ation (On Deman d ) 3: Up Navi g ation ( S e.
.
Section 1 Getting Started.
2 Section 1A: Setting Up Service Section 1A Setting Up Ser vice In This Section ⽧ Getting Started (page 3) ⽧ Setting Up Y our Voicemail (page 4) ⽧ Account Passwords (page 5) ⽧ Getting Help (page 6) Setting up service on your new phone is quick and easy .
Section 1A: Setting Up Service 3 Getting Started Unlocking Y our Phone T o unlock your phone, follow these easy steps: 1. Press to turn the phone on. 2. Select Unlock (left softkey). 3. Enter your four -digit lock code. (For security purposes, the code is not visible as you type.
4 Section 1A: Setting Up Service Setting Up Y our V oicemail All unanswered calls to your phone are automatically transferred to your voicemail, even if your phone is in use or turned off. Therefore, you will want to set up your voicemail and personal greeting as soon as your phone is activated.
Section 1A: Setting Up Service 5 Account P asswords As a Qwest customer , you enjoy unlimited access to your personal account information, your voicemail account, and your Sprint Power Vision account. T o ensure that no one else has access to your information, you will need to create passwords to protect your privacy .
6 Section 1A: Setting Up Service Getting Help Visit www .qwest.com Y ou can go online to: 䢇 Review coverage maps. 䢇 Access your account information. 䢇 Find information and accessories for your phone. 䢇 And more. Reaching Qwest Wireless Customer Service Y ou can reach Qwest online or by phone: 䢇 Sign on to your account at www .
Section 2 Using Y our Phone.
8 Section 2A: Phone Basics Section 2A Phone Basics In This Section ⽧ Front View of Y our Phone (page 9) ⽧ Viewing the Display Screen (page 13) ⽧ Features of Y our Phone (page 16) ⽧ T urning Y .
Section 2A: Phone Basics 9 Front V iew of Y our Phone 18. Softkey (right) 21. Headset Jack 27. Flash 22. Su b LCD 3. Navigation Key 8. T ALK Key 9 . Side Volume Key 4. Softkey (left) 5. MENU/OK Key 6 . Camera Key 7. Ready Link/ Recorder Button 2. Main LCD (display) 12.
10 Section 2A: Phone Basics Key Functions 1. Earpiece lets you hear the caller and automated prompts. 2. Main LCD (display) displays all the information needed to operate your phone, such as the call status, the Contacts list, the date and time, and the signal and battery strength.
Section 2A: Phone Basics 11 13. Keypad lets you enter numbers, letters, and characters, and navigate within menus. Press and hold keys 2-9 for speed dialing. 14. END/POWER Key lets you turn the phone on or off, end a call, or return to standby mode. While in the main menu, it returns the phone to standby mode and cancels your input.
12 Section 2A: Phone Basics 24. External Control Key lets you access the Sprint Music Store or navigate through the media player menu and play music without opening the phone. This key can also be used when using the Camera and Voice Recorder functions.
Section 2A: Phone Basics 13 V iewing the Display Screen Y our phone’ s display screen provides a wealth of information about your phone’ s status and options. This list identifies the symbols you’ll see on your phone’ s display screen: shows your current signal strength.
14 Section 2A: Phone Basics indicates you have alarm clock or countdown notifications. indicates you have picture messages, voicemail messages, or text messages. indicates you have urgent messages. indicates you have two or more different types of missed calls, scheduled events, call alarms, or alarm clock notifications.
Section 2A: Phone Basics 15 indicates the Location feature of your phone is enabled. indicates the Location feature of your phone is disabled. indicates you have a new caller’ s message. indicates the Screen Call Auto setting is on. indicates your phone is in TTY mode.
16 Section 2A: Phone Basics F eatures of Y our Phone Congratulations on the purchase of your phone. The M1 by Sanyo is lightweight, easy-to-use, and reliable, and it also offers many significant features and service options.
Section 2A: Phone Basics 17 䢇 The external control key allows you to access the Sprint Music Store or navigate through the media player menu and play music without opening the phone (page 190). 䢇 The Automatic Speech Recognition (ASR) allows you to place calls by speaking to your phone (page 122).
18 Section 2A: Phone Basics T urning Y our Phone On and Off T urning Y our Phone On T o turn your phone on: 䊳 Press . Once your phone is on, it may display “Looking for service...,” which indicates that your phone is searching for a signal. When your phone finds a signal, it automatically enters standby mode – the phone’ s idle state.
Section 2A: Phone Basics 19 Using Y our Phone’ s Battery and Charger Battery Capacity Y our phone is equipped with a Lithium Ion (Li-Ion) battery . It allows you to recharge your battery before it is fully drained. The batter y provides up to 3.8 hours of continuous digital talk time.
20 Section 2A: Phone Basics Installing the Battery T o install the Li-Ion batter y: 䊳 T o install, insert the battery into the opening on the back of the phone and gently press down until the latch snaps into place. Removing the Batter y T o remove your batter y: 1.
Section 2A: Phone Basics 21 Charging the Battery Y our phone’ s Li-Ion ba ttery is rechargeable and should be charged as soon as possible so you can begin using your phone.
22 Section 2A: Phone Basics Navigating Through Phone Menus The navigation key on your phone allows you to scroll through menus quickly and easily . The scroll bar at the right of the menu keeps track of your position in the menu at all times. T o navigate through a menu, simply press the navigation key up or down.
Section 2A: Phone Basics 23 Backing Up Within a Menu T o go to the previous menu: 䊳 Press . T o return to standby mode: 䊳 Press . Displaying Y our Phone Number Just in case you forget your phone number , your phone can remind you. T o display your phone number: 䊳 Select > Settings > Phone Info > Phone#/User ID .
24 Section 2A: Phone Basics Making and Answering Calls Holding Y our Phone T o maximize performance, do not obstruct the upper back portion of your phone where the internal antenna is located while using the phone. Making Calls Placing a call from your wireless phone is as easy as making a call from any landline phone.
Section 2A: Phone Basics 25 Y ou can also place calls from your phone by speed dialing numbers from your Contacts (page 37), and by using your Call History listings (page 88), Automatic Speech Recognition (page 12 2 ), and Voice-Activated Dialing (page 120).
26 Section 2A: Phone Basics Answering Calls T o answer an incoming call with the phone open: 1. Make sure your phone is on. (If your phone is off, incoming calls go to voicemail.) 2. Press to answer an incoming call. (Depending on your phone’ s settings, you may also answer incoming calls by opening the phone or by pressing any number key .
Section 2A: Phone Basics 27 Y our phone notifies you of incoming calls in the following ways: 䢇 The phone rings or vibrates. 䢇 The indicator light flashes. 䢇 The backlight illuminates. 䢇 The screen displays an incoming call message. If the incoming call is from a number stored in your Contacts, the entry’ s name is displayed.
28 Section 2A: Phone Basics Answering a Roam Call With Call Guard Enabled Call Guard is an option that helps you manage your roaming charges when making or receiving calls while outside the home network. Please see Section 2D: Controlling Y our Roaming Experience for more information about roaming.
Section 2A: Phone Basics 29 Calling Emergency Numbers Y ou can place calls to 911 (dial ), even if your phone is locked or your account is restricted. During an emergency call select Options (right softkey) to display your options. T o select an option, highlight it and press .
30 Section 2A: Phone Basics T o select Emergency mode options: 1. Press to end a 911 call. 2. Select Options (right softkey). 䡲 Call 911 to call 911. 䡲 Call 911: Speaker to call 911 in speakerphone mode. 䡲 Exit Emergency to exit Emergency mode. 3.
Section 2A: Phone Basics 31 In-Call Options Selecting Options (right softkey) during a call displays a list of features you may use during the call. T o select an option, highlight the option and press .
32 Section 2A: Phone Basics 䢇 T ools to access the T ools menu. (See “Using the Phone’ s Calendar and T ools” on page 101.) 䢇 Settings to access the Settings menu. (See “Controlling Y our Phone’s Settings” on page 43.) During a call, both the left softkey button and the Side Call key ( ) function as the Mute button.
Section 2A: Phone Basics 33 Saving a Phone Number Y our phone can store up to 700 phone numbers in up to 500 Contacts entries. Each entry’ s name can contain 32 characters. Y our phone automatically sorts the Contacts entries alphabetically . (For more information, see Section 2F: Using Contacts on page 90.
34 Section 2A: Phone Basics Finding a Phone Number Y ou can search Contacts entries for phone numbers that contain a specific string of numbers. T o find a phone number: 1. Enter the last four or more digits of the number in standby mode. (The more numbers you enter , the more specific the search becomes.
Section 2A: Phone Basics 35 T o dial or save phone numbers with pauses: 1. Enter the phone number . 2. Select Options (right softkey) and select either Hard Pause or 2-Sec. Pause . (Hard pauses are displayed as a “P” and two-second pauses as a “T .
36 Section 2A: Phone Basics Plus (+) Code Dialing When placing international calls, you can use Plus Code Dialing to automatically enter the international access code for your location (for example, 011 for international calls made from the United States).
Section 2A: Phone Basics 37 Using Speed Dialing Y ou can store up to eight numbers in your phone’ s speed dial memor y to make contacting friends and family as easy as pressing a button. With this feature, you can dial speed dial entries using one keypress for locations 2–9.
38 Section 2A: Phone Basics Entering T ext Selecting a Character Input Mode Y our phone provides convenient ways to enter words, letters, punctuation, and numbers whenever you are prompted to enter text (for example, when adding a Contacts entry or when using SMS T ext Messaging).
Section 2A: Phone Basics 39 䡲 Paste List to paste copied or cut text (if applicable). 䡲 NUMBER to enter numbers. 䡲 Signature to enter your signature. (See page 59.) 䡲 Select Language to select the language (English or Spanish). 䡲 Erase All to erase all text (if applicable).
40 Section 2A: Phone Basics Entering Characters Using T9 T ext Input T9 T ext Input lets you enter text in your phone by pressing keys just once per letter . (T o select the T9 Word mode when entering text, see “Selecting a Character Input Mode” on page 38.
Section 2A: Phone Basics 41 Customizing the T9 Settings T o customize the T9 Settings: 1. Select > Settings > Others > T ext Entr y > T9 Settings . – or – Select the T ext Options input mode, and then select T9 Settings . (See “Selecting a Character Input Mode” on page 38.
42 Section 2A: Phone Basics Entering Characters Using Alphabet Mode T o enter characters using Alphabet Mode (multi-tap key entr y): 1. Select the Alphabet mode. (See “Selecting a Character Input Mode” on page 38.) 2. Press the corresponding keys repeatedly until the desired letter appears.
Section 2B: Controlling Y our Phone’s Settings 43 Section 2B Controlling Y our Phone’ s Settings In This Section ⽧ Sound Settings (page 44) ⽧ Display Settings (page 50) ⽧ Location Settings (.
44 Section 2B: Controlling Y our Phone’s Settings Sound Settings Ringer T ypes Ringer types help you identify incoming calls and messages. Y ou can assign ringer types to individual Contacts entries, types of calls, and types of messages. 䢇 Preprogrammed Ringers include a variety of standard ringer types and familiar music.
Section 2B: Controlling Y our Phone’s Settings 45 Selecting Ringer T ypes for Ready Link Calls T o select a ringer type for Ready Link calls: 1. Select > Settings > Sounds > Ringer T ype > Ready Link . 2. Select Ready Link Calls , R-Link Missed , or R-Link Floor T one .
46 Section 2B: Controlling Y our Phone’s Settings Selecting a V ibrate Pattern With this feature, you can select a vibrate pattern for incoming calls, messages, and alarms. T o select a vibrate pattern: 1. Select > Settings > Sounds > Vibrate P attern .
Section 2B: Controlling Y our Phone’s Settings 47 Setting a Start-up/P ower -off T one T o set a start-up/power-off tone: 1. Select > Settings > Sounds > Others . 2. Select Start-up T one or P ower-off T one . 3. Scroll to select a tone and press .
48 Section 2B: Controlling Y our Phone’s Settings Adjusting the Phone’ s V olume Settings Y ou can adjust your phone’ s volume settings to suit your needs and your environment. T o adjust the ringer volume: 1. Select > Settings > Sounds > Volume > Ringer .
Section 2B: Controlling Y our Phone’s Settings 49 Adjusting the Phone’ s Receiver Volume T o adjust the receiver volume: 1. Select > Settings > Sounds > Volume > Receiver . 2. Select either Earpiece or Speaker . 3. Using the navigation key , choose a volume level, and select Done (left softkey).
50 Section 2B: Controlling Y our Phone’s Settings Silence All There may be times when you need to silence your phone entirely . The phone’ s Silence All option allows you to mute all sounds without turning your phone off. T o activate Silence All: 䊳 With the phone open, press and hold the volume key down in standby mode.
Section 2B: Controlling Y our Phone’s Settings 51 Changing the Backlight Time Length The backlight setting lets you select how long the display screen and keypad remain backlit after any keypress is made. T o change the backlight setting: 1. Select > Settings > Display > Backlight .
52 Section 2B: Controlling Y our Phone’s Settings Changing the Display for Incoming Calls Y ou can set the color or downloaded image to be shown on the Incoming Calls display . T o change the incoming calls display: 1. Select > Settings > Display > Incoming Calls .
Section 2B: Controlling Y our Phone’s Settings 53 P ower Save Mode This feature helps conserve your batter y power by setting the Main LCD and Sub LCD backlights to “Always Off, ” and by setting the Main LCD sleep mode to “after 30 sec.” and the Sub LCD sleep mode to “after 5 sec.
54 Section 2B: Controlling Y our Phone’s Settings Changing the Phone’ s Menu Style Y our phone allows you to choose how the menu is displayed on the screen. T o select the display’s menu style: 䊳 Press to access the main menu, and then select Options (right softkey) > Change View .
Section 2B: Controlling Y our Phone’s Settings 55 Changing the T ext Font Size This setting allows you to adjust the display appearance when entering text (for example, when writing a message or when adding a Contacts entry) or when viewing a message.
56 Section 2B: Controlling Y our Phone’s Settings Sleep Mode This feature helps conserve your batter y power by restricting the display . T o set this feature: 1. Select > Settings > Display > Others > Sleep Mode . 2. Select Main LCD or Sub LCD .
Section 2B: Controlling Y our Phone’s Settings 57 Messaging Settings Staying connected to your friends and family has never been easier . With your phone’ s advanced messaging capabilities, you can send and receive many different kinds of text messages without placing a voice call.
58 Section 2B: Controlling Y our Phone’s Settings Managing Preset Messages Y our phone is loaded with twenty preset messages, in English and in Spanish, to help make sending text messages faster and easier .
Section 2B: Controlling Y our Phone’s Settings 59 Setting a Callback Number With this feature, you can notify your recipients of your callback number with a text message. T o set the callback number: 1. Select > Settings > Messaging > T ext > Send Callback# .
60 Section 2B: Controlling Y our Phone’s Settings Setting the Delivery Receipt Y ou can set to receive a delivery receipt message confirming that your message was successfully delivered to your recipient. T o set the deliver y receipt: 1. Select > Settings > Messaging > T ext > Deliver y Receipt .
Section 2B: Controlling Y our Phone’s Settings 61 TTY Use A TTY (also known as a TDD or T ext T elephone) is a telecommunications device that allows people who are deaf, hard of hearing, or who have speech or language disabilities, to communicate by telephone.
62 Section 2B: Controlling Y our Phone’s Settings T o turn TTY Mode on or off: 1. Select > Settings > Others > TTY . (An informational message will be displayed.) 2. Read the disclaimer and select OK (left softkey). 3. Select Enable and press to turn TTY mode on.
Section 2B: Controlling Y our Phone’s Settings 63 Phone Setup Options My Favorites Y our phone offers you the option of assigning a shortcut key to a favorite or often-used function. Selecting F avorites (left softkey) in standby mode will launch your personally designated shortcut.
64 Section 2B: Controlling Y our Phone’s Settings Auto-Answer Mode Y ou may set your phone to automatically pick up incoming calls in speakerphone mode or when connected to an optional hands-free device. T o set Auto-Answer mode: 1. Select > Settings > Others > Auto Answer .
Section 2B: Controlling Y our Phone’s Settings 65 Setting the Open/Close Flip Option This feature enables you to answer an incoming call by opening the phone or to end a call by closing the phone. T o activate the Open Flip feature: 1. Select > Settings > Others > Open/Close Flip .
Setting P ower On to Alert Power On to Alert helps prevent unintentional or accidental power -on of your phone’ s alarm settings while your phone is turned off (default setting is off). This feature applies only to Event Alerts, Call Alarm, and Alarm Clock.
Section 2B: Controlling Y our Phone’s Settings 67 Setting Navigation Key Shortcuts Y ou can use the navigation key as a shortcut to access specific menu items directly from standby mode. With this feature, you can reassign the default shortcut keys to the menu items you choose.
68 Section 2B: Controlling Y our Phone’s Settings 䡲 Auto-Complete to turn auto-completion on or off. 䡲 Help to see the T9 instruction page. Setting Abbreviated Dialing Abbreviated Dialing allows you to dial a number using the last four or five digits of the phone number .
Section 2B: Controlling Y our Phone’s Settings 69 Setting Headset Mode This feature allows you hands-free phone use. Set the headset mode to Voice Call or Ready Link call and press the T urbo Button (the operation button) on the headset to activate useful functions.
70 Section 2C: Setting Y our Phone’s Security Section 2C Setting Y our Phone’ s Security In This Section ⽧ Accessing the Security Menu (page 71) ⽧ Using Y our Phone’s Lock F eature (page 71).
Section 2C: Setting Y our Phone’s Security 71 Accessing the Security Menu All of your phone’ s security settings are available through the Security menu. Y ou must enter your lock code to view the Security menu. T o access the Security menu: 1. Select > Settings > Security .
72 Section 2C: Setting Y our Phone’s Security Changing the Lock Code T o change your lock code: 1. Select > Settings > Security , and then enter your lock code. (The Security menu is displayed.) 2. Select Others > Change Lock , and then enter and re-enter your new lock code.
Section 2C: Setting Y our Phone’s Security 73 Lock Services With this feature, you can choose to restrict access to Sprint Power Vision services, incoming and outgoing voice calls, and Ready Link calls or settings. T o activate lock services: 1. From the Security Menu, select Others > Lock Services .
74 Section 2C: Setting Y our Phone’s Security Using Special Numbers Special numbers are important numbers that you have designated as being “always available.” Y ou can call and receive calls from special numbers even if your phone is locked. Y ou can save up to three special numbers in addition to your Contacts entries.
Section 2C: Setting Y our Phone’s Security 75 Erasing Phone Content Y ou can quickly and easily erase all the content that you have created in your phone. T o erase phone content: 1. Select > Settings > Security , and then enter your lock code.
76 Section 2C: Setting Y our Phone’s Security Resetting the Browser This option resets your Web browser’ s histor y , bookmarks, cookies, auto- complete text, and URLs. T o reset the browser: 1. Select > Settings > Security , and then enter your lock code.
Section 2C: Setting Y our Phone’s Security 77 Resetting Y our Phone Resetting the phone resets all settings and erases all data on your phone (except data saved in the File Manager). T o reset your phone: 1. Select > Settings > Security , and then enter your lock code.
78 Section 2C: Setting Y our Phone’s Security Resetting Def ault Settings Resetting the default settings restores all the factory defaults, including the ringer types and display settings. The Contacts, Call History , Calendar , and Messaging are not affected.
Section 2C: Setting Y our Phone’s Security 79 Security F eatures for Sprint Power V ision Enabling and Disabling Sprint P ower Vision Services Y ou can disable Sprint Power Vision services without turning off your phone; however , you will not have access to all Sprint Power Vision services, including Web and messaging.
80 Section 2D: Controlling Y our Roaming Experience Section 2D Controlling Y our Roaming Experience In This Section ⽧ Understanding Roaming (page 81) ⽧ Setting Y our Phone’s Roam Mode (page 82) ⽧ Using Call Guard (page 83) ⽧ Using Data Roam Guard (page 84) Roaming is the ability to make or receive calls when you’re off the home network.
Section 2D: Controlling Y our Roaming Experience 81 Understanding Roaming Recognizing the Roaming Icon on the Display Screen Y our phone’ s display screen always lets you know when you’re off the home network. Any time you are roaming, the phone displays the roaming icon ( ).
82 Section 2D: Controlling Y our Roaming Experience Setting Y our Phone’ s Roam Mode Y our phone allows you to control your roaming capabilities. By using the Roaming menu option, you can determine which signals your phone accepts. Set Mode Choose from three different settings on your phone to control your roaming experience.
Section 2D: Controlling Y our Roaming Experience 83 Using Call Guard Y our phone has two ways of alerting you when you are roaming off the home network: the onscreen roaming icon and Call Guard. Call Guard makes it easy to manage your roaming charges by requiring an extra step before you can place or answer a roaming call.
84 Section 2D: Controlling Y our Roaming Experience Using Data Roam Guard Depending on service availability and roaming agreements, your phone may be able to access data services while roaming on certain digital systems. You can set your phone to alert you when you are roaming off the home network and try to use data ser vices such as messaging.
Section 2E: Managing Call History 85 Section 2E Managing Call Histor y In This Section ⽧ Viewing History (page 86) ⽧ Call History Options (page 87) ⽧ Making a Call From Call History (page 88) .
86 Section 2E: Managing Call History V iewing Histor y Y ou’ll find the Call History feature very helpful. It is a list of the last 20 phone numbers (or Contacts entries) for calls you placed, accepted, or missed. Call History makes redialing a number fast and easy .
Section 2E: Managing Call History 87 Call History Options For additional information about and options for a particular call, highlight a Call History entr y and press . This feature displays the date and time of the call, the phone number (if available), and the caller’ s name (if the number is already in your Contacts).
88 Section 2E: Managing Call History Making a Call From Call History T o place a call from Call Histor y: 1. Select > Call Histor y , and then select Outgoing , Incoming , Missed , or Recent Calls . 2. Use your navigation key to select a Call History entr y and press .
Section 2E: Managing Call History 89 Prepending a Phone Number From Call History If you need to make a call from Call History and you happen to be outside your local area code, you can add the appropriate prefix by prepending the number . T o prepend a phone number from Call Histor y: 1.
90 Section 2F: Using Contacts Section 2F Using Contacts In This Section ⽧ Adding a New Contacts Entry (page 91) ⽧ Assigning a Group Entry (page 92) ⽧ Finding Contacts Entries (page 93) ⽧ Conta.
Section 2F: Using Contacts 91 Adding a New Contacts Entry Y our phone can store up to 500 Contacts entries. Contacts entries can store up to a total of 700 phone numbers, and each entry’ s name can contain 32 characters. T o add a new entr y: 1. Select > Contacts > Find/Add Entr y > Add Contact .
92 Section 2F: Using Contacts Assigning a Group Entry Y our phone can create up to 20 separate group lists. By assigning a contact to a group, you can search easily using a user - defined group name. T o assign a Contact to a group: 1. Select > Contacts > Group .
Section 2F: Using Contacts 93 Finding Contacts Entries There are several ways to display your Contacts entries: by name, by speed dial number , by group, and by voice dial tags. Follow the steps outlined in the sections below to display entries from the Contacts menu.
94 Section 2F: Using Contacts Finding Speed Dial Numbers T o find phone numbers you have stored in speed dial locations: 䊳 Select > Contacts > Speed Dial #s . See “Using Speed Dialing” on page 37 for how to use speed dialing. Finding Group Entries T o find entries designated as part of a group: 1.
Section 2F: Using Contacts 95 Contacts Entry Options T o access a Contacts entr y’ s options, highlight an entry and press . Then select a phone number and select Options (right softkey). T o select an option, highlight it and press . 䢇 Edit to edit the selected entry .
96 Section 2F: Using Contacts Adding a Phone Number to a Contacts Entry T o add a phone number to an entr y: 1. Display a Contacts entry . (See “Finding Contacts Entries” on page 93.) 2. Scroll to the entry you wish to add a phone number to and press .
Section 2F: Using Contacts 97 Assigning Speed Dial Numbers With this feature you can dial Contacts directory entries with one keypress for locations 2–9. (For details on how to make calls using speed dial numbers, see “Using Speed Dialing” on page 37.
98 Section 2F: Using Contacts Editing a Contacts Entry T o make changes to an entr y: 1. Display a Contacts entry . 2. Select the entry you wish to edit and press . 3. Select a phone number , and then select Options (right softkey) > Edit ; or if you are selecting an item other than the phone number , select Edit (right softkey).
Section 2F: Using Contacts 99 Selecting a Ringer T ype for an Entry Y ou can assign a ringer type to a Contacts entry so you can identify the caller by the ringer type. (See “Ringer T ypes” on page 44.) T o select a ringer type for an entr y: 1. Display a Contacts entry .
100 Section 2F: Using Contacts Secret Contacts Entries Y ou can hide an entry’ s phone number(s) and require your lock code to edit the entry by making it secret. The entr y name is still displayed, but the entry’ s information is replaced with “<Secret>”.
Section 2G: Using the Phone’ s Calendar and T ools 101 Section 2G Using the Phone’ s Calendar and T ools In This Section ⽧ Using Y our Phone’s Calendar (page 102) ⽧ Using Y our Phone’s T o.
102 Section 2G: Using the Phone’ s Calendar and T ools Using Y our Phone’ s Calendar Displaying Y our Calendar T o display your calendar: 䊳 Select > T ools > Calendar . Changing the Calendar Settings This setting allows you to change the default settings for your phone’ s calendar .
Section 2G: Using the Phone’ s Calendar and T ools 103 Adding an Event to the Calendar Y our Calendar helps organize your time and reminds you of important events. Y ou can schedule up to 200 events. T o add an event: 1. Select > T ools > Calendar .
104 Section 2G: Using the Phone’ s Calendar and T ools Event Alerts There are several ways your phone alerts you to scheduled events: 䢇 By playing the assigned ringer type.
Section 2G: Using the Phone’ s Calendar and T ools 105 Event List Options While you are displaying the day’ s events list, select Options (right softkey) to access the following options: 䢇 Add Schedule to add an event to the calendar . 䢇 Add Call Alarm to add a call alarm to the calendar .
106 Section 2G: Using the Phone’ s Calendar and T ools Going to a Specified Date T o use the Calendar menu to get to a specified date: 1. Select > T ools > Calendar > Options (right softkey) > Go to Date . 2. Enter the date you wish to go to using the navigation key and/or the keypad and press .
Section 2G: Using the Phone’ s Calendar and T ools 107 Purging Events T o delete events scheduled before a specific time and date: 䊳 Select > T ools > Calendar > Options (right softkey) > Erase Memory > Erase Old > Y es . Purging All Events T o delete all scheduled events: 1.
108 Section 2G: Using the Phone’ s Calendar and T ools Adding a Call Alarm to the Calendar Y ou can set call alarms to notify you when you need to place a call. The call alarm will let you know when and to whom to place a scheduled call. Y ou can set up to 15 call alarms.
Section 2G: Using the Phone’ s Calendar and T ools 109 Adding T o Do List Items Y our phone can store and manage up to 40 T o Do List items. T o add an item to your T o Do List: 1. From the Calendar display , select Options (right softkey). 2. Press the navigation key left or right to select Add T o Do , and then press .
110 Section 2G: Using the Phone’ s Calendar and T ools Using Y our Phone’ s T ools In addition to helping you be more efficient and organized, your phone offers useful and entertaining tools. Using the Alarm Clock Y our phone comes with a built-in alarm clock with multiple alarm capabilities.
Section 2G: Using the Phone’ s Calendar and T ools 111 Using the Stopwatch T o start the stopwatch: 䊳 Select > T ools > More T ools > Stop Watch . 䡲 Select Start (left softkey) to start the stopwatch. 䡲 Select Stop (left softkey) to stop the stopwatch.
112 Section 2G: Using the Phone’ s Calendar and T ools Using the Countdown Timer This feature allows you to use the countdown timer with alarm capabilities. Y ou can set up to five timers. T o use the countdown timer: 1. Select > T ools > More T ools > Countdown .
Section 2G: Using the Phone’ s Calendar and T ools 113 Using the Calculator Y our phone comes with a built-in calculator . T o use the calculator: 1.
114 Section 2G: Using the Phone’ s Calendar and T ools Connecting Y our Phone to Y our PC Before using your phone’ s mass storage capabilities, you need to prepare your phone’ s data services to synchronize with your desktop or laptop computer .
Section 2G: Using the Phone’ s Calendar and T ools 115 File Manager File Manager allows you to manage your files such as pictures, videos, music and applications stored in the phone’ s memory . With this feature, you can search, move, erase, import, rename and open files more easily .
116 Section 2G: Using the Phone’ s Calendar and T ools Opening Files in the File Manager T o open files in the file manager: 1. Select > T ools > File Manager . 2. Select your desired folder and press . 3. Use your navigation key to select an item you wish to open.
Section 2G: Using the Phone’ s Calendar and T ools 117 Sorting the Folder Contents T o sort the folder contents: 1. Select > T ools > File Manager . 2. Select the folder that includes the content you want to sort and press . 3. Select Options (right softkey) > Sort by .
118 Section 2G: Using the Phone’ s Calendar and T ools P ersonal Information Management Displaying Y our User Address T o display the phone’s current user address: 䊳 Select > Settings > Phone Info > Phone#/User ID . Finding Icon Definitions T o view an explanation of icons that appear on the display: 1.
Section 2H: Using Y our Phone’s V oice Services 119 Section 2H Using Y our Phone’ s Voice Services In This Section ⽧ Using Voice-Activ ated Dialing (page 120) ⽧ Using Automatic Speech Recognit.
Using V oice-Activated Dialing With your M1 from Sanyo, you can use a voice dial tag to automatically dial a phone number in your Contacts. (A voice dial tag is a command you record and use to place calls without using the keypad.) Y our phone can store up to 30 voice dial tags.
Voice Services 5. Respond to the prompt by repeating the name after the beep. (The display shows “Voice T ag Recorded.”) 䡲 If you set a voice tag, the icon is shown next to the phone number on the Contacts list. Reviewing V oice Dial T ags T o review voice dial tags: 1.
Using Automatic Speech Recognition Y our phone is equipped with an Automatic Speech Recognition (ASR) feature. This feature allows you to make calls or use the phone’ s functions by simply using your voice. All you have to do is to talk into the phone, and the phone will recognize your voice and complete tasks by itself.
Voice Services Making a V oice Call by Using ASR With ASR, you can make a voice call by speaking a name, phone number , or using a voice tag. T o make a voice call by speaking a name: 1. Press to activate the Command menu. 2. Say “ Call ” to your phone.
T o make a call by speaking a phone number: 1. Press to activate the Command menu. 2. Say “ Dial Number ” to your phone. 3. Say the phone number you wish to dial, one digit at a time. 4. The phone automatically places the call if it recognizes your voice.
Voice Services Making a Call Using a V oice T ag With a voice tag you record, your phone will automatically dial a phone number . (T o create a voice tag, see “Programming Voice Dial T ags” on page 120.) T o make a call by using a voice tag: 1. Press to activate the Command menu.
Using Digit T raining This feature allows you to train the phone to recognize your voice when speaking a phone number . Y ou can get better recognition accuracy by programming your intonation pattern into your phone. T o program Digit T raining: 1. Press to activate the Command menu.
Voice Services T o deactivate Digit T raining: 1. Press to activate the Command menu. 2. Say “ Digit T raining .” 3. Say “ Off ” or select Off (right softkey) to deactivate the existing data. (A voice prompt will announce the deactivation of digit training.
Making a Ready Link Call by Using ASR Y ou can place a Ready Link call by using automatic speech recognition from your Ready Link List. T o make a Ready Link Call, your phone’ s Ready Link mode must be set to Enable . (See “Setting Ready Link Mode” on page 163 for details.
Voice Services Using the V oice Recorder With this feature, you can easily record meetings, lectures, or even brief memos to remind you of important events, phone numbers, or grocery list items. Recording V oice Memos T o record a voice memo: 1. Select > T ools > Voice Services > Voice Recorder > Record or Record:Speaker .
T o record a voice memo with the phone closed: 1. When the phone is closed, press the side camera key to activate the launch menu. 2. Press the external control key up or down to select Voice Recorder , and press . 3. Select Record:Speaker and and press .
Voice Services Setting the Recording Guard With this feature, you can record voice memos without interruption by incoming calls. T o set the recording guard: 1. Select > T ools > Voice Services > Voice Recorder . 2. Highlight Record or Record:Speaker , and then select RecGuard (right softkey).
Erasing V oice Memos T o erase an individual voice memo: 1. Select > T ools > Voice Services > Voice Recorder > Play or Play:Speaker > Voice Data . 2. Select the memo you want to erase and select Options (right softkey) > Erase > Y es .
Voice Services Reviewing Call Memos T o play the call memos you have recorded: 1. Select > T ools > Voice Services > Voice Recorder > Play or Play:Speaker > Call Memo . 2. Select a call memo from the list or select All if you want to play all call memos continuously .
Setting Up Screen Call This feature enables you to screen incoming calls by using a recorded announcement, either one that is prerecorded or one that you have recorded.
Voice Services Recording Y our Name for a Prerecorded Announcement Y ou can use a prerecorded announcement with or without your name. If you record your name, your phone adds your name to the prerecorded message to announce that you are not available to answer calls.
Reviewing an Announcement T o review an announcement: 1. Select > T ools > Voice Services > Screen Call > Announcement . 2. Select Pre-Recorded or Custom , and select Edit (right softkey) > Play or Play:Speaker . Erasing an Announcement T o erase an announcement: 1.
Camera Section 2I Using the Built-in Camera In This Section ⽧ T aking Pictures (page 138) ⽧ Using the Settings & Info Menu (page 145) ⽧ Recording Videos (page 147) ⽧ Storing Pictures and V.
T aking Pictures T aking pictures with your phone’ s built-in camera is as simple as choosing a subject, pointing the lens, and pressing a button. Y ou can activate the phone’ s camera mode whether the phone is open or closed. T o take a picture with the phone open: 1.
Camera 䡲 Print to print an image by using PictBridge or by using Bluetooth. 䡲 Upload to upload the picture you just took to the Sprint PCS Picture Mail Web site ( http://pictures.qwest.com ). Depending on your settings, you may be prompted to accept a data connection.
Creating Y our Sprint PCS Picture Mail Password The first time you use any of the picture management options involving the Sprint PCS Picture Mail Web site, you will need to establish a Sprint PCS Picture Mail password through your phone. This password will also allow you to sign in to the Sprint PCS Picture Mail Web site at http://pictures.
Camera Camera Mode Options When the phone is open and in camera mode, select Options (right softkey) to display additional camera options: 䢇 Picture Mode to select a picture mode from Normal , Beach/Snow , Scenery , Mirror Image , Night/Dark , or Self Portrait .
Setting the Flash T o activate the flash: 1. From camera mode, select Options (right softkey) > Flash . 2. Select one of the following options and press : 䡲 Off to deactivate the flash. 䡲 On This Shot to activate the flash for one shot. 䡲 On Always to activate the flash for all pictures.
Camera T aking Multiple Shots This feature allows you to take up to nine continuous shots in sequence. When you take multiple shots, the icon will be displayed in the viewfinder . T o take multiple shots: 1. From camera mode, select Options (right softkey) > Fun T ools > Multiple Shots .
Setting Autofocus With this feature, you can adjust the focus automatically depending on the distance of the subject from the camera lens. By default, the autofocus is set to on. T o set autofocus: 1. From camera mode, select Options (right softkey) > Auto Focus .
Camera Selecting Camera Settings T o select your camera settings: 1. From camera mode, select Options (right softkey) > Camera Settings . 2. Select one of the following options and press : 䡲 Resolution to select a picture’ s file size ( 2M-1200x1600 , 1.
Camera Icon Indication Function Fla s h Pict u re Mo d e White Balance Contra s t To us e a fla s h every time yo u take a pict u re. To us e the a u to fla s h f u nction. U s e thi s s ettin g for su nny weather . U s e thi s s ettin g for clo ud y weather .
Camera Recording V ideos In addition to taking pictures, you can also record, view , and send videos to your friends and family with your phone’ s built-in video camera. T o record a video: 1. Select > Pictures > Camcorder to activate video mode.
T o take a video with the phone closed: 1. Press the side camera key to activate the launch menu. 2. Using the Side Volume key or external control key , select Camcorder . 3. Point the camera lens at your subject. (Y ou can check the video framing through the Sub LCD.
Camera 䢇 Camera Mode to switch to camera mode (if applicable). 䢇 Key Guidance to indicate the key functions in video mode. 䢇 My Favorite Settings to select your favorite setting. Selecting Camcorder Settings T o select your camcorder settings: 1.
Video Icon Indication Storing Pictures and V ideos Y our phone’ s picture and video storage area is called My Albums . There are two types of storage areas for your pictures and videos that can be used separately according to your needs: 䢇 In Phone (see page 151) 䢇 Online Albums (see page 157) Function For good video resolution.
Camera In Phone Folder The storage area of your phone is called the In Phone folder and it can store up to 1000 images. From the In Phone folder , you can view pictures and videos saved in your phone, send them to the Sprint PCS Picture Mail Web site ( http://pictures.
䢇 Media Filter to filter only pictures, only videos, or to display all media files. 䢇 Album List to display the album list. 䢇 Camera Mode to activate camera mode. 䢇 Camcorder Mode to activate video mode. Assigned Media Folder When you assign a picture or video, it will automatically be saved in the Assigned Media folder .
Camera Sending Sprint PCS Picture Mail Once you’ve taken a picture or video, you can use the messaging capabilities of your phone to instantly share your picture or video with family and friends. Y ou can send pictures or videos to up to 25 people at a time using their email addresses or their wireless phone numbers.
5. Select Next (left softkey) when you have finished adding recipients. (Y ou may include up to 25 recipients per message.) 6. If you wish to include a subject, scroll to Subject and enter your subject using the keypad.
Camera Sending Pictures and V ideos From Messaging Y ou can also send Sprint PCS Picture Mail from your phone’ s Messaging menu. T o send pictures and videos from the Messaging menu: 1. Select > Messaging > Send Message > Picture Mail . 2. Select Contacts , Phone# , or Email to select or enter recipients.
Managing Sprint PCS Picture Mail Using the Sprint PCS Picture Mail Web Site Once you have uploaded pictures and videos from your phone to your online Sprint PCS Picture Mail account at http://pictures.qwest.com (see “Uploading Pictures and Videos” on page 157), you can use your personal computer to manage your pictures.
Camera Managing Online Pictures and V ideos From Y our Phone Y ou can use your phone to manage, edit, or share pictures and videos you have uploaded to the Sprint PCS Picture Mail Web site at http://pictures.qwest.com . (See “Uploading Pictures and Videos” below for information about uploading.
Downloading Y our Online Pictures and Videos From your online Sprint PCS Picture Mail albums display at http://pictures.qwest.com , you can select pictures and videos to download to your phone’ s In Phone folder . T o download pictures and videos from the Sprint PCS Picture Mail Web site: 1.
Camera 䡲 Details/Edit to edit or display details relating to your pictures or videos. 䡲 Media Filter to filter only pictures or only videos, or to display all media files. 䡲 Album List to display the album list. T o access your Online Albums options from your phone: 1.
Printing Pictures Directly From Y our Phone Y our phone is PictBridge compatible, allowing you to print directly from your phone without connecting to a computer . Simply connect your phone to a PictBridge-enabled printer and enjoy printing your photos.
Camera PictBridge Error Messages: From time to time you may encounter printing problems. Any printer error messages will be displayed on your phone, informing you of the specific problems encountered. Please refer to the user’ s guide that came with your printer for descriptions, explanations, and possible resolutions for any error messages.
Section 2J Using Ready Link In This Section ⽧ Getting Started With Ready Link (page 163) ⽧ Making and Receiving a Ready Link Call (page 165) ⽧ Adding and Editing Ready Link Contacts (page 172) .
Ready Link Getting Started With Ready Link Ready Link allows you to enjoy quick, two-way , “walkie-talkie-style” communication with your friends, family , and coworkers. Y ou can make one- to-one or one-to-many calls (up to five others on the same call) to any other Ready Link user , anywhere on the home network.
Preparing Y our Phone for Ready Link Ser vice Every time you turn on your phone, your phone will identify itself and make itself available to the Ready Link network. When the Ready Link icon ( ) is displayed, your phone is ready to make and receive Ready Link calls.
Ready Link Making and Receiving a Ready Link Call Displaying the Ready Link List 䊳 From standby mode, press the Ready Link/Recorder button on the side of your phone ( ) to access the Ready Link List. Selecting a Contacts List When your phone displays a Ready Link List, the left softkey is labeled Go to .
Making a Ready Link Call (One-to-One Call) Y ou can place a one-to-one Ready Link call by entering a Ready Link number or by selecting a contact from the Ready Link List.
Ready Link 5. When you are finished, press . Making a Ready Link Call (Group Call) Y ou can make a Ready Link call to all members in a Group entry that you have in your Ready Link List. Y ou can communicate with up to five members at a time. T o place a Ready Link Group call: 1.
Making a Ready Link Call by Entering a Number T o place a Ready Link call by entering a number: 1. From standby mode, enter the Ready Link number you want to dial. 2. Press to place the Ready Link call. Continue holding to take the floor and speak. 䡲 The contact’ s name is displayed if there is a matched number in your Ready Link List.
Ready Link Missed Call Notification for Ready Link Calls When an incoming Ready Link call is not answered, the Missed Call Notification is displayed. T o call the last Missed Ready Link call: 䊳 Simply press and hold while the Missed Call Notification is displayed.
Receiving a Ready Link Call T o receive a Ready Link call: 1. Make sure your phone’ s Ready Link mode is enabled. (See “Setting Ready Link Mode” on page 163.) 2. When you receive a Ready Link call from a contact, “R-Link Call,” the contact’ s name, and the Ready Link number are displayed.
Ready Link Ready Link Options When you use Ready Link, several user options are available by selecting Options (right softkey). T o select an option, highlight it and press . 䢇 Edit to edit a Ready Link number or name. (See “Editing a Contact in Y our Personal List” on page 176.
Adding and Editing Ready Link Contacts Copying an Entry to Y our Personal List or P ersonal Group List Y ou can copy an entry to your Personal Lists from several different sources. If the selected entry is already stored in the Personal Lists, the “copy” option is not displayed.
Ready Link Saving a Ready Link Number When you have finished a Ready Link call, you will see the Ready Link number and the text “R-Link call ended” on the display . Y ou can save a Ready Link number to your Personal Lists from this end display . T o save the number: 1.
Adding a New Contact to Y our Personal List Y ou can store a total of 200 entries in the Personal Lists. T o add a new Ready Link contact: 1. Press . 2. Select Go to > Personal List > Add Contact . – or – Select a contact, select Options (right softkey), and then select Add Contact .
Ready Link Adding a New Group to Y our Personal Group List Y ou can add new groups to the Personal Group List. Each group can include up to five members. Y ou can enter a group member directly or select the member from the Personal List. T o add a new Ready Link group entr y: 1.
Editing a Contact in Y our Personal List T o edit a Personal List contact: 1. Press . 2. Select Go to > Personal List . 3. Scroll to the entry you want to edit and select Options (right softkey). 4. Select Edit , and then select the field you want to edit ( Name or R-Link Number ).
Ready Link 8. Edit the entry , select OK (left softkey), and select Save (left softkey) to save your changes. 9. Select Update (left softkey) to update your Personal Group List. Erasing Ready Link List Entries Erasing an Entry in Y our Personal Lists T o erase a contact or a group: 1.
Erasing a Ready Link List Y ou can erase all entries saved in the Ready Link List. T o erase a Ready Link List: 1. From the Ready Link List, select Options (right softkey) > Erase R-Link List . 2. Select an option and press . 䡲 Outgoing to erase all outgoing Ready Link calls.
Ready Link Managing Ready Link Settings Assigning Speed Dialing for Ready Link Entries T o assign speed dialing for Ready Link entries: 1. Select > Contacts > SpeedDial #s .
Setting Ready Link Guard This feature enables you to display a warning message when you cannot receive Ready Link calls. T o set the Ready Link Guard: 1. Select > Settings > Ready Link > R-Link Guard . (A message will be displayed.) 2. Select OK (left softkey) to continue.
Ready Link Setting V ibrate Pattern for Ready Link Calls Y ou can select your favorite vibrate pattern for Ready Link calls. T o select a vibrate pattern for Ready Link calls: 1. Select > Settings > Ready Link > Sounds > Vibrate Pattern . 2.
Setting the Speakerphone for Ready Link Calls Y ou can set your phone to use speakerphone mode for Ready Link calls. By default, the speakerphone is set to on. T o set the speakerphone mode: 䊳 Select > Settings > Ready Link > Speakerphone > On or Off .
Media Player Section 2K Using the Built-In Media Player In This Section ⽧ Y our Multimedia Channel Options (page 184) ⽧ Accessing Y our Media Player’s Channel Listings (page 185) ⽧ Playing a V.
Y our Multimedia Channel Options Sprint TV SM offers a variety of accessible audio or video channels, depending on your wireless service plan and multimedia subscriptions. Your subscription options include a comprehensive basic service as well as a full menu of additional channel options.
Media Player Accessing Y our Media Player’ s Channel Listings It’ s easy to access and view the channel listings on your M1 by Sanyo from the phone’ s main menu. T o access your media player and channel listings: 䊳 Select > Media Player > Channel Listing .
Playing a V ideo or Audio Clip T o select and play a media clip in the Channel Listing: 1. Select > Media Player > Channel Listing . 2. Use your keypad to enter a channel number (or use your navigation key to scroll to a channel and press ).
Media Player Media Folder Options T o access a media folder’ s options, display the media folder and select Options (right softkey). T o select an option, highlight it and press . 䢇 Media Listing to display the media file list under the media folder .
Playlists Y ou can create playlists to organize media files stored in your phone. T o create a playlist: 1. Select > Media Player > Playlist . 2. Highlight <New Playlist> and press . 3. Enter a name for the new playlist and press . 4. Select from the files that are available in the media folder and select Done (left softkey).
Media Player T o remove files from a playlist: 1. Select > Media Player > Playlist . 2. Select the playlist that you want to remove files from and press . 3. While displaying files contained within a playlist, select Options (right softkey) > Remove .
Playing Media Clips Using the External Control Key The external control key can be used to play , pause, stop, forward, or rewind a media clip while the phone is closed.
Media Player Multimedia F AQs 1. Will I know if I’m receiving an incoming call while I’m viewing or listening to an audio clip? No. All incoming calls will roll into voicemail while you are playing a clip. If the caller leaves a voicemail, the voicemail icon will be displayed on the screen.
5. After purchasing access to an Av ailable Channel for a monthly fee, do I receive any confirmation? That is, how do I know it has been purchased? The next time you access your media player’ s channel listings, the purchased channel title and corresponding number will be displayed in the My Channels section.
Media Player 10. If I put on my stereo headphones and insert them into the phone’ s headset jack, can I close the phone while I am playing an audio (or video) clip without interrupting the c lip? Y es.
Section 2L Using Bluetooth In This Section ⽧ T urning Bluetooth On and Off (page 195) ⽧ Using the Bluetooth Settings Menu (page 196) ⽧ Bluetooth Profiles (page 198) ⽧ Pairing Bluetooth Devices.
Using Bluetooth T urning Bluetooth On and Off By default, your phone’ s Bluetooth feature is turned off. T urning Bluetooth on makes your phone “available” to other in-range Bluetooth devices. T o make your phone visible to other devices you must also set your phone’ s visibility to other than Hidden.
Using the Bluetooth Settings Menu The Bluetooth Settings menu allows you to set up many of the characteristics of your phone’ s Bluetooth service, including: 䢇 Entering or changing the name your p.
Using Bluetooth Bluetooth Settings: V isibility The Visibility section of the Bluetooth Settings menu allows you to manage your availability to other Bluetooth devices. T o configure your phone’s visibility (discoverability) to other Bluetooth devices: 1.
Bluetooth Settings: My Device Information T o display your phone’s device information: 䊳 Select > Settings > Bluetooth > My Device Info . Setting Auto-Accept Y ou can configure your phone’ s accessibility to other Bluetooth devices. T o configure your phone’s accessibility to other Bluetooth devices: 1.
Using Bluetooth 䢇 Hands-Free Profile – This profile functions as a wireless car -kit. Incoming calls ring to the hands-free headset or device. Calls can be received by pressing a button on the headset or device. For dialing, four functions are supported: recent call dial, voice dial, speed dial, and number dial.
P airing Bluetooth Devices Paired Devices The Bluetooth pairing process allows you to establish trusted connections between your phone and another Bluetooth device. When devices are paired, a passcode (sometimes called a PIN) is shared between devices, allowing for fast, secure connections while bypassing the discovery and authentication process.
Using Bluetooth Using the T rusted Devices Options Once you have created paired devices, several options are available from the trusted devices list. T o use the trusted devices options: 1.
Printing Data via Bluetooth Y ou can print out your pictures, Contacts entries, business card, calendar event, and messages stored on the phone. (Some Bluetooth-enabled printers may not support this feature.) T o print data via Bluetooth: 1. Select > T ools > Bluetooth .
Using Bluetooth Sending Data via Bluetooth Y ou can send data saved on your phone to another Bluetooth device. T o send data via Bluetooth: 1. Select > T ools > Bluetooth . 2. Select the device from the trusted devices list and then select Options (right softkey) > Send Item .
204.
Qwest ® Ser vice F eatures Section 3.
Section 3A Qwest ® Ser vice F eatures: The Basics In This Section ⽧ Using Voicemail (page 207) ⽧ Using SMS T ext Messaging (page 215) ⽧ Using Caller ID (page 218) ⽧ Responding to Call Waiting.
Qwest Service Using V oicemail Setting Up Y our Voicemail All unanswered calls to your phone are automatically transferred to your voicemail, even if your phone is in use or turned off. Therefore, you will want to set up your voicemail and personal greeting as soon as your phone is activated.
V oicemail Notification There are several ways your phone alerts you to a new message: 䢇 By displaying a message on the screen. 䢇 By sounding the assigned ringer type.
Qwest Service Retrieving Y our Voicemail Messages Y ou can review your messages directly from your wireless phone or from any other touch-tone phone. T o dial from your wireless phone, you can either speed dial your voicemail or use the menu keys. Using One-T ouch Message Access 䊳 Press and hold .
Voicemail Button Guide Here’ s a quick guide to your keypad functions while listening to voicemail messages. For further details and menu options, see “V oicemail Menu Key” on page 213.
Qwest Service Setting Up Group Distribution Lists Create up to 20 separate group lists, each with up to 20 customers. 1. Press and hold to access your voicemail. 2. Press to change your Personal Options, following the system prompts. 3. Press for Settings.
Voicemail-to-V oicemail Message Reply Reply to a voice message received from any other voicemail user . 1. After listening to a voice message, press . 2. Follow the voice prompts to record and send your reply . Voicemail-to-V oicemail Message Forwarding Forward a voice message, except those marked “Private, ” to other voicemail users.
Qwest Service Extended Absence Greeting When your phone is turned off or you are off the home network for an extended period, this greeting can be played instead of your normal personal greeting. 1. From the main voicemail menu, press for Personal Options.
Save Options Send a Message Personal Options Settings Skip Passc ode Autoplay Message Date & Time On/ Off Change Passc ode Group Distribution List Numeric Paging to a Phone Return to P ersonal Opt.
Qwest Service Using SMS T ext Messaging With SMS T ext Messaging, you can use other people’ s phone numbers to send instant text messages from your phone to their messaging-ready phones – and they can send messages to you. When you receive a new message, it will automatically display on your phone’ s screen.
4. Compose a message or use the preset messages or smileys (icons). 䡲 T o type a message, use your keypad to enter your message. Select Mode (right softkey) to select a character input mode.
Qwest Service Using Preset Messages Preset messages make sending text messages to your friends, family , and coworkers easier than ever . T o send preset messages into the text box: 1. Select > Settings > Messaging > Preset Msgs . 2. Highlight a message you wish to send and select Options (right softkey) > Send T ext .
Using Caller ID Caller ID allows people to identify a caller before answering the phone by displaying the number of the incoming call. If you do not want your number displayed when you make a call, just follow these easy steps. T o block your phone number from being displayed for a specific outgoing call: 1.
Qwest Service Making a Three-Way Call With Three-Way Calling, you can talk to two people at the same time. When using this feature, the normal airtime rates will be charged for each of the two calls. T o make a Three-Way Call: 1. Enter a number you wish to call and press .
Using Call Forwarding Call Forwarding lets you forward all your incoming calls to another phone number – even when your phone is turned off. Y ou can continue to make calls from your phone when Call Forwarding is activated. T o activate Call Forwarding: 1.
Section 3B: Sprint PCS Vision 221 Section 3B Sprint PCS V ision In This Section ⽧ Sprint PCS Vision Applications (page 222) ⽧ Getting Started With Sprint PCS Vision (page 222) ⽧ Accessing Messag.
222 Section 3B: Sprint PCS Vision Sprint PCS V ision Applications Here is a brief list of the applications available through your phone. For more information, please visit us online at www .qwest.com . Sprint PCS Picture Mail – Instantly shoot, share, and print sharp, high- resolution digital pictures with your phone.
Section 3B: Sprint PCS Vision 223 Y our User Name When you buy a compatible phone and sign up for service, you’re automatically assigned a user name, which is typically your 10-digit wireless phone number followed by “@qwest.sprintpcs.com.” For example, if your phone number is 555-123-4567, your user name will be 55512345 6 7@qwest.
224 Section 3B: Sprint PCS Vision Launching a Data Connection T o launch a data connection: 䊳 Select > Web . (Y our data connection will start and the Sprint Power Vision home page will be displayed.) The Sprint Power V ision Home P age While connecting, the following will appear on the screen: Connecting.
Section 3B: Sprint PCS Vision 225 Net Guard When you first connect to the Web, the Net Guard will appear to confirm that you want to connect. This feature helps you avoid accidental connections. Y ou can disable the Net Guard in the future by selecting Always Auto-Connect when the Net Guard is displayed.
226 Section 3B: Sprint PCS Vision A Sprint Power Vision connection is active (data is being transferred); the transmit/receive symbol will animate to indicate data transmission. Incoming voice calls go directly to voicemail; outgoing voice calls can be made, but the Sprint Power Vision connection will terminate.
Scrolling As with other parts of your phone’ s menu, you’ll have to scroll up and down to see everything on some W eb sites. T o scroll line by line through Web sites: 䊳 Press the navigation key up or down. T o scroll page by page through Web sites: 䊳 Press the volume buttons on the side of the phone.
Accessing Messaging Y ou can send and receive emails, text messages, and Sprint PCS Picture Mail messages right from your phone. Messaging allows you to stay connected to friends, family , and coworkers 24 hours a day anywhere on the home network. Message T ypes There are many types of text messaging available on your phone.
Section 3B: Sprint PCS Vision 229 Accessing Instant Messaging Sprint PCS Vision also provides you with access to popular instant messaging (IM) clients, including AOL ® Instant Messenger TM and Y ahoo! ® Messenger . T o access instant messaging clients from your phone: 1.
230 Section 3B: Sprint PCS Vision Downloading Content With Sprint PCS Vision, you have access to a dynamic variety of downloadable content, such as Games, Ringers, Screen Savers, and other applications. (Additional charges may apply .) The basic steps required to access and download content are outlined below .
Section 3B: Sprint PCS Vision 231 Downloading an Item Once you’ve selected an item you wish to download, highlight it and press or press Go (left softkey). Y ou will see a summary page for the item including its title, the vendor , the download details, the file size, and the cost.
232 Section 3B: Sprint PCS Vision Exploring the Web With Web access on your phone, you can browse full-color graphic versions of your favorite Web sites, making it easier than ever to stay informed while on the go. Follow sports scores, breaking news, and weather , and shop on your phone anywhere on the home network.
Section 3B: Sprint PCS Vision 233 Options available under the browser menu include: 䢇 Home. Returns the browser to the home page. 䢇 Forward. Returns you to a previously viewed page (after having used the key). 䢇 Mark this page. Allows you to create new bookmarks.
234 Section 3B: Sprint PCS Vision Creating a Bookmark Bookmarks allow you to store the address of your favorite Web sites for easy access at a later time. T o create a bookmark: 1. Go to the Web page you want to mark. 2. Press the right softkey to open the browser menu.
Section 3B: Sprint PCS Vision 235 Deleting a Bookmark T o delete a bookmark: 1. Press the right softkey to open the browser menu. 2. Select View Bookmarks . 3. Scroll to highlight the bookmark you’d like to delete and press the right softkey . 4. Select Delete from the menu.
236 Section 3B: Sprint PCS Vision Restarting the Web Browser If the Web browser appears to be malfunctioning or stops responding, you can usually fix the problem by simply restarting the browser . T o restart the Web browser: 1. From an active data connection, press the right softkey to display the browser menu.
Section 3C: Sprint Power V ision 237 Section 3C Sprint P ower V ision In This Section ⽧ Using Sprint Power V ision (page 238) ⽧ Exploring the Sprint Music Store (page 239) ⽧ Personalizing Y our .
238 Section 3C: Sprint Power V ision Using Sprint P ower V ision Enabling Sprint P ower Vision Since Sprint Power Vision is an enhancement to your phone's data capabilities, you don't need to take any extra action to make Sprint Power Vision available.
Section 3C: Sprint Power V ision 239 Exploring the Sprint Music Store SM Y our wireless service allows you to access the Sprint Music Store, an online music distribution site that lets you purchase and download digital music files to play on your phone.
240 Section 3C: Sprint Power V ision 䡲 Categories allows you to choose from categories such as What’ s Hot and New Releases, and to browse genres. 䡲 Search gives you the option of searching for specific songs or artists. Just use your keypad to enter your search criteria in the available field.
Section 3C: Sprint Power V ision 241 䡲 Create Playlist... to set up a custom playlist of songs you like to hear together . Follow the onscreen instructions to create a name for the playlist, select songs by artist, genre, and title, and create an order for the playlist.
242 Section 3C: Sprint Power V ision P ersonalizing Y our Ser vice With On Demand With Sprint Power Vision’ s exclusive On Demand feature, you can personalize your phone’ s data services to suit your needs. The On Demand feature makes it easier than ever to receive the most popular Web information and categories instantly .
Section 3C: Sprint Power V ision 243 2. From the On Demand menu screen, highlight a category (in this case, News ) and press . (Y ou will be presented with a list of news categories.) 3. Use your navigation key to scroll through the news categories or stories.
244 Section 3C: Sprint Power V ision Previewing On Demand in Themes Y ou can preview the On Demand news and weather information right on your phone’ s standby screen using a theme. Download and apply any theme, and then select the On Demand icon in your theme’ s standby screen.
Section 3C: Sprint Power V ision 245 Applying Themes Once you’ve downloaded a theme, you can apply it to your phone from the Settings menu. T o apply a downloaded theme: 1. Select > Settings > Display > Themes . 2. Select an available theme and press .
246.
Section 4 Safety and W arranty Information.
248 Section 4A: Important Safety Information Section 4A Important Safety Information In This Section ⽧ General Precautions (page 249) ⽧ Maintaining Safe Use of and Access to Y our Phone (page 250).
Section 4A: Important Safety Information 249 General Precautions There are several simple guidelines to operating your phone properly and maintaining safe, satisfactory ser vice. 䢇 T o maximize performance, do not touch the upper back portion of your phone where the internal antenna is located while using the phone.
250 Section 4A: Important Safety Information Maintaining Safe Use of and Access to Y our Phone Do Not Rely on Y our Phone for Emergency Calls Mobile phones operate using radio signals, which cannot guarantee connection in all conditions. Therefore you should never rely solely upon any mobile phone for essential communication (e.
Section 4A: Important Safety Information 251 T urning Off Y our Phone in Dangerous Areas T o avoid interfering with blasting operations, turn your phone off when in a blasting area or in other areas with signs indicating two-way radios should be turned off.
252 Section 4A: Important Safety Information Using Y our Phone With a Hearing Aid Device Y our phone has been tested for hearing aid device compatibility . When some wireless phones are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise.
Section 4A: Important Safety Information 253 Getting the Best Hearing Device Experience With Y our Phone T o further minimize interference: 䢇 There is usually less interference on the microphone setting than the telecoil setting. 䢇 Set the phone’ s Display and Keypad backlight settings to ensure the minimum time interval: 1.
254 Section 4A: Important Safety Information 䢇 In order to avoid damage, charge the batter y only in temperatures that range from 32° F to 113° F (0° C to 45° C). 䢇 Don’t use the battery charger in direct sunlight or in high humidity areas, such as the bathroom.
Section 4A: Important Safety Information 255 Radiofrequency (RF) Energy Understanding How Y our Phone Operates Y our phone is basically a radio transmitter and receiver . When it’s turned on, it receives and transmits radiofrequency (RF) signals. When you use your phone, the system handling your call controls the power level.
256 Section 4A: Important Safety Information Specific Absorption Rates (SAR) for Wireless Phones The SAR is a value that corresponds to the relative amount of RF energy absorbed in the head of a user of a wireless handset. The SAR value of a phone is the result of an extensive testing, measuring and calculation process.
Section 4A: Important Safety Information 257 FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
258 Section 4A: Important Safety Information Owner’ s Record The model number , regulatory number , and serial number are located on a nameplate inside the battery compartment. Record the serial number in the space provided below . This will be helpful if you need to contact us about your phone in the future.
Section 4B: Warranty 259 Section 4B Manuf acturer’ s W arranty In This Section ⽧ Manufacturer’ s W arranty (page 260) Y our phone has been designed to provide you with reliable, worry-free ser vice. If for any reason you have a problem with your equipment, please refer to the manufacturer’ s warranty in this section.
260 Section 4B: Warranty Manuf acturer’ s W arranty Manufacturer’ s Limited Warranty SANYO FISHER COMP ANY (“SANYO”) offers you, the original purchaser who has purchased the enclosed subscribe.
Section 4B: Warranty 261 This limited warranty does not cover and is void with respect to the following: (i) Products which have been improperly installed, repaired, maintained or modified (including .
262 Section 4B: Warranty Some States do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
Index 263 Index A Abbreviated Dialing 35, 68 Account Passwords 5 Airplane Mode 60 Alarm Clock 110 Alert Notification 49 Alphabet Mode 42 Animation 51 Answering Calls 26 Any Key Answer 64 AOL Instant M.
264 Index Camera Mode Options 141 Downloading Pictures and Videos 158 Flash 142 In Phone Folder 151–152 Multiple Shots 143 Printing Pictures 160 Recording Videos 147 Self-Timer 142 Sending Picture M.
Index 265 K Key Functions 10 Key Guard 66 Key Press Echo 47 L Language 64 Location Settings 56 Lock Code 72 Locking Y our Phone 71 M Making Calls 24 From Call History 88 From the Contacts List 36 In L.
266 Index Q Qwest Wireless Customer Service 6 R Radiofrequency (RF) Energy 255 Ready Link 162–182 Alert Notification 181 Contacts 172–177 Floor Display 182 Making a Call (Group) 167 Making a Call .
Index 267 Downloading Content 230 Launching 224 Messaging 228–229 Navigating 226 User Name 223 Sprint Power Vision 237–245 Enabling and Disabling 79 On Demand 242 Password 5 Sprint Music Store 239.
Notes ___________________________________________________ ___________________________________________________ ___________________________________________________ ______________________________________.
An important point after buying a device Sanyo M1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanyo M1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanyo M1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanyo M1 you will learn all the available features of the product, as well as information on its operation. The information that you get Sanyo M1 will certainly help you make a decision on the purchase.
If you already are a holder of Sanyo M1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanyo M1.
However, one of the most important roles played by the user manual is to help in solving problems with Sanyo M1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanyo M1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
