Instruction/ maintenance manual of the product SW-232 Samsung
Go to page of 9
CD-R/R W DRIVE SW -232 User's Guide FCC Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Contents 2 Safety Precautions 3 ENGLISH The following diagrams illustrate the precautions to be taken when using your CD-R/RW drive. ✱ Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ENGLISH 5 Upgrading the Firmware Flash Memory Y our CD-R/RW Drive 4 1. Connector for stereo headphones with a 3.6 mm stereo mini-jack. 2. Headphone volume control. 3. Emergency eject hole. (if the compartment does not open when you press the Eject button, power off the computer, insert a pin or unfolded paper clip in the hole and push firmly) 4.
ENGLISH 7 6 Installing the CD-R/RW Drive Connecting the Cables To install your CD-R/RW drive in the PC, proceed as follows. 1 Make sure that the PC is powered off and disconnected from any power source.
ENGLISH 9 8 Installing the CD Record Utility Installing the Device Driver 3 Installing a jumper on the master/slave select terminal Connect a jumper to the rear side of the CD-R/RW. If the jumper is connected to MA (Master), it will work in the Master mode.
ENGLISH 11 Using the CD-R/RW Drive Storing and Cleaning Y our Discs Setting Up the Device Driver 10 ◆ Automatic Setup 1 Insert the setup diskette in the diskette drive and change the directory to A:, where A: is the diskette drive. To do so, type A : after the C : prompt and press [Enter] .
ENGLISH 12 Caution with errors 13 Solving Recording Problems If you have any problems recording via your CD-R/RW drive, follow the appropriate instructions below for the source that you are using. Every CD-R or CD-RW drive records data by applying recording laser onto a CD.
14 What is Buffer Under-Run? Every CD-R or CD-RW drive records the data that the Host PC wants to record until the data flow ends. However, if the buffer becomes empty temporarily, this may cause errors in recording data. What is Auto-Run? If inserting a CD into a drive, the operating system executes the Autorun.
16 T echnical Specifications 17 ENGLISH SAMSUNG continually strives to improve its products. Both the design specifications and these user instructions are thus subject to change without notice.
An important point after buying a device Samsung SW-232 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung SW-232 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung SW-232 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung SW-232 you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung SW-232 will certainly help you make a decision on the purchase.
If you already are a holder of Samsung SW-232, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung SW-232.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung SW-232. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung SW-232 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
