Instruction/ maintenance manual of the product WFV44 Sanus Systems
Go to page of 8
Hardware: Shown as actual size (16) Cam Pin - a (6) Dowel Pin - c (16) Dowel - d (16) Shelf Pin - e (16) Cam - b (8) W ood Screw - f (6) Spacer - g (4) Phillips Bolt - h (2) Door Handle - i* (8) Hinge.
Parts List (Cont) (2) Bottom Shelf - q (2) Mid Shelf - r (2) Glass Panel - t (2) Small Door - s (2) Back Panel - x (1) Left Side Panel - u (1) Right Side Panel - v (1) Center Panel - w Step 1: Prepare the Side Panels and Center Panel Thread a Cam Pin (a) into each of the smaller holes in each Panel (u,v ,w).
Step 2: Prepare Stretchers Add a Cam (b) to each Front Stretcher (o) and Back Stretcher (p). Make sure the arrow in each Cam faces the hole on the side of the Stretchers.
Step 4: Add Center Panel Press t the Center Panel (w) against the Stretchers (o,p) so the Cam Pin (a) goes into the hole which the Cams (b) point to. The Dowel ts into the adjacent hole. T ighten each Cam in a clockwise motion until the Stretchers are secured to the Center Panel.
Step 6: Add Side Panel Press t the Side Panel (v) against the Stretchers (o,p) so the Cam Pin (a) goes into the hole which the Cams (b) point to. The Dowel (d) going into the adjacent hole. T ighten each Cam in a clockwise motion until the Stretchers are secured to the Side Panel.
Step 8: Add T op Gently tap a Dowel Pin (c) into the holes on the top of each Panel (u,v ,w). Slide a Spacer (g) over each Dowel Pin. Press t the T op (n) so it ts onto the Dowel Pins.
Step 10: Door Install Position the Door (s) so the holes in the Hinge Plate (m) line up with the front pair of holes in the Side Panel (u,v). Insert a Hinge Plate Screw (k) through the Hinge Plate and thread it into each hole in the Side Panel. T ighten with a Phillips screw driver .
Sanus Systems 2221 Hwy 36 W est, St. Paul, MN 551 13 12.28.05 Customer Service: 800.359.5520. See complementary Sanus products at www .sanus.com Step 1 1: Add Back Panel Position each Back Panel (x) up against the assembly and thread a W ood Screw (f) through it and into the Back Stretcher (p).
An important point after buying a device Sanus Systems WFV44 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanus Systems WFV44 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanus Systems WFV44 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanus Systems WFV44 you will learn all the available features of the product, as well as information on its operation. The information that you get Sanus Systems WFV44 will certainly help you make a decision on the purchase.
If you already are a holder of Sanus Systems WFV44, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanus Systems WFV44.
However, one of the most important roles played by the user manual is to help in solving problems with Sanus Systems WFV44. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanus Systems WFV44 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
