Instruction/ maintenance manual of the product LC2A Sanus Systems
Go to page of 24
Sanus Systems 2221 Hwy 36 W est, Saint P aul, MN 55113 USA • sanus.com Americas: 800-359-5520 • 651-484-7988 • info@sanus.c om Europe , Middle East, and Africa: 31 (0) 40 26 68 619 • sanus.europe@sanus.com Asia P acifi c: 86 755 8996 9226 • 800 999 6688 (mainland China only) • sanus.
6901-170129 <00> 2 PL W AŻNE INSTRUKCJE DO T Y CZĄCE BEZPIECZEŃST W A — NIE WYRZUCAĆ Dziękujemy za wybranie uchwytu VisionMount™ L C2A rmy Sanus Systems .
6901-170129 <00> 3 EN CA UTION: Do not use this product for an y purpose not explicitly speci ed by Sanus Systems. Improper installation may cause property damage or personal injur y.
6901-170129 <00> 4 EL ΠΡΟΣ Ο ΧΗ: Μην χρησιμοποιείτε το προϊόν αυτ ό για χρήσεις οι οποίες δεν αναφέρονται ρητά από τη Sanus Systems.
6901-170129 <00> 5 TR DİKK A T : Bu ürünü Sanus Sistemleri tarafından açıkça belirtilmeyen bir amaç için kullanmayın. Hatalı kurulum kişisel yaralanmaya ya da cihazınızın zarar görmesine neden olabilir .
6901-170129 <00> 6 EN Supplied P arts and Hardware Before starting assembly , verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item to your dealer; contact Sanus Systems C ustomer Ser vice.
6901-170129 <00> 7 [25] x 1 [26] x 1 [04] x 2 [02] x 4 [03] x 8 [01] x 4 1/4-20 x 2.0 in. M4 x 10 mm M5 x 12mm M6 x 12 mm M8 x 40mm M6 x 35mm M5 x 30mm M4 x 30mm M4 M5 M6 M4 / M5 M6 / M8 M4 / M5.
6901-170129 <00> 8 1-1 EN Attach Brackets to Monitor - for monit ors with a at back. FR Fix er les pattes au moniteur - pour les moniteurs à arrière plat. DE Konsolen an Monitor befestigen - für Monitore mit acher Rückwand. ES Fijar los soportes al monitor - para monitores de dorso plano .
6901-170129 <00> 9 M4 [09] [17] [21] M5 M6 M8 [10] [18] [21] [01] [01] [12] [20] [22] [01] [11] [19] [22] [01].
6901-170129 <00> 10 1-2 EN Attach Brackets to Monitor - for monit ors with a cur ved back or obstruction. FR Fix er les pattes au moniteur - pour les moniteurs à arrière incurvé ou en cas de gêne. DE Konsolen an Monitor befestigen - für Monitore mit gekrümmter Rückwand oder einem Hindernis.
6901-170129 <00> 11 M4 [13] [17] [21] M5 M6 M8 [21] [23] [01] [14] [18] [21] [21] [23] [01] [16] [20] [22] [24] [01] [15] [19] [22] [24] [01].
6901-170129 <00> 12 EN Install Vise Assemblies N OT E: Do not over tighten the nut [06] . The vise assembly [03] must rotate freely around the carriage bolt [05] . FR Poser les ensembles étaux N OT E : Ne pas serrer excessivement l’ écrou [06] .
6901-170129 <00> 13 [05] [03] [06] [05] [03] [06].
6901-170129 <00> 14 3 [02] [30].
6901-170129 <00> 15 [26] [25] 4.
6901-170129 <00> 16 EN Thread the Coupler [25] and Tube [26] onto an existing thr eaded pipe drop . Once the T ube [26] is properly aligned, tighten the Set Screws [08] using Allen Wrench [28] and the two Set Screws [B] on the T ube using Allen Wrench [29] .
6901-170129 <00> 17 [ 25 ] [26] [08] [08] 2x [04] [26] [04] [07] [B] [26] 5 [29] [28] [26].
6901-170129 <00> 18 EN T o adjust for level, loosen the two Allen Bolts [C] on the back of the Axis Assembly [04] . Adjust the television and r etighten the Allen Bolts.Tilt is set by simply tilting the television. T o adjust tilt tension, loosen the T ension Knobs [D] .
6901-170129 <00> 19 2x [C ] [D] [04].
6901-170129 <00> 20 EN T o adjust swivel tension, tilt the television forward and remove the Safety Bracket [F] for use as a wrench t o tighten or loosen the T ension Nut [E] . CA U T I O N: Never complet ely remove the T ension Nut [E] . The Safety Bracket [F] must be reinstalled after adjustment.
6901-170129 <00> 21 PL W celu regulacji oporu obracania przechyl t elewizor do przodu i zdejmij wspornik zabezpieczający [F] , aby użyć go jako klucza do dok ręcenia lub poluzowania pokrętła regulacyjnego [E] . P RZES T R O GA: Nigdy nie odkręcaj zupełnie pokrętła regulacyjnego [E] .
6901-170129 <00> 22 [E] [F] [E] [F].
6901-170129 <00> 23 [26] [01] [04] [27] EN Leav e some slack in the cables so that during motion there is no tension on the connectors. Secure cables by attaching Wir e T ies [27] as desired to the Monitor Brackets [01] , Axis Assembly [04] , and the NPT T ube [26] .
6901-170129 <00> 24 EN Milestone A V T echnologies and its a liated corporations and subsidiaries (collectively, “ Milestone ” ), intend to make this manual accurat e and complete. However , Milestone makes no claim that the information contained herein cov ers all details, conditions, or variations.
An important point after buying a device Sanus Systems LC2A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanus Systems LC2A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanus Systems LC2A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanus Systems LC2A you will learn all the available features of the product, as well as information on its operation. The information that you get Sanus Systems LC2A will certainly help you make a decision on the purchase.
If you already are a holder of Sanus Systems LC2A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanus Systems LC2A.
However, one of the most important roles played by the user manual is to help in solving problems with Sanus Systems LC2A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanus Systems LC2A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
