Instruction/ maintenance manual of the product NFV49 Sanus Systems
Go to page of 4
Assembly Instructions for Natural Furniture, Models: NF203, NF213, NFV49 Thank you for choosing the Natural Furniture line from Sanus Systems. If you have any questions regarding this or any other Sanus Systems product, please contact us at 800.359.5520 or visit us at www .
Step 1: Attach the Cross T ubes to the Front Frame Position the Front Frame ( A ) as shown in Diagram 1; then, thread each Decorative Face Bolt ( K ) through the Front Frame, a Three Hole Plate ( C ) and into a Steel Cross T ube ( B ).
Step 2: Attach Rear Supports NOTE: The Rear Supports (E) must be positioned with set of three holes closest to the edge toward the top and the horizontal slots facing the Front Frame (A) .
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 551 13 04.06.06 (100043) Customer Service: 800.359.5520. See complementary Sanus products at www .sanus.com Step 4: Add T op Glass Shelf Place four Glass Protectors ( L ) evenly along the top of the Front Frame ( A ); then, add two Glass protectors to the top of each Rear Support ( E ).
An important point after buying a device Sanus Systems NFV49 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanus Systems NFV49 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanus Systems NFV49 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanus Systems NFV49 you will learn all the available features of the product, as well as information on its operation. The information that you get Sanus Systems NFV49 will certainly help you make a decision on the purchase.
If you already are a holder of Sanus Systems NFV49, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanus Systems NFV49.
However, one of the most important roles played by the user manual is to help in solving problems with Sanus Systems NFV49. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanus Systems NFV49 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
