Instruction/ maintenance manual of the product SU6760 Samsung
Go to page of 16
V acuum Cleaner user manual SU67 SERIES ✻ Before operating this unit, please r ead the instructions carefully . ✻ For indoor use only . English imagine the possibilities Thank you for purchasing a Samsung pr oduct. T o receive a mor e complete service, please register your pr oduct at www .
2_ Safety Information IMPOR T ANT SAFEGUARDS Thank you for purchasing a Samsung vacuum cleaner . When using an electrical appliance, basic precautions should always be followed, including the following : PLEASE READ ALL WARNINGS AND INSTRUCTIONS BEFORE USING THIS V ACUUM CLEANER.
Safety Information _3 Safety Information CAUTION/WARNING SYMBOLS USED • Before operating the appliance, please r ead this manual thoroughly and r etain it for your refer ence.
4_ contents contents ASSEMBLING THE CLEANER 05 05 Product V iew 06 Attach Handle to V acuum 06 Attach V acuum Hose and T ools OPERA TING THE CLEANER 07 07 Power Cord 07 Power Switch 08 Handle Position.
01 ASSEMBLING THE CLEANER assembling the cleaner _5 assembling the cleaner • Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedur es. • Plastic lm can be dangerous. T o avoid danger of suf focation, keep away from babies and children.
6_ assembling the cleaner A TT ACH HANDLE TO V ACUUM A TT ACH V ACUUM HOSE AND TOOLS 1. Stand the vacuum upright and slide the base of the handle firmly into the grooves at the top of the vacuum body . 2. Check to be sure the handle is tted to the vacuum body .
02 OPERA TING THE CLEANER operating the cleaner _7 operating the cleaner POWER CORD POWER SWITCH 1. The power switch is located on the top of the vacuum body . Push the rocker switch “ON” to vacuum, and “OFF” when cleaning is complete. 1. PULLING OUT The power cord is long enough to be drawn out for convenience.
8_ operating the cleaner HEIGHT ADJUSTMENT Petz Plus (Dual Brush System) 1. Place handle in upright position. 2. T ur n height adjustment knob to desired setting.
02 OPERA TING THE CLEANER operating the cleaner _9 CLEANING TOOLS CARR YING HANDLE (DUST BIN HANDLE) Attachment tools can be used to clean furniture. drapes, stairs, or in corners. Place the vacuum on the oor with handle in the upright position while using attachment tools.
10_ maintenance maintenance For maximum cleaning performance, check and clean or replace all lters as suggested. T o reduce the risk of electr onic shock, turn Power Switch Off and disconnect polarized plug from electrical outlet befor e performing maintenance or troubleshooting checks.
03 MAINTENANCE maintenance _11 The Pre-Motor Filter may be hand washed in cold water with mild detergent. Rinse well and air dry throughly befor e re-installing.
12_ maintenance maintenance CHECK BRUSH DRUM AND DRIVE BEL T Y ou should check your vacuum cleaner’ s Brush Drum and Drive Belt regulaly for wear or damage. Y ou should also clean the brush ends of strings, hair , and carpet fibers. These can wrap around the brush and hamper its ability to ef fectively clean your carpet.
03 MAINTENANCE maintenance _13 PICKER DRUM MAINTENANCE 1. Unplug cleaner from electrical outlet. 2. Place handle in low position and turn vacuum cleaner over so bottom side is up. 3. Remove the six screws as shown with a scr ewdriver . 4. Grasp Picker Drum at both ends and lift.
14_ maintenance MINI TURBO BRUSH (*select models only) T o Replace Brushr oll T o Replace Belt 1. Unplug cleaner from electrical outlet. 2. Slide the switch to the unlock position and remove bottom plate. 3. Inspect condition of brushroll. Replace brushr oll if brushes are worn down.
03 MAINTENANCE maintenance _15 1. Unplug the vacuum from electrical outlet. 2. If a clog is present or debris is visible, unscr ew the two screws on the back of the Petz T urbo Brush to remove the faceplate and clear any obstructions. 3. T o clean debris from the brushr oll, remove the brushr oll from the drive belt and clean debris.
Code No. DJ68-00503A REV(0.1) troubleshooting This V acuum cleaner is approved the following. Electromagnetic Compatibility Dir ective : 2004/108/EEC Low V oltage Directive : 2006/95/EC Check this list of possible problems and solutions befor e bringing your vacuum to a service center .
An important point after buying a device Samsung SU6760 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung SU6760 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung SU6760 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung SU6760 you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung SU6760 will certainly help you make a decision on the purchase.
If you already are a holder of Samsung SU6760, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung SU6760.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung SU6760. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung SU6760 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
