Instruction/ maintenance manual of the product Pakket-505 Sangean
Go to page of 14
.
.
Control Locations Power/Sleep Power On/off/Alarm off/sleep function Display Switch between radio frequency and time while radio is power on Mode Mode set up (please see below mode button set up) Radio.
1.Position the radio face down 2.Press the catch marked " " and slide in the direction shown. 3.Insert the 4 UM-2 (LR6)(AA size) batteries. 4. Replace the battery cover. Choosing a power supply Installing batteries Battery replacement Low battery warnings Using the AC adapter Setting the clock This radio can be operated using.
The real time can be set. 1. When the radio is switched off 2. If the radio switched on, press DISPLA Y button to time status. 3. Press "ENTER" button for more than 2 seconds until " " real time symbol and 4. Set the correct time by pressing the numbered buttons.
5 Waveband selection Direct tuning Manual tuning by tuning UP/DOWN button There are four waveband selection by pressing BAND button Waveband Frequency coverage Aerial Type -------------------------------------------------------------------------------------------- FM 87.
6 Note: Each press of Up or Down button will change the frequency in increment of FM: 100kHz or 200kHz depending on the versions. MW: 9kHz or 10kHz depending on the versions. SW: 5kHz LW : 9kHz Rotary tuning is accomplished using the convenient Rotary Tuning Knob.
3.Press the button marked M (memory), display M and suggested preset number will flash, press ENTER to store your station in that memory position. 4.Preset positions may be exchanged easily. Select preset station that is to be changed, press memory button ( M and existing memory position will flash).
3.Press T uning UP and DOWN button at the same time for more than 2 seconds. The radio will beep and then scan from the lowest frequency on the selected band. Automatically storing stations in preset memory based on signal strength. 4.After APS is completed, a beep will be heard.
Note: 1.When alarm is on, press POWER button to turn off the alarm for 24 hours. 2.Radio alarm on will last for one hour if not turned off by pushing the POWER button. 3.Turn the radio to the required station before setting the radio alarm. When the alarm is on, the radio will play last station selected.
10 Numbered key 8 key 1 key 1 FM 100kHz FM 200 kHz tuning step tuning step 2. MW 9 kHz MW 10 kHz 3 12 hour format 24 hour format 4 Beep tone off Beep tone on 5 Memory Rearranged Complete with ENTER button For example, if you like to change from MW 10 kHz to 9 kHz, press MODE, numbered button 2 , 0 , then complete with ENTER button.
FM Mono/Stereo Headphones (or earphones) Lock switch Light DX/Local switch SW EXT . ANT To listen to FM stereo broadcasts, tune to the required station, plug in headphones and set the FM ST./MO. Switch located on the left side of the radio to to FM ST.
Troubleshooting/RESET button Care and maintenance Specifications If the radio fails to operate correctly, or some digits on the display are missing or incomplete.
Specifications content Power requirement 6V Batteries 4 X IEC size LR6 (AA) (UM-3) Circuit features Semiconductors 1 LSI 7 IC's, 35 transistors, 7 FET , 33 diodes, 3 LED Aerial system AM/L W Built in ferrite aerial SW T elescopic aerial FM T elescopic aerial Output Power 300 mW 10% T.
An important point after buying a device Sangean Pakket-505 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sangean Pakket-505 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sangean Pakket-505 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sangean Pakket-505 you will learn all the available features of the product, as well as information on its operation. The information that you get Sangean Pakket-505 will certainly help you make a decision on the purchase.
If you already are a holder of Sangean Pakket-505, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sangean Pakket-505.
However, one of the most important roles played by the user manual is to help in solving problems with Sangean Pakket-505. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sangean Pakket-505 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
