Instruction/ maintenance manual of the product LNS-W32 Sanyo
Go to page of 10
F ollowing chec ks and confir mations should be tak en f or saf ety . Check the f ollo wing things by the time of the cabinet assemb ly after the lens replacement. 1. Check the lens is securely fix ed. 2. Check no parts is missing, or no mounting par t is loose.
Fig-1 Fig-2 Fig-3 Fig-4 SCREW "A" Remov e 2 scre ws-A. Press the button (or remo v e 2 screws-B) on the low er of the front panel and remov e the front panel. Remov e the light-b lock sheet from the light- bloc k sheet base. REMO VE THE LENS CO VER AND LIGHT - BLOCK SHEET (See Figure-1 and 2) 1 1.
3 REMO VE THE LENS (See Figure-5 and 6) Disconnect the Lens Shift connector "K16L" from the circuit board on cabinet left side. Disconnect the Zoom and F ocus connector "K16J" from the circuit board. Remov e the lens motor lead from lead holder .
-4- Fig-6 Fig-7 DRIVER IN THE LENS LENS MOUNTING BRACKET 4 MOUNT THE LENS (See Figure-5 and 6) 5 MOUNT THE LIGHT -BLOCK SHEET AND FRONT P ANEL (See Figure-7) Remov e protectiv e caps (front and back) on the lens. Mount the lens on lens mounting brac ket with 4 screws .
T ur n the lens cov er to counter-clockwise and pull it tow ard front and remov e the Lens Cov er . Remov e 2 Scre ws-A. Remov e the front cabinet REMO VE THE LENS CO VER AND FRONT CABINET 1 1. 2. 2 REMO VE THE LIGHT -BLOCK SHEET BASE AND LIGHT -BLOCK SHEET (See Figure-2) P erform the steps to f or lens replacement.
4 MOUNT THE LENS (See Figure-5) Remov e protectiv e caps (front and back) on the lens. Mount the lens on lens mounting brac ket with Upper 2 screws . Use the driver (4 mm, Y ellow) included with the lens to f asten the screws . Remov e the low er 2 screws on the Lens .
FOCUS ADJUSTMENT Set up the projector and project image on the screen. 1. Loosen the F ocus Lock Scre w on the lens. 2. Rotate the lens to obtain proper f ocus on center area of the screen. 3. Tighten the F ocus Lock Scre w . When proper f ocus is not obser ved at outer area of the screen, proceed to f ollowing adjustments .
- 8 - T ur n the lens cov er to counter-clockwise and pull it tow ard front and remov e the Lens Cov er . Remov e 2 Screws-A. Remov e the front cabinet REMO VE THE LENS CO VER AND FRONT CABINET 1 1. 2. 2 REMO VE THE LIGHT -BLOCK SHEET BASE AND LIGHT -BLOCK SHEET P erform the steps to f or lens replacement.
- 9 - LENS ATTACHMENT Part No. (610 275 6029) 4 MOUNT THE LENS Remov e protectiv e caps (front and back) on the optional lens. Mount the lens on the lens attachment with 4 Screws . Connect the lens motor lead connector to the sock et on the lens attachment.
- 10 - FOCUS ADJUSTMENT Set up the projector and project image on the screen. 1. Loosen the F ocus Lock Scre w on the lens. 2. Rotate the lens to obtain proper f ocus on center area of the screen. 3. Tighten the F ocus Lock Scre w . When proper f ocus is not obser ved at outer area of the screen, proceed to f ollowing adjustments .
An important point after buying a device Sanyo LNS-W32 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanyo LNS-W32 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanyo LNS-W32 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanyo LNS-W32 you will learn all the available features of the product, as well as information on its operation. The information that you get Sanyo LNS-W32 will certainly help you make a decision on the purchase.
If you already are a holder of Sanyo LNS-W32, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanyo LNS-W32.
However, one of the most important roles played by the user manual is to help in solving problems with Sanyo LNS-W32. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanyo LNS-W32 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
