Instruction/ maintenance manual of the product WFA37 Sanus Systems
Go to page of 8
Hardware: Shown as actual size (8) Cam Pin - a (4) Dowel Pin - c (8) Dowel - d (16) Shelf Pin - e (8) Cam - b (4) W ood Screw - f (4) Spacer - g (2) Phillips Bolt - h (1) Door Handle - i* (4) Hinge Sc.
Parts List (Cont) (1) Bottom Shelf - q (3) Mid Shelf - r (1) W ood Panel - w (1) Left Side Panel - s (1) Right Side Panel - t (1) Back Panel - u (1) Door - v Step 1: Prepare the Side Panels Thread a Cam Pin (a) into each of the smaller holes in the Side Panels (s,t).
Step 2: Prepare Stretchers Add a Cam (b) to each Front Stretcher (o) and Back Stretcher (p). Make sure the arrow in each Cam faces the hole on the side of the Stretchers.
Step 4: Add Side Panel Press t the Side Panel (t) against the Stretchers (o,p) so the Cam Pin (a) goes into the hole which the Cams (b) point to. The Dowel (d) ts into the adjacent hole. T ighten each Cam in a clockwise motion until the Stretchers are secured.
Step 6: Add T op Gently tap a Dowel Pin (c) into the holes on the top of each Side Panel (s,t). Slide a Spacer (g) over each Dowel Pin. Press t the T op (n) so it ts onto the Dowel Pins.
Step 8: Add Hinge Assembly to Door Insert a Hinge Screw (j) through the Hinge (l) and thread it into the Door (v). T ighten each with a Phillips screw driver .
Step 10: Add Mid Shelves Thread a Shelf Pin (e) into the desired location in the Side Panels (s,t). For each shelf, four Shelf Pins will be required. Insert each Mid Shelf (r) into the assembly and press t onto the Shelf Pins. Make sure the wood strip on each shelf is facing toward the front.
Sanus Systems 2221 Hwy 36 W est, St. Paul, MN 551 13 12.28.05 Customer Service: 800.359.5520. See complementary Sanus products at www .sanus.com Step 12: Hinge Adjustment for small Door Each hinge Assembly is adjustable in multiple directions. See Diagram 12 for assistance.
An important point after buying a device Sanus Systems WFA37 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanus Systems WFA37 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanus Systems WFA37 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanus Systems WFA37 you will learn all the available features of the product, as well as information on its operation. The information that you get Sanus Systems WFA37 will certainly help you make a decision on the purchase.
If you already are a holder of Sanus Systems WFA37, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanus Systems WFA37.
However, one of the most important roles played by the user manual is to help in solving problems with Sanus Systems WFA37. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanus Systems WFA37 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
