Instruction/ maintenance manual of the product STP-102S Samsung
Go to page of 18
Warning - U.S This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interface when the equipment is operated in a commercial environment.
3 Chapter 1. Unpacking 1-1. Checking the contents of the Printer 1-2. Locating the Printer 1-3. Printer Part names 1-4. Operating Control Panel 4 4 4 5 6 Table of Contents Chapter 2. Connecting the cable 2-1. Connecting the AC adapter to your printer 7 7 Chapter 3.
1-3. Printer Part Names 5 (1) Cover top (2) Case top (3) Case bottom (4) Control panel (5) Roller (6) Power switch (7) Interface connector (male) (8) DC Jack (9) Interface connector (female) (10) Roll.
7 Chapter 2. Connecting the Cable 2-1. Connecting the AC adapter to your printer When the printer is used, use te optional AC adapter, AP-1611-UV for your printer.
9 NOTE The printer must be turned off before installing the paper roll. Chapter 3. Installing the Paper Roll Use a paper roll that matches the specifications. 1. Open the printer cover and remove the used paper roll core if there is one. 2. Insert the paper roll as shown below.
11 12 DIP switch functions BPS 2400 4800 9600 19200 38400 57600 115200 Level 1 2 3 4 5 6 7 D/W1 ON OFF OFF ON ON OFF ON D/W2 OFF ON OFF OFF ON ON ON S/W3 OFF OFF ON ON OFF ON ON Dip Switch No. 1 2 3 Function Density Handshaking Reserved Language Reserved ON OFF 5 6 7 8 4 Normal DTR/DSR - Korean - Dark Xon/Xoff - Engish - Chapter 4.
13 14 Chapter 6. Code Table The following pages show the character code tables. To find the character corresponding to a hexadecimal number, count across the top of the table for the For example, 4A=J.
16 15 P C 850 : M u lt ili ngual PC 860 : Po r t ugues e.
17 18 P C 865 : N o r d ic P C 863 : Canadi an - F r enc h.
19 20 S pac e P age.
Chapter 7. Functions Commands The commands listed in the table below are available for control of the printer. Command HT LF ESC SP ESC ! ESC $ ESC % ESC & ESC * ESC - ESC 2 ESC 3 ESC ? ESC @ ESC .
23 24 HT [Name] [Format] [Description] Command Notation Horizontal tab. ASCII Hex Decimal Moves the print position to the next horizontal tab position. [Name] [Format] [Range] [Description] The name of the command. the code sequence. ASCII indicates the ASSCII equivalents.
Select bit-image mode. ASCII Hex Decimal m = 0, 1, 32, 33 0 < nL < 255 0 < nH < 3 0 < d < 255 Selects a bit-image mode using m for the number of dots specified by nL and nH, as follows. Number of data(k) = (nL + nH x 256) x 3 The nL and nH indicate the number of dots of the bit image in the horizontal direction.
27 28 n n n ESC 1B 27 J 4A 74 ESC J n [Name] [Format] [Range] [Description] Print and feed paper. ASCII Hex Decimal 0 < n < 255 Prints the data in the print buffer and feeds the paper n dots. n n n R 52 82 ESC 1B 27 ESC R n [Name] [Format] [Range] [Description] Select an international character set.
29 ESC c 5 n [Name] [Format] [Range] [Description] [Notes] Enable/Disable panel buttons. ASCII Hex Decimal 0 < n < 255 Enables or disables the panel buttons. When the LSB is 0, the panel buttons are enabled. When the LSB is 1, the panel buttons are disabled.
31 32 GS L nL nH [Name] [Format] [Range] [Description] [Notes] Set left margin. ASCII Hex Decimal 0 < nL < 255 0 < nH < 255 Sets the left margin using nL and nH in standard mode. The left margin is set to (nL + nH x 256) dots from the beginning of the line.
33 34 h 68 104 n n n GS h n [Name] [Format] [Range] [Description] Set bar code height. ASCII Hex Decimal 1 < n < 255 Set the height of the bar code. n specifies the number of dots in the vertical direction. GS 1D 29 Print bar code. ASCII Hex Decimal ASCII Hex Decimal 0 < m < 6 (k and d depends on the bar code system used.
35 APPENDIX B: Specification JF01-000012 Printing method Dot density Printing width Paper width Characters per line Printing speed Receive buffer size Supply voltage Environmental conditions MCBF Thermal line printing 200 x 200 Dpi (8 dot/mm) 48mm 58mm 42 (Font A)(12x24) ,56(Font B)(9x24) Approximately 1.
An important point after buying a device Samsung STP-102S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung STP-102S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung STP-102S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung STP-102S you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung STP-102S will certainly help you make a decision on the purchase.
If you already are a holder of Samsung STP-102S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung STP-102S.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung STP-102S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung STP-102S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
