Instruction/ maintenance manual of the product PFFP2 Sanus Systems
Go to page of 8
Assembly Instructions for Sanus Systems Platinum Furniture Model: PFFP2 Thank you for choosing Sanus Systems Platinum Furniture. The PFFP2 is designed to support a 30” to 50” flat panel tele vision up to 130 lbs. If you have an y questions re garding this or an y other Sanus Systems product, please contact us at 800.
Hardware: All hardware shown as actual size (2) M6 x 20 Bolt - o (2) M8 x 35 Bolt - p (2) M12 x 40 Bolt - q (6) M8 Allen Bolt - r (4) 1/4-20 Allen Bolt - s (2) Safety Bolt - t (8) M8 W asher - u (6) S.
Step 1: Secure Pillar to Base Attach the Pillar (g) to the Base (a) by placing each M12 x 40 Bolt (q) through an M12 W asher (x), each M8 x 35 Bolt (p) through an M8 W asher (u). Then thread each Bolt up through the Base and into the Pillar as shown in Diagram 1a.
Step 3: W all Bracket Assembly Thread an M8 Allen Bolt (r) through a Spring W asher (v), an M8 W asher (u), through the middle hole in the W all Bracket (b), and into the W all Plate (h) as seen in Diagram 3. Loosely tighten the M8 Allen Bolt into the W all Plate with an Allen K ey (oo).
Step 5: Add W all Bracket Slide the W all Bracket Assembly down into place on the Pillar (g). Make sure the W all Plate (h) fits into the channel in the Pillar as seen in the T op V iew of Diagram 5.
Step 7: Mounting Monitor Brackets to a television with a at back First, determine the diameter of the Bolt (y ,z,aa,bb) your TV requires by hand threading them into the threaded insert on the back of the TV . If you encounter any resistance stop immediately! Once you ha ve determined the correct diameter , see the appropriate Diagram below .
Step 8: Mounting Monitor Brackets to a television with a curved back or an obstruction near the threaded insert First, determine the diameter of the Bolt (cc,dd,ee,f f) your TV requires by hand threading them into the threaded insert on the back of the TV .
Step 9: Hang TV and Safety Bolt W arning: Lifting the television may r equire tw o people! T o hang the TV onto the W all Bracket (b) first hook the Monitor Brackets (e,f) over the top of the W all Bracket, then let the bottom of the Monitor Brackets rotate in under the bottom of the W all Bracket as sho wn in the Detailed V iew of Diagram 9a.
An important point after buying a device Sanus Systems PFFP2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanus Systems PFFP2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanus Systems PFFP2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanus Systems PFFP2 you will learn all the available features of the product, as well as information on its operation. The information that you get Sanus Systems PFFP2 will certainly help you make a decision on the purchase.
If you already are a holder of Sanus Systems PFFP2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanus Systems PFFP2.
However, one of the most important roles played by the user manual is to help in solving problems with Sanus Systems PFFP2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanus Systems PFFP2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
